*. PTC heating,overheat protection, work quiet.
What is the heating effect of the air heater? Electric Heaters,Room Heater,Mini Heaters,Desk Heater Shenzhen Ewong Technology CO.LTD , https://www.ewong-tech.com
(price for 90MM Screw elements: 1.8 USD per mm)
(price for TSE-95 barrel: 1300 per piece 360mm)
SPECIFICATONS
1. Extruder replace parts
2. High quality, high accuracy
3. Screw: W6Mo5Cr4V2.38CrMoAl. SKD11. SACM645 etc
Description:
The flexible modular principle is realized with screw barrel sections from the wide
Range ofdifferent designs possible. Fast, intensive and uniform heating ofthe screw
Barrel section is ensured by electrical heaters. The barrel sections are cooled with
Water, by means ofan internal bore system, with bores arranged close to the inside
Barrel wall.
Barrel sections are available as:
Closed barrel section
Barrel section with opening for material feed or for devolatilization
The processing section is provided with stainless steel plates as a protection against
Accidental contact.
Screw Elements: High-speed steel W6Mo5Cr4V2, nitrogen treatment.
Screw Shaft: High performance alloy steels, 40CrNiMoA; With standing high load, Etc
Description
The inter meshing screws co-rotate and wipe each other with narrow clearance so that
No residues are left in the screw flight and clean effort is thus reduce.
Screw elements with various pitches and lengths
Kneading blocks with various angles ofstagger, numbers ofkneading disks and disk
Widths.
Screw tips to fix the screw set axially
Gear teeth connection to ensure power flow between the screw shaft and screw
Elements.
Features:
1. Screw components designed by computer aids is kneading type, has excellent self-cleaning function, the new kneading block design effectively avoid the problems of overheating and energy consumption.
2. According to process system and formula requirements, the unit can optimize its L/D ratio, barrel structure, screw array, venting number and location, feeding method, electrical control methods etc. For rational allocation.
Packaging for exports:
Package: Wooden case or Using Anti-rust oil processing, then use stretch film cover extruder against moisture damage.
Shipping: By sea or By express
Company Information
Nanjing HaiSi Extrusion Equipment Co., Ltd is a High-Tech company, which is composed of well-experienced team in R&D, manufacturing technique, sales service and basing on extruder industry for many years. Our company is a professional manufacture of high quality pelletizing extruders for coloring/ dyeing and master batch production, as well as plastic modification and compounding, plastic recycling. Innovative machines are built as per the concept of durability, high efficiency and economical power consumption.
Our machine types:
1. Co-Rotating Parallel Twin Screw Pelletizing Extruders
2. Single Screw Pelletizing Extruders
3. Die Face Cut (Air Cooling) Pelletizing Extruders
4. Double Stage /Â Double Degassing Recycling Extruders
5. Crushers, Mixers, Storage Tanks, Vibrators, Granulators, Blowers
6. Extruder spare parts
We are manufacturer of twin screw extruder, also can supply all the spare parts.
Like screw, barrel, feeder, die head electric controller and gearbox.
Â
Base Material
1) 38CrMoAlA(JIS SACM645) 2)Cr12MOV(JIS SKD-11)
3) 4Cr5MoSiV1(JIS SKD-61) 4) 42CrMo(AISI 4140)
Bimetallic Alloy Material
1)Fe-based alloy 2)Ni-based alloy/Deloro alloy
3)Co-based alloy 4)NiCo-based alloy
5)Tungsten carbide/Wolfram carbideSurface Treatment
1.Heat treatment
2.High frequency treatment
3.Nitriding treatment
Nitrided case depth: 0.50-0.80mm
Nitrided hardness: HV850-1020 (HRC57-65)
4.Hard chrome plating treatment
Chromium-plating layer depth: 0.05-0.10mm
Chromium-plating layer hardness: more than 950HV
5Nickel alloy plating treatment
Bimetallic barrel: centrifugal casting (Inlay alloy)
Bimetallic screw: plasma alloy coating spraying Bimetallic layer depth: 0.8-2.0mm Bimetallic layer hardness: HRC 57-72 Basic Information
Nitride Brittleness
≤Grade Two
Surface Roughness
Ra0.4um
Screw Straightness
0.015mm
Hardness after hardening and tempering
0.025~0.10mm
Material Application
1)General plastics
2)ABS,PA,PC,PE,PET,PS,PU,PVC,U-PVC 3) PA+GF (Glass Fiber) 4)Flame-resistant reinforced plastics 5)Modified engineering plastics 6)All kinds of mixed recycled materials
General Terms
Means of transport: Ocean, Air, Express
Production time: 20-25 days after order 
Â
twin screw barrel for plastic extruder
(price for 90MM Screw elements: 1.8 USD per mm)
(price for TSE-95 barrel: 1300 per piece 360mm)
SPECIFICATONS
1. Extruder replace parts
2. High quality, high accuracy
3. Screw: W6Mo5Cr4V2.38CrMoAl. SKD11. SACM645 etc
Description:
The flexible modular principle is realized with screw barrel sections from the wide
Range ofdifferent designs possible. Fast, intensive and uniform heating ofthe screw
Barrel section is ensured by electrical heaters. The barrel sections are cooled with
Water, by means ofan internal bore system, with bores arranged close to the inside
Barrel wall.
Barrel sections are available as:
Closed barrel section
Barrel section with opening for material feed or for devolatilization
The processing section is provided with stainless steel plates as a protection against
Accidental contact.
Screw Elements: High-speed steel W6Mo5Cr4V2, nitrogen treatment.
