Model NO.: RB
Color: Blue
Trademark: RAINBOW
Specification: CE
Origin: China
Model NO.: RB
Color: Blue
Trademark: RAINBOW
Specification: CE
Origin: China
Double knife cutting machine
Cut a tube motor: 3HP (2.2KW); 440V; 4.35A; 60Hz; 1700 rev / min 2
2. Hydraulic motor: 3HP (2.2KW); 440V; 60Hz; 4.8A; 1735 rev / min
3. Adaptation blade: Φ300 × 2.0 × two
4. The pipe cutting cylinder bore is Φ63mm, the maximum stroke of 110mm
5. The clamp cylinder bore is Φ50mm, the maximum stroke of 100mm
6. Blade speed 94 revolutions per minute.
7. Maximum cutting diameter: pipe Φ70mm; square tube 60mm
8. Maximum cutting length: 2400mm (45-degree pipe when cut)
8. The hydraulic pressure adjustment 15-30KG / CM2
9. The pipe cutting head can about the yaw angle of 45 degrees
10. Machine size (length × width × height): 2800 × 940 × 745mm
11. The machine Maximum dimensions: 3200 (total length) × 1100 (total width) × 1930 (total height) mm
12. The hydraulic station hydraulic system that is an important source of power of the machine, jack up and down and left and right travel by hydraulic control and drive.


Semi Automaitc Double Knife Iron Cutting Machine

hydraulic pipe cutting machine

1. saw table infeed cylinder bore is Φ80mm, the maximum stroke of 400mm.
2. Saw the stage for the folder material cylinder bore Φ80mm, the maximum stroke of 25mm.
3. The material sandwiched around a cylinder bore Φ80mm, the maximum stroke of 25mm.
4. Feed length cylinder bore is Φ40mm, the maximum stroke of 700mm.
5. The saw blade speed (low speed of 60 rpm, speed 120 rpm) per minute.
6. The hardness and diameter size sawing speed to the reference tube, usually 20 seconds to a return trip.
7. The blade is equipped with a three-phase coolant pump: 12L / min; 380V; 50Hz; 40W; 0.25A
8. Saw Qiema Da Power: 2.4 / 3KW; 380V; 5.56 / 6.65A; 1400 / 2800r / min
9. The hydraulic motor power: 3KW; 380V; 6.8A; 50Hz; 1420r / min
10. Adaptation blade: Φ360 × 2.0
11. The maximum system pressure: 21MPa
12. Flow: 14L / min
13. Pump: PVF1-14-F-R
14. Control Power: AC 380V motor
AC 220V solenoid valves, contactors, relays
15. The hydraulic oil Model: 68 # anti-wear hydraulic oil
16. Machine Maximum dimensions: 2800 (total length) × 1280 (total width) × 1970 (total height) mm
17. The apparatus of voltage: AC 380V
18. Solenoid valve: DSG-01-3C2-D24-N1-50WG (two)
DSG-01-3C4-D24-N1-5G
DSG-01-3C4-D24-N1-50
S-BSG-03-2B3B-D24-N1-51WG
Semi Automaitc Double Knife Iron Cutting Machine







XM-B38NC hydraulic pipe bending machine
First, the main technical parameters:
1, the maximum bending capacity: Φ 38 * 2.0 (carbon steel, for example)
2, the bending radius: Only one kind of bend radius. Bending radius: R35 ~ R350
3, the bending angle: 0-1900
4, through the core effective length: 2350mm
5, the control power supply: AC220V (AC contactor) DC24V (solenoid valve \ proximity switch)
6, the bending speed: Max 440 / s
7, clamping stroke: 51mm
8, given the tight itinerary: 51mm
9, motor power: 5HP
10, pump displacement: 17L / min (NB2-D20F)
11, maximum system pressure: 12MPa
12. Fuel tank capacity: 190L (using 68 hydraulic oils)
13, the machine appearance: 2400 * 700 * 1000
14. Weight: 900KG.
15, the angle setting: 16 kinds.
Semi Automaitc Double Knife Iron Cutting Machine


AUTOMATIC COMPUTER WIRE FORMING MACHINE
This machine can be used to produce every kinds of straight spring, tower spring, pullback spring, double twist spring, tension spring, rectangle spring, clockwork spring, fancy spring, deformed spring, and various kinds of wire forming etc.


