Model NO.: CHC
Certification: CE, ISO9001:2000
Condition: New
Color: Yellow,Red,Green, etc.
Capacity: 0.5t-20t
Standard Lift Height: 2.5m, 3m or Upon Your Request
Chain: G80 Load Chain
Trademark: H-LIFT or OEM
Transport Package: Carton + Pallet
Specification: CE
Origin: Zhejiang, China
HS Code: 8425190000
Model NO.: CHC
Certification: CE, ISO9001:2000
Condition: New
Color: Yellow,Red,Green, etc.
Capacity: 0.5t-20t
Standard Lift Height: 2.5m, 3m or Upon Your Request
Chain: G80 Load Chain
Trademark: H-LIFT or OEM
Transport Package: Carton + Pallet
Specification: CE
Origin: Zhejiang, China
HS Code: 8425190000
H-Lift CHC Type Hand Chain Hoist/Chain Pulley Block:

1. Robust all steel construction, capacities from 500 kgs up to 20 tons.
2. All rotating components mounted on roller of ball bearings to reduce friction and increase efficiency.
3. Fully enclosed automatic load brake with asbestos free friction discs.
4. Fully enclosed stamped steel housing allows also outdoor use.
5. The drop forged suspension and load hooks that yield under overload instead of breaking are made from non-ageing, high tensile steel. The hooks are fitted with robust safety latches and are free to rotate 360 degrees.
6. Two stage reduction gear. Hardened gears and pinions are roller bearing supported, thus increasing efficiency
7. Hardened load sheave with four precision machined chain pockets. Roller bearings for smooth operation and low wear
8. Hand chain cover and slots accurately guide the hand chain
Two guide rollers and one chain stripper ensure accurate alignment of the load chain over the load sheave.
9. G-80 zinc plated RUD chain from Germany or FEC chain from Japan available upon request.
Overload protection device is available upon request, the device can be fitted at a later date without problem.
10. H-LIFT chain hoist is factory tested with overload. Test certificate is available with serial number and EC declaration of conformity.


H-Lift manual chain hoists are commonly known as chain blocks and are designed for heavy duty lifting and materials handling operations. Chain blocks raise and lower loads by pulling on the hand chain. Chain blocks can be of single or double fall configurations depending on the capacity of the block.
Model CHC005 CHC010 CHC015 CHC020 CHC020D CHC030 CHC050 CHC100 CHC200
Capacity (ton) 0.5 1 1.5 2 2 3 5 10 20
Standard lift (m) 2.5 2.5 2.5 3 3 3 3 3 3
Running test load (Kn) 7.5 15 22.5 30 30 45 75 150 250
Effort required to lift max. load (N) 221 304 343 410 314 343 414 414 828
Headroom(Drawn close up) Hmin (mm) 255 306 368 368 444 486 616 750 1000
Number of chain strands 1 1 1 1 2 2 2 4 8
Load chain diameter (mm) 6 6 8 8 6 8 10 10 10
Hook opening (mm) 30 34 38 41 41 48 52 64 85
Dimensions (mm) A 113 126 141 141 126 141 163 163 191
B 125 147 183 183 147 183 215 404.5 595
C 255 306 368 368 444 486 616 750 1000
Net weight (kg) 8.5 11 18 18 15 27 42 83 193
Extra weight per meter extra lift (kg) 1.7 1.7 2.3 2.3 2.5 3.7 5.3 9.7 19.4



  H-Lift CHC Type Hand Chain Hoist/Chain Pulley Block:

1. Robust all steel construction, capacities from 500 kgs up to 20 tons.
2. All rotating components mounted on roller of ball bearings to reduce friction and increase efficiency.
3. Fully enclosed automatic load brake with asbestos free friction discs.
4. Fully enclosed stamped steel housing allows also outdoor use.
5. The drop forged suspension and load hooks that yield under overload instead of breaking are made from non-ageing, high tensile steel. The hooks are fitted with robust safety latches and are free to rotate 360 degrees.
6. Two stage reduction gear. Hardened gears and pinions are roller bearing supported, thus increasing efficiency
7. Hardened load sheave with four precision machined chain pockets. Roller bearings for smooth operation and low wear
8. Hand chain cover and slots accurately guide the hand chain
Two guide rollers and one chain stripper ensure accurate alignment of the load chain over the load sheave.
9. G-80 zinc plated RUD chain from Germany or FEC chain from Japan available upon request.
Overload protection device is available upon request, the device can be fitted at a later date without problem.
10. H-LIFT chain hoist is factory tested with overload. Test certificate is available with serial number and EC declaration of conformity.


H-Lift manual chain hoists are commonly known as chain blocks and are designed for heavy duty lifting and materials handling operations. Chain blocks raise and lower loads by pulling on the hand chain. Chain blocks can be of single or double fall configurations depending on the capacity of the block.
Model CHC005 CHC010 CHC015 CHC020 CHC020D CHC030 CHC050 CHC100 CHC200
Capacity (ton) 0.5 1 1.5 2 2 3 5 10 20
Standard lift (m) 2.5 2.5 2.5 3 3 3 3 3 3
Running test load (Kn) 7.5 15 22.5 30 30 45 75 150 250
Effort required to lift max. load (N) 221 304 343 410 314 343 414 414 828
Headroom(Drawn close up) Hmin (mm) 255 306 368 368 444 486 616 750 1000
Number of chain strands 1 1 1 1 2 2 2 4 8
Load chain diameter (mm) 6 6 8 8 6 8 10 10 10
Hook opening (mm) 30 34 38 41 41 48 52 64 85
Dimensions (mm) A 113 126 141 141 126 141 163 163 191
B 125 147 183 183 147 183 215 404.5 595
C 255 306 368 368 444 486 616 750 1000
Net weight (kg) 8.5 11 18 18 15 27 42 83 193
Extra weight per meter extra lift (kg) 1.7 1.7 2.3 2.3 2.5 3.7 5.3 9.7 19.4



 

CNC Glass Engraving Machine

CNC glass Engraving Machine a special model specially designed for glass processing by our team through years of research. The spindle system and body of this model are completely to work for glass. Machining work design. Based on the advantages of similar international products and the summary of our own practice, our team has successfully designed a professional machining center with high quality processing performance and high cost performance.

Cnc Glass Engraving Machine,Glass Engraving Machine,Cnc Glass Engraving Machine Modification,Automatically Cnc Glass Engraving Machine

JINAN WEILI MACHINE CO LTD , https://www.wlglassmachines.com

Posted on