Automatic assembly and coating product line and developed process-flow ensure the outstanding ability of anticorrosion and flawless appearances of products. Metal Seated Gate Valve,Ductile Iron Metal Seat Gate Valve,Hard Seal Gate Valve,Hard Faced Gate Valve SUZHOU YUEDA VALVE CO., LTD. , https://www.jsyuedavalve.com
Anti-corrosion performance:
Indide and outside surfaces of the body are coated with electrostatic epoxy resin powder. The coating is even and firm with good adhesion and excellent anti-corrosion.
The shaker is a patented new product of Pinggui Machinery Factory, which was put into production in the late 1980s and has obvious advantages.
Wherein hyperbolic ridges of the table is increased by two stripes region (below), a single straight bar into two-bed flat swash two hyperbolic contoured for ferrous metals, ferrous, rare and precious metal ores The selection of 0.019~3mm grain size, when the slurry is fed, the inclined strip section forces the ore particles to move in the longitudinal direction, against the oblique water flow caused by the complex strip, so that the light and heavy mineral particles crawl speed difference and off-angle The difference is increased; while the parallel strips make the concentrate strip thin and uniform and discharge in time, improving the sorting conditions, which can significantly improve the treatment capacity and beneficiation recovery rate under the control of certain sorting indicators. It is fully suitable for rough selection and selection of metal concentrators.
The shaker uses an eccentric link bed.
Figure