Model NO.: ZG-2000
Plastic Processed: Full Automatic Pet Bottle Blowing Machine
Voltage: 380V/3pH/50Hz
Power: 20kw
Capacity: 2000 Bph for 500ml
Warranty: 1-2 Years
Cavity: 2 Cavities
Container Volume: 0.1-2L
Mould Material: 7075aluminum
Weight: 2550kg
Size: 6.6cbm
Trademark: ZHENGGE
Transport Package: PE Film Inside Then Wooden Case Outside Packing
Specification: 1980*1650*2020mm
Origin: Taizhou Zhengjiang China
HS Code: 8477309000
1 Liter Full Automatic Pet Plastic Bottle Stretch Blow Molding Machine (ZG-2000)
Product Description
1 Liter Full Automatic Pet Plastic Bottle Stretch Blow Molding Machine

ZG2000 is a high speed blow molding machine which is developed and manufactured by our Company using the most advanced bottle blowing technology in the world. Owing to the machine's high degree of automation, high production efficiency, high safety, high stability and reliability, the products made will not be contaminated in any intermediate steps, and it can be matched up directly with the production line of filling and can be widely used in production of mineral water, carbonic acid beverage, juice, tea and heat-resistence bottle product. Machine Settings of PET Bottle Blow moulding machine
1) PLC colour display: MITSUBISHI(JAPAN)
2) Pneumatic parts: FESTO(GERMANY)
3) Valve: FESTO (Germany)
4) Other electric parts are all world-famous brand
1 Liter Full Automatic Pet Plastic Bottle Stretch Blow Molding Machine

Machine Featuers of PET Bottle Blow moulding machine
1. Stable performance with advanced PLC.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mold.
9. Two ways of operating: Automatic and manual.
10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
12. Contamination is avoided for the bottle body.
13. Ideal effect of the chilling with the chilling system.
14. Easy installation and starting
15. Low rejection rate: Less than 0.2 percent.1 Liter Full Automatic Pet Plastic Bottle Stretch Blow Molding Machine
Model ZG-2000
Output Based on bottle shape 1500~2400pcs/h based on different volume
Product Specifications Diameter range 15mm-38mm
Container diameter 20mm-100mm
Container height 50mm-350mm
Mold Specifications Cavity 2 cavities
Mold thickness 300mm
Mold effective area 500mm*360mm
Machine Power Power Voltage 380v 3Phase /220v 3Phase  50/60HZ
Installed power /Actual power 30kw/20kw
Air Source High pressure air compressor 1.2m³/min 30Kg
Low pressure air compressor 1.6m³/min 12Kg
Air dryer 2.0 m³/ 30Kg
Blowing machine size Length*width*height/weight 1980*1650*2020mm/2000kg
Preform loader size Length*width*height/weight 1950*1350*2650 mm/550kg

 1 Liter Full Automatic Pet Plastic Bottle Stretch Blow Molding Machine

Our Service:
Pre-servise                                                                               
* Welcome to view our Factory.                                                                  
* 24 hours on line anwser your question.                                                 
* Help client choose the suitable machine.                                              
* Take video as client's request.                                                             
* Take client's other need into consideraion.
After-service
* Training how to instal the machine, training how to use the machine. 
* Engineers available to service machinery overseas.
* We provide useful documents with machine.( Machinelayout, Electricity diagram,Machine certificate, General manual book/maintenance book)
* All spare parts are always available and free for your request in first year.  
1 Liter Full Automatic Pet Plastic Bottle Stretch Blow Molding Machine              

Packaging & Delivery:
PE Film Inside Then Wooden Case Outside Packing For ZG-2000
Delivery Detail:
20 Days after payment
1 Liter Full Automatic Pet Plastic Bottle Stretch Blow Molding Machine
 

Shredder

SR series Single shaft shredder is a crushing machine with perfect design. It`s wide used and qualified to shred various waste materials such as plastic block & pipes, woven bags, cable, wood, paper, domestic rubbish, electronic waste and so on. The suitable screen can be chosen according to fed materials and the next processing requirement. The output material discharged by the shredder could be directly reused or further shred into small pieces. SR series shredder can be equipped with many different rotor and its rotor process requirements of cooling system, bead weld & wearing layer can also be additionally added according to customers` requests for disposing various waste materials.

Aluminum Shavings Shredder, Steel Shavings Shredder, Aluminum Shredder, Steel Shredder, Metal Shredder

Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-metalsrecycling.com

Posted on