Â
Introduction:
    The ultrasonic sieving machine is a kind of high precision sieve filter machine, which uses both the vertical vibrating motor and ultrasonic transmitter as its vibrating source. By adding the ultrasonic wave to the screen, it can be widely used in any industries needing to sieve and filter high value-added micropowder.
Principle:
     The ultrasonic vibrating screen can convert 220V/50HZ and 110V/60HZ power into 18KHz power. The ultrasonic transducer can transform this high frequency power into mechanical vibration of the same frequency. The suitable fine powdery materials include those with a diameter of 0.063mm-0.02mm.
     This powder screening system, based on the traditional circular vibrating screen, comes with a low amplitude and high frequency ultrasonic vibration wave on the screen during the operation. Thus the fine powder can gain large ultrasonic acceleration, reducing its adhesion, friction, and wedging in the meshes. Then our ultrasonic vibrating screen can achieve high efficiency screening and screen cleaning.
Main Feature:
1. During the gravity setting, low density powder (<0.3 ton per cubic meter) can be prevented from slightly contacting with meshes to some degree, and the material mobility can also be reduced. Besides, the high density metal powder can be prevented from staying at or wedging into the meshes, and the material's adhesion to the mesh due to the static charge can be alleviated. Thus the screening performance and efficiency can be both improved.
2. The penetrating rate of the material is generally 50%-400% higher than that of vibrating screen without ultrasonic transducers.
3. The screen cleaning time for our ultrasonic vibrating screen is greatly reduced, and sometimes this procedure can be saved.
4. The accessories like the bouncing balls won't produce and contamination to the powdery material.
5. The mesh size and screening precision are stable.
6. Those materials adhering to the screen can be decomposed, reducing the materials left on the screen.
7. The screening times can be greatly reduced.
8. A self-protective motor is available for the ultrasonic vibrating screen. When there is a short circuit, phase loss, or unstable voltage, the motor will stop working automatically. Thus both the motor and the power supplier can be protected, making the operation much safer.
9. The motor has an IP rating of IP65. It is heat resistant, oil resistant, dustproof and waterproof.
Main Technical Parameters:
Size Code
Diameter (mm)
Mesh Area
per deck (m2)Number of
DecksPower
(KW)Maximum size to process(mm)
S494-B
430
0.13
1
0.25
20
S496-B
610
0.16
1
0.5
20
S498-B
760
0.44
1
0.75
30
S4910-B
910
0.63
1
0.8
30
S4912-B
1120
1.03
1
1.5
30
S4915-B
1460
1.65
1
2.2
50
S4918-B
1728
2.4
1
2.5
50
S4920-B
1910
2.98
1
2.5
60
Details:
Package&Service&Certificate
Packing:Outer packing is plywood case, which is up to the international standard. Inner packing is moisture-proof and water-proof membrane. All of packages are wrapped by 0.5mm steel belt to further strengthen, which can ensure machine safe during shipping.
Shipment: 3 working days after receiving your deposit.
Service:1. Special design offered. 2.Buyer label paste offered. 3.Sample testing support.                4.View our Factory  5.One year warranty. 6. Three years extended warranty.
       7. 24 hours inquiry and consulting support.  8. Training how to instal and use the machine.
Main Products
FAQ:
Required inquiry information
Please provide the follow information for a suitable machine:
1. Please advice your usage.Â
2. Please advice the capacity you need (kg/h).Â
3. Please advice how many layers you require and the mesh size.
4. What's the voltage you use?
5. Other special requirement.Â
We promise, all of your information (Tel, email, etc.) will be not published without permission.Â
Product Description
Â
Introduction:
    The ultrasonic sieving machine is a kind of high precision sieve filter machine, which uses both the vertical vibrating motor and ultrasonic transmitter as its vibrating source. By adding the ultrasonic wave to the screen, it can be widely used in any industries needing to sieve and filter high value-added micropowder.
Principle:
     The ultrasonic vibrating screen can convert 220V/50HZ and 110V/60HZ power into 18KHz power. The ultrasonic transducer can transform this high frequency power into mechanical vibration of the same frequency. The suitable fine powdery materials include those with a diameter of 0.063mm-0.02mm.
     This powder screening system, based on the traditional circular vibrating screen, comes with a low amplitude and high frequency ultrasonic vibration wave on the screen during the operation. Thus the fine powder can gain large ultrasonic acceleration, reducing its adhesion, friction, and wedging in the meshes. Then our ultrasonic vibrating screen can achieve high efficiency screening and screen cleaning.
