Rollers for Escalator Spare Part, Escalator Reversing Chainwheel, Escalator Step Chainwheel, Step Wheel Bearing Ningbo Xinda Elevator Traction Technology Co., Ltd. , https://www.nbelevator.de
1. The hydraulic pulling glass steel sections pultrusion equipment: Including mold frame, hydraulic station, the tractor and run temperature electronic control box.Â
2. Pultrusion equipment line also includes the following auxiliary equipment.Â
1)creel, dipping tank and frame profiles
2) electric cutting machine felt
3)manual lifting resin mixer
4)manually type water spray kowtow profile cutting machine
5)the hydraulic propulsion water spray profile cutting machine; (hydraulic propulsion cut length dimension alarm)
6)the hydraulic propulsion sprinkler profile automatically length cutting system; (hydraulic propulsion cut, Japan's Omron Encoder length)
7)hydraulic oil cooling with cooling tower and water tanks, pumps
FRP GRP Pultrusion Machine with Hydraulic Station
Typical pultrusion process:Â
Fiberglass roving &Â continues mat- Saturate with resin in the resin bath -Â Preforming system- Pultrusion and curing die- Pulling system- Cut off saw -Â Products
Pultrusion equipment hydraulic traction Technical parameters:Â
1. The entire production line layout length 20-30 meters, width 3Â meters (about 60-100 square meters). Our company can provide the production line layout.Â
2. The host part of steel, stainless steel panels, side panels using paint.Â
3. Traction gantry working size demand processing.Â
4. Hydraulic station: I used the latest technology: A plurality of sets of pump-pump (forward speed to ensure stable). Hydraulic parts are stacked cramping (easy maintenance), and can be adjusted stepless tension and clamping force. Traction speed with precision throttle, to ensure the stability of traction speed and traction speed stepless adjustment. Hydraulic station with a switch, can achieve hydraulic oil heating cooling, to ensure the normal operation of the hydraulic system.Â
5. Using the function: A single, manually operated doors and Ssangyong Ssangyong door automatic reciprocating operation function. Automatic intermittent time can be set automatically, and a tension sensor feedback actual production.Â
6. Three-stage thermal control zone temperature controller, a heating temperature of the mold to achieve automatic control.Â
Hydraulic reciprocating fiberglass pultrusion equipment
Main specifications and parameters
Â
Model
Motor power
Heating power
Traction
 Speed
 Section
Hydraulic pressure
Barometric pressure
BGSB-WF-5020
10.8KW
3-20KW
100KN
 0.1-1m/min
 0.5mx0.2m
 2-16Mpa
 0.4-0.6Mpa
BGSB-WF-8030
10.8KW
3-20KW
200-300KN
 0.1-1m/min
 0.8mx0.3m
 2-16Mpa
 0.4-0.6Mpa
FEATURES
-for large cross section pultruded profiles design, strong traction, smooth and reliable operation
-set debug, two kinds of continuous traction, easy adjustment of the production process
-good dual hydraulic system, the system of anti-interference ability mutual
-cooler with power, easy to achieve 24-hour operation
-main electrical and hydraulic components used internationally renowned brands, high sensitivity, low failure rate
-fault warning function
Hydraulic pultrusion machine working principle and the constituent components:Â
(1) The working principle of hydraulic pultrusion machine after the fiberglass molding material in the mold is heated, and then by two clamping gantry alternately operating the traction continuously drawn out, to give the desired variety of glass and steel sections.Â
(2) hydraulic type pultrusion machine consists of mechanical, hydraulic and electrical three parts. Mechanical part by a warming rack, rack, and two clamping gantry composition; Hydraulic part by two mutually independent hydraulic system components, which are by the oil pump, the clamping cylinder, thrust cylinders, integrated valve block, control valve, oil filter valves, oil filters, coolers, and fuel tank and other components; Electrical Parts include heaters, thermostats, motors, control boxes.Â
Hydraulic pultrusion machine classified by tonnage and advantages:Â
Depending on the traction, hydraulic pultrusion machine is divided into: 12 tons, 16 tons and 20 tons. Choose traction depends on the size of FRP profiles specifications.Â
Benefits include hydraulic pultrusion machine: Simple and continuous operation, low operating costs, high reliability and productivity. 
Packing & Delivery
We use standard exporting packages, including wood blocks and ropes to fix the machine in the container to prevent any damage during the transportation.
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory manufacture in Hebei, welcome you come to visit.
Q: How long is your delivery time?
A: Usually 30 days after receive your payment.Â
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance.Â
  Payment>=1000USD, 30% T/T in advance ,balance before shippment.
  L/C at sight also acceptable.  Â
We can making professional solutions for you !
Â
Product
Specifications
Model NO.: swjy-pum
Delivery Detail: Within 20 Days After Receive Payment
Warrenty: 1 Year
Voltage: 380V
Using Life: 15 Years
Capacity: 40t
Machine Size: 9.6X1.2X0.9m
Travel Distance: 650mm
Cutting Speed: 285rmp
Application: Contruction
General Power: 32kw
Trademark: SWJY
Transport Package: According to Client′s Request
Specification: CE
Origin: Hebei
HS Code: 8477209000
                       Pultrusion Machine equipment for FRP Profile