Man Nox Sensor,24V Nox Sensor,Nox Nitrogen Oxygen Sensor,Truck Parts Oxyen Sensor HangZhou Changchen Industrial Co.Ltd. , https://www.hzcc16.com
The nuclear phase analyzer consists of two detection transmitting devices and a receiving host. The two detection transmitters can determine whether the line is charged and then send out the measured phase and frequency signals. The receiving host receives two signals sent back by the transmitting device to determine whether the two lines are in phase.
The safety precautions for the developed wireless high-voltage phase detector are as follows:
1. During the field test of the nuclear phase meter, the operator should operate according to the high-voltage test safety distance standard of the power department.
2. The nuclear phase meter is equipped with 3.1 m insulation rods and the corresponding voltage level is ≤220KV. If the measured line voltage is higher than 35KV, use an insulating rod longer than 3.1 meters. Insulation rods should be subjected to corresponding pressure test before use.
3, nuclear phase instrument nuclear phase operation, hand-held position does not exceed the insulation rod handle position.
Dear Customer:
Thank you for your attention to our products. In addition to this product introduction, the company also has insulation ladders, high-voltage insulation mats, cable fault testers, high-voltage measuring instruments, insulation boots gloves pressure test equipment, power safety equipment cabinets, etc. Introduction, if you are interested in our products, welcome to inquire. Thank you!
Nuclear phase analyzer manufacturers