It is understood that many wrecker owners are now concerned about how to reduce the cost of vehicles, as the cost continues to climb, the owners have to streamline any of the details of the savings. We know that tires are actually a consumable item that costs a lot during the car's use. If improper use leads to abnormal wear and tear, it can be a huge blow to the owner's wallet! Although we cannot control the price of the tires, we can control the tires to a large extent. The wear and tear will maximize the service life of the tires. This is the knowledge that drivers of the wrecker must master. Below Xiagong Chusheng (Hubei) Special Purpose Vehicle Manufacturing Co., Ltd. will summarize several tips to reduce the wear of the wrecker tires.

     First, the tire pressure of wrecker tires should be checked regularly, and defects such as cracks and deformations on the tire surface should be regularly checked. The groove of the tire gradually becomes lighter due to wear and tear. If it wears flat, it will lose the effect of drainage and anti-slip. The performance of the car will be greatly reduced, and the seemingly small cracks are the hidden dangers of puncture at high speeds.

     Second, the wrecker driver avoids sudden braking. Do not start too aggressively. Avoid frequent use of brakes and emergency brakes to avoid accelerated tread wear due to tires and ground dragging; proper control of corner car traffic, overtaking, crossings, narrow roads, railroad crossings, etc. Speed ​​and pay attention to the dynamics of the road surface, pedestrians, and vehicles, make preparations for braking, reduce frequent braking, and avoid emergency braking, thereby reducing tire wear.

      Third, develop good driving habits. When driving in the road maintenance construction section, the method of slowly selecting the road surface is adopted to prevent the tire from being excessively hit and even stabbed or scratched. To control the speed, the turning of the vehicle should be based on the curved road conditions and the turning radius. Generally, the vehicle should be decelerated appropriately so as to avoid the unilateral tyre wear of the wrecker due to the inertia force and centrifugal force .

Component Lead Cutting Machine

Component lead cutting machine,pipe feeds,cuts,kicks,collects

SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.singsunautomatics.com

Posted on