Jianghuai Kangling 1700 wide cab, 3308 wheelbase, 5-speed gearbox, 650R16 steel wire tires, with turn, original air conditioning, with ABS, front axle 2.5 tons, rear axle 3.5 tons. Jianghuai Chaochai 117 horsepower engine / 143 horsepower engine in the cloud, there are environmental announcements. The whole vehicle adopts one-time non-slip punching plate, the plate width is 2.3 meters, the plate length is 4.2 meters, and the other 1 meter flip plate or expansion plate! Total mass (Kg) 4495 Tank volume (m3) Rated load mass (Kg) Dimensions (mm) 5995×2300×2350 Curing quality (Kg) 3605 Cargo size (mm) × × Rated passenger (person) Quasi-trailer total mass (Kg) Number of passengers in the cab (person) 2 Load mass utilization factor close to the angle / departure angle (°) 20/15 Front overhang / rear overhang (mm) 1085/1602 Number of axes 2 Wheelbase (mm) 3308 Axle load (Kg) 1620/2875 Maximum speed (Km/h) 90 Other optional swing arm plate units and rear plates. Lifting weight: 760kg; protective device material: Q235, connection method: bolted connection; due to the special structure of the vehicle, there is no need to install the rear lower guard. ABS controller model and manufacturer: CM4XL-4S/4M, Guangzhou Kemi Automotive Electronic Control Technology Co., Ltd. (This article comes from Xiagong Chusheng)
H finned tube is called square finned tube, there are two types of H finned tube, one is a single tube, usually called square finned tube, the other is a double tube, usually called rectangular finned tube. And according to customer requirements manufacturing. Due to its rectangular shape, it provides a larger surface area than spiral finned tubes. Because of the larger surface area available, these finned tubes are primarily used in air heating applications to reduce the overall size of the equipment.
H-shaped finned tubes have a high area expansion rate, less dust accumulation, and high heat transfer efficiency. In the case of equivalent heat transfer capacity, the heat exchanger can occupy the smallest space, and can minimize high-grade materials (ie, pressure tubes) The amount of use, and more use of low-grade materials,( 1919113,fins). For new engineering projects, the height of the heat exchanger arrangement can be reduced, the overall weight is greatly reduced, the load of the suspension system is reduced, and the overall cost is reduced; for the renovation project, as much heat exchange area as possible can be arranged in a limited space to reduce the exhaust temperature , Improve the efficiency of waste heat recovery or increase the maintenance space for easy maintenance.
H/HH Type Fin Tube,Square Steel Pipe,Seamless Square Tubing,Square Galvanized Pipe,Seamless Square Steel Tube Murphy Thermal Energy Co., Ltd. , https://www.murphyfinnedtube.com