Main Feature:
1. During the gravity setting, low density powder (<0.3 ton per cubic meter) can be prevented from slightly contacting with meshes to some degree, and the material mobility can also be reduced. Besides, the high density metal powder can be prevented from staying at or wedging into the meshes, and the material's adhesion to the mesh due to the static charge can be alleviated. Thus the screening performance and efficiency can be both improved.
2. The penetrating rate of the material is generally 50%-400% higher than that of vibrating screen without ultrasonic transducers.
3. The screen cleaning time for our ultrasonic vibrating screen is greatly reduced, and sometimes this procedure can be saved.
4. The accessories like the bouncing balls won't produce and contamination to the powdery material.
5. The mesh size and screening precision are stable.
6. Those materials adhering to the screen can be decomposed, reducing the materials left on the screen.
7. The screening times can be greatly reduced.
8. A self-protective motor is available for the ultrasonic vibrating screen. When there is a short circuit, phase loss, or unstable voltage, the motor will stop working automatically. Thus both the motor and the power supplier can be protected, making the operation much safer.
9. The motor has an IP rating of IP65. It is heat resistant, oil resistant, dustproof and waterproof.
Main Technical Parameters:
Size Code
Diameter (mm)
Mesh Area
per deck (m2)Number of
DecksPower
(KW)Maximum size to process(mm)
S494-B
430
0.13
1
0.25
20
S496-B
610
0.16
1
0.5
20
S498-B
760
0.44
1
0.75
30
S4910-B
910
0.63
1
0.8
30
S4912-B
1120
1.03
1
1.5
30
S4915-B
1460
1.65
1
2.2
50
S4918-B
1728
2.4
1
2.5
50
S4920-B
1910
2.98
1
2.5
60
Details:
Package&Service&Certificate
Packing:Outer packing is plywood case, which is up to the international standard. Inner packing is moisture-proof and water-proof membrane. All of packages are wrapped by 0.5mm steel belt to further strengthen, which can ensure machine safe during shipping.
Shipment: 3 working days after receiving your deposit.
Service:1. Special design offered. 2.Buyer label paste offered. 3.Sample testing support.                4.View our Factory  5.One year warranty. 6. Three years extended warranty.
       7. 24 hours inquiry and consulting support.  8. Training how to instal and use the machine.
Main Products
FAQ:
Required inquiry information
Please provide the follow information for a suitable machine:
1. Please advice your usage.Â
2. Please advice the capacity you need (kg/h).Â
3. Please advice how many layers you require and the mesh size.
4. What's the voltage you use?
5. Other special requirement.Â
We promise, all of your information (Tel, email, etc.) will be not published without permission.Â
Model NO.: S496-B
Shaft Number: Double
Running Track: Circular Vibrating Screen
Supporting Device: Coil Spring
Warranty: 1 Year
Customized: Customized
Condition: New
Commodity: Powder Ultrasonic Vibrating Sieve
Material: Contact Part Is Stainless Steel
Power: 0.25kw-2.5kw
Mesh Size: 2-600mesh
Mesh Type: Woven Wire or Punching Hole
Voltage: 110V-550V
Certificate: Ce, ISO, SGS
Layer: 1
Noise: 70dB
Phase: 3 or Single
Trademark: YongQing
Transport Package: Standard Export Plywood Case
Specification: 430mm-1910mm
Origin: Henan, China
HS Code: 847410000
Model NO.: S496-B
Shaft Number: Double
Running Track: Circular Vibrating Screen
Supporting Device: Coil Spring
Warranty: 1 Year
Customized: Customized
Condition: New
Commodity: Powder Ultrasonic Vibrating Sieve
Material: Contact Part Is Stainless Steel
Power: 0.25kw-2.5kw
Mesh Size: 2-600mesh
Mesh Type: Woven Wire or Punching Hole
Voltage: 110V-550V
Certificate: Ce, ISO, SGS
Layer: 1
Noise: 70dB
Phase: 3 or Single
Trademark: YongQing
Transport Package: Standard Export Plywood Case
Specification: 430mm-1910mm
Origin: Henan, China
HS Code: 847410000
Product DescriptionPotato corn extract powder ultrasonic vibrating sieve
Potato corn extract powder ultrasonic vibrating sieve