5. After the machine has been used, all we have to do is to clean the inside and outside of the putty powder mixer and clean around the mixer. However, before we clean up, what we need to do is cut off the operation after taking energy. Perlite expansion furnace | Gravity mixer | Dry powder mortar packaging machine | Automatic quantitative packaging machine | PuTTY powder equipment | PuTTY powder mixer | Insulation mortar equipment | Dry powder mixer | Dry mortar production line | Inorganic thermal insulation mortar production line.
Description:: Hydraulic Cylinder Machined Port, Head, Rod End, Cylinder Body, Clevis Hydraulic Valve Block,Casting Cylinder Body,Hydraulic Cylinder Component,Hydraulic Cylinder Casting Parts J.B MACHINERY (NINGBO) CO., LTD. , https://www.jbcastings.com
1. During the use of the putty powder mixer, be sure to remember to add water first and then add the material to the mixing operation. Moreover, in the process of feeding, it must not exceed the rated capacity of putty powder equipment, so it has a great impact on the performance of putty powder mixer.
2. In the process of using putty powder mixer, during the operation, it is forbidden to use manual or wooden stick to enter the operation of dipping material in the mixer barrel .
3, in the use of putty powder mixer when the process, its instrumentation, as well as the indication signal, must be accurate and reliable. Otherwise, there are great hidden dangers to the safety of operators .
4, in the use of putty powder mixer when the process, if there is any fault, it should first cut off the power after the inspection work.
Â
Material :: Steel bar / cast iron / Stainless steel casting / Forging
Standard :: ASTM, AISI, BS, JIS standard.
MFG process:: Casting / Forging + CNC Machining
Application:: Heavy Duty Hydraulic Cylinders
Key features:: Min.2800 kpa hydraulic pressure Yield strength (Min) :: 350mpa - 540 mpa
    Whether it is in the use of putty powder mixers, or in the use of other real stone paint equipment, if you do not pay attention during the operation, it will have a great impact on the efficiency of use. So, in the process of operation, we need to pay attention to those problems?