Screw Shaft: High performance alloy steels, 40CrNiMoA; With standing high load, Etc
Description
The inter meshing screws co-rotate and wipe each other with narrow clearance so that
No residues are left in the screw flight and clean effort is thus reduce.
Screw elements with various pitches and lengths
Kneading blocks with various angles ofstagger, numbers ofkneading disks and disk
Widths.
Screw tips to fix the screw set axially
Gear teeth connection to ensure power flow between the screw shaft and screw
Elements.
Features:
1. Screw components designed by computer aids is kneading type, has excellent self-cleaning function, the new kneading block design effectively avoid the problems of overheating and energy consumption.
2. According to process system and formula requirements, the unit can optimize its L/D ratio, barrel structure, screw array, venting number and location, feeding method, electrical control methods etc. For rational allocation.
Packaging for exports:
Package: Wooden case or Using Anti-rust oil processing, then use stretch film cover extruder against moisture damage.
Shipping: By sea or By express
Company Information
Nanjing HaiSi Extrusion Equipment Co., Ltd is a High-Tech company, which is composed of well-experienced team in R&D, manufacturing technique, sales service and basing on extruder industry for many years. Our company is a professional manufacture of high quality pelletizing extruders for coloring/ dyeing and master batch production, as well as plastic modification and compounding, plastic recycling. Innovative machines are built as per the concept of durability, high efficiency and economical power consumption.
Our machine types:
1. Co-Rotating Parallel Twin Screw Pelletizing Extruders
2. Single Screw Pelletizing Extruders
3. Die Face Cut (Air Cooling) Pelletizing Extruders
4. Double Stage /Â Double Degassing Recycling Extruders
5. Crushers, Mixers, Storage Tanks, Vibrators, Granulators, Blowers
6. Extruder spare parts
We are manufacturer of twin screw extruder, also can supply all the spare parts.
Like screw, barrel, feeder, die head electric controller and gearbox.
Â
Base Material
1) 38CrMoAlA(JIS SACM645) 2)Cr12MOV(JIS SKD-11)
3) 4Cr5MoSiV1(JIS SKD-61) 4) 42CrMo(AISI 4140)
Bimetallic Alloy Material
1)Fe-based alloy 2)Ni-based alloy/Deloro alloy
3)Co-based alloy 4)NiCo-based alloy
5)Tungsten carbide/Wolfram carbideSurface Treatment
1.Heat treatment
2.High frequency treatment
3.Nitriding treatment
Nitrided case depth: 0.50-0.80mm
Nitrided hardness: HV850-1020 (HRC57-65)
4.Hard chrome plating treatment
Chromium-plating layer depth: 0.05-0.10mm
Chromium-plating layer hardness: more than 950HV
5Nickel alloy plating treatment
Bimetallic barrel: centrifugal casting (Inlay alloy)
Bimetallic screw: plasma alloy coating spraying Bimetallic layer depth: 0.8-2.0mm Bimetallic layer hardness: HRC 57-72 Basic Information
Nitride Brittleness
≤Grade Two
Surface Roughness
Ra0.4um
Screw Straightness
0.015mm
Hardness after hardening and tempering
0.025~0.10mm
Material Application
1)General plastics
2)ABS,PA,PC,PE,PET,PS,PU,PVC,U-PVC 3) PA+GF (Glass Fiber) 4)Flame-resistant reinforced plastics 5)Modified engineering plastics 6)All kinds of mixed recycled materials
General Terms
Means of transport: Ocean, Air, Express
Production time: 20-25 days after order
Â
*. Large hot air outlet, instant get warm and hot.
*. One key and Two gear heating air optional.
*. Novel and beautiful design, easy to operate.
*. Work quietly and safe, natural warm breeze.
The heating effect of the air heater is not good. Where do you use it? Relatively speaking, the heating effect of the air heater is very good compared with other heating equipment. The air heater is also called industrial air heater, which has a wide range of applications,
Factory workshop: because the workshop space of many large factories is relatively large, it is basically impossible to use ordinary heating methods in such a large space, and it will also cause a lot of waste of infrastructure construction costs and later operation costs. At this time, you need to install industrial air heaters in your workshop. They are specially designed for tall spaces.
Material warehouse: many material warehouses have poor ventilation, and some are directly underground warehouses. They are easy to be wet without sunshine, especially in winter. At this time, it is only necessary to equip an industrial air heater in the material warehouse, which can not only keep warm, but also moisture-proof and dry. The key is to move easily and facilitate the oil mine: for some workers working under the mine, the underground working environment is very bad. Only by improving the working environment can work efficiency be improved, so the heating project is launched, In order to bring greater economic benefits to business owners. At the same time, for some energy mines, it is more related to heating safety, but the industrial heating function is very good and competent for this work
Model NO.: TSE
Screw Length: 290mm X Segment
L/D: 12:1 - 48:1
Identification: Ce ISO9001
Type: Parallel Twin Screw
Trademark: HS
Transport Package: Packed in Wooden with Soft Plastic
Specification: CE. ISO 9001
Origin: Jiangsu. Nanjing
HS Code: 84772090
Model NO.: TSE
Screw Length: 290mm X Segment
L/D: 12:1 - 48:1
Identification: Ce ISO9001
Type: Parallel Twin Screw
Trademark: HS
Transport Package: Packed in Wooden with Soft Plastic
Specification: CE. ISO 9001
Origin: Jiangsu. Nanjing
HS Code: 84772090
twin screw barrel for plastic extruder