2.5HP petrol small outboard motor

Function and feature:


1.2 stroke 2.5HP, 2.0HP

2. It is good little motor for small inflatable boat

FAQ:
What size motors do people put on the base?
This is 2 stroke 2.5HP, we have other two items 2 stroke 2.0HP and 4 stroke 1.5HP

Can the base handle a 3 or 5 hsp motor?
No, this only can be 2.0HP, 2.5 HP, or 1.5HP.

How is this unit in salt water? Is it mostly aluminum and plastic parts or is there steel that will rust?
It is aluminium alloy + sforzato nylon, there isn't steel will rust.

Is the 4 stroke a lot quieter than the 2 stroke?
Yes, 4 stroke is quieter than 2 stroke. But the most important difference between them is that
4 stroke outboard motor's fuel oil consumption is just 40% of the 2 strke outboard motor.

Have you tried a small electric motor on the shaft yet?
Not yet. We don't suggest use electric motor. Electric motor is samll power, cruising ability will not good.
Just wondering if the shaft can handle 2.5 hsp 2 stroke, why can't it handle 2.5 hsp 4 stroke? Both are same hsp?
The engine not more than 2.5HP is suitable for the shaft. If more than 2.5HP, the propeller will idle. So we don't suggest using big HP engine on this shaft.

And now we only have 4 stroke 1.5HP engine. So if you really want 4 stroke 2.5HP outboard motor. I suggest you can buy our shaft, and you install the 4 stroke 2.5HP on it.

What type of gasoline do these outboard motors use?
90# above unleaked petrol

How long can it drive when fill in gasoline, and how many time?
18 km, 40-50 minutes

Speed?
2~4 people 10~18 km/h

Is the engine air cooled?
Yes

What is the noisy of 4 stroke engine?
90-100 db

What is the noisy of 2 stroke engine?
About 114 db
Overall Length 87cm
Overall Width 38cm
Overall Height 25cm
Transom Height 42cm
Weight 9.6kgs
Full Throttle Operating Rang 7000rpm
Maximum Output 1.7kw/7000rpm
Idling Speed(in neutral) 3000
Cylinders 1
Displacement 51.7CC
Gear Positions Forward-Neutral
Gear Ratio 2.08(27/13)
Integral Fuel Tank Capicity 750ml
Propeller Options* 7-1/4*5-A inch
Speed  2~4 people 10~18km/h

Servo hydraulic injection machine

Micro Servo Motor Injection Moulding Machine,Customized Injection Plastic Mold,90 Ton Injection Molding Machine,Small Plastic Injection

Turn Machine (Zhejiang) Co., Ltd , https://www.turn-machine.com

Posted on