Gas Type Roller Annealing Furnace Natural Gas Furnace,Normalizing Furnace,Gas Annealing Furnace,Roller Annealing Furnace Changxing Jiacheng Furnace Industry Co. Ltd , https://www.jcfurnace.com
It uses water as the power to deliver water. It has the characteristics of not consuming electricity, oil, coal and other energy. It automatically raises water day and night, with high lift, simple management and long service life. It is used for water shortage, electricity-free mountainous areas, irrigation in semi-mountainous areas, water for human and livestock, and sprinkler irrigation in mountain orchards. If the combination of “saving and storage†is adopted, it can solve the drought-resistant water in mountainous areas. At the same time, it has the far-reaching significance of saving energy and no environmental pollution.
Commonly used water hammer pumps are available in two models, BIL-630 and BIL-420. It means that the inlet and outlet pipes are 6 inches into 3 inches and 4 inches into 2 inches.
Installation environment (conditions): 1. The water resources of the low head are sufficient. It is best to have running water for many years and meet the water demand (the water flow can be 2 to 3 treadmill water). 2, there is a certain drop (1.5 meters to 4 meters, the best is 4 meters) of the stream, the outside of the reservoir dam or the artificial drain of the channel. 3. Living water or irrigation water is required at high places.
Construction investment: 1. The price of the water hammer pump machinery itself is about 12,000 yuan. 2, water hammer pump water 4 to 6 inches seamless steel pipe 32 meters, water pipe 2 to 4 inches tap water pipe tens of meters to hundreds of meters, 20 to 30 meters after leaving the water hammer pump can be replaced with plastic pipe. 3. The concrete machine seat of the water hammer pump, the concrete anti-shock pier of the inlet pipe, the storage tank of about 2 cubic meters of the inlet pipe, the reservoir of the larger volume of the water supply destination, etc. The above three total cost is about 50,000 yuan.
Economic Benefits: The service life of the water hammer pump is very long. It can be used for about 30 years. The maintenance cost is also very low. It does not need to build a machine room. It does not require special personnel to be on duty. Just change the sealing ring and apply paint once a year. The water hammer pump has a large amount of water and a large amount of water and a high lifting head. The height can reach 30 meters or even higher, of course, the higher the flow rate, the smaller the flow. At a water lift height of 30 meters, the machine with a water pumping capacity of 630 for 24 hours is 70 tons, and the machine for 420 is 18.7 tons. In terms of economic benefits, don't say that water hammer pumps can be used because there is no electricity. It is also very economical to use water hammer pumps in areas with electricity.
The water hammer pump application is an old and advanced technology. It is an efficient water lifting device that directly converts low head energy into high head energy using the water hammer effect. Foreign countries have studied the theory and structure of the application for more than 200 years, and the technology is relatively mature. Low drop water can be used to deliver high lift water.