I Advantages
  1. Use Taiwan imported computer control system and import servo motors;
  2. English interface, simple operate, accurate positioning, computer can control 3 to 8 servo motor, all motor can run synchronous or alone;
  3. Set with a precision testing tracking system, will stop automatically if there is any unqualified products;
  4. According to the working condition on the screen, can modify products' outer diameter or angle etc at any time;
  5. Mechanical design of automatic lubricating oil supply, ensure the equipment running for a long time;
  6. Has the design with automatic stop when wireless, disconnection, tangled lines, also has the function of line automatic acceleration, make the production easier and effective.
II Main technical data:
  Item 845
1 Wire size Φ1.0- Φ4.5mm(IronΦ1.0- 6.0mm)
2 Feeding length MaxΦ80mm
3 Outside diameter ±0.01~±9999.99
4 Wire feed speed 0-60m/min
5 Cam setting value ±0.10º~±359.90º
6 Cam rotation speed 1~60RPM
7 Motor wire feed 5.5kw
8 Motor cam 5.5kw
9 Motor axis 1.5kw
10 Power AC 380V±10%V50HZ
11 Dimensions 1320x730x1720mm
12 Weight 2200KG


For anything of the machine, please feel free to contact me.
86 15204631239
Crystal Double knife cutting machine
Cut a tube motor: 3HP (2.2KW); 440V; 4.35A; 60Hz; 1700 rev / min 2
2. Hydraulic motor: 3HP (2.2KW); 440V; 60Hz; 4.8A; 1735 rev / min
3. Adaptation blade: Φ300 × 2.0 × two
4. The pipe cutting cylinder bore is Φ63mm, the maximum stroke of 110mm
5. The clamp cylinder bore is Φ50mm, the maximum stroke of 100mm
6. Blade speed 94 revolutions per minute.
7. Maximum cutting diameter: pipe Φ70mm; square tube 60mm
8. Maximum cutting length: 2400mm (45-degree pipe when cut)
8. The hydraulic pressure adjustment 15-30KG / CM2
9. The pipe cutting head can about the yaw angle of 45 degrees
10. Machine size (length × width × height): 2800 × 940 × 745mm
11. The machine Maximum dimensions: 3200 (total length) × 1100 (total width) × 1930 (total height) mm
12. The hydraulic station hydraulic system that is an important source of power of the machine, jack up and down and left and right travel by hydraulic control and drive.


Semi Automaitc Double Knife Iron Cutting Machine

hydraulic pipe cutting machine

1. saw table infeed cylinder bore is Φ80mm, the maximum stroke of 400mm.
2. Saw the stage for the folder material cylinder bore Φ80mm, the maximum stroke of 25mm.
3. The material sandwiched around a cylinder bore Φ80mm, the maximum stroke of 25mm.
4. Feed length cylinder bore is Φ40mm, the maximum stroke of 700mm.
5. The saw blade speed (low speed of 60 rpm, speed 120 rpm) per minute.
6. The hardness and diameter size sawing speed to the reference tube, usually 20 seconds to a return trip.
7. The blade is equipped with a three-phase coolant pump: 12L / min; 380V; 50Hz; 40W; 0.25A
8. Saw Qiema Da Power: 2.4 / 3KW; 380V; 5.56 / 6.65A; 1400 / 2800r / min
9. The hydraulic motor power: 3KW; 380V; 6.8A; 50Hz; 1420r / min
10. Adaptation blade: Φ360 × 2.0
11. The maximum system pressure: 21MPa
12. Flow: 14L / min
13. Pump: PVF1-14-F-R
14. Control Power: AC 380V motor
AC 220V solenoid valves, contactors, relays
15. The hydraulic oil Model: 68 # anti-wear hydraulic oil
16. Machine Maximum dimensions: 2800 (total length) × 1280 (total width) × 1970 (total height) mm
17. The apparatus of voltage: AC 380V
18. Solenoid valve: DSG-01-3C2-D24-N1-50WG (two)
DSG-01-3C4-D24-N1-5G
DSG-01-3C4-D24-N1-50
S-BSG-03-2B3B-D24-N1-51WG
Semi Automaitc Double Knife Iron Cutting Machine







XM-B38NC hydraulic pipe bending machine
First, the main technical parameters:
1, the maximum bending capacity: Φ 38 * 2.0 (carbon steel, for example)
2, the bending radius: Only one kind of bend radius. Bending radius: R35 ~ R350
3, the bending angle: 0-1900
4, through the core effective length: 2350mm
5, the control power supply: AC220V (AC contactor) DC24V (solenoid valve \ proximity switch)
6, the bending speed: Max 440 / s
7, clamping stroke: 51mm
8, given the tight itinerary: 51mm
9, motor power: 5HP
10, pump displacement: 17L / min (NB2-D20F)
11, maximum system pressure: 12MPa
12. Fuel tank capacity: 190L (using 68 hydraulic oils)
13, the machine appearance: 2400 * 700 * 1000
14. Weight: 900KG.
15, the angle setting: 16 kinds.
Semi Automaitc Double Knife Iron Cutting Machine


AUTOMATIC COMPUTER WIRE FORMING MACHINE
This machine can be used to produce every kinds of