While driving a residential vehicle is similar to that of driving other vehicles, in order to ensure the safety of family members and their own travel, it is necessary to ensure that the motor vehicle does not experience any technical problems before traveling. Read the relevant contents of the instructions provided by the manufacturer when the car is leaving the factory. 1. During the process of using a residential vehicle, the gas system and braking system cannot be converted or reconstructed without permission. If the two systems of the vehicle need to undergo any adjustment and operation, they can only make it professional. Repair the maintenance of the residential vehicle. 2. If there is any safety fault to the driver, the occupant, or the vehicle itself, it is supposed to be delivered to the professional maintenance personnel for maintenance and adjustment. 3. Any item or baggage that the RV needs to load cannot exceed the total weight of the RV in the capacity it can bear. 4, in order to better protect the safety of the use of residential vehicles, such as regular inspections and maintenance of residential vehicles. 5. If it is necessary to renovate a residential vehicle, it can only be delivered to a manufacturer that has relevant qualifications and is already authorized to carry out refitting of a residential vehicle or is a repair shop. In addition, in the use of residential vehicles, domestic waste generated as well as waste water should not be directly discharged into open spaces or drains. Even if the waste water tank is not completely full, it needs to be discharged at any time, so as to ensure the clean-up of the health of the RV. If there is a condition, after the waste water tank is emptied every time, the clean water is used to clean the drain pipe and the water tank. The toilet in the vehicle cannot be completely filled and then cleaned. The toilet needs to be emptied at regular intervals. At least, it is necessary to discharge the toilet light when it is on. Garbage inside the car must be handled regularly to avoid any odors affecting the air. Water Temperature Control Unit
Product Description
Brief introduction
KEWH series water heaters have both standard and high temperature models, which are used to heat up the mould and maintain temperature, although they can be used in other similar applications. High temperature water from the mould is returned to the cooling tank and cooled by either indirect cooling (For high temperature and high temperature plus pressure models) or direct cooling (For standard models). It is then pressurised by the high-pressure pump, sent to the heating tank and finally to the mould with a constant temperature. The KASSEL temperature controller can maintain an accuracy of ±1°C.
Standard Equipment
1. LCD Display, Choice of Language,
2. Siemens control parts,
3. Electric Cabinet Separation design
4. Over temperature Trip.
5. Return Temperature Display
6. Auto Ventilation
7. Safety Valve,
Water Temperature Control Unit,Water TCU,Water Temperature Control Units (TCU),Water Circulating Temperature Control Units Kassel Machinery (zhejiang) Co., Ltd. , https://www.kassel-group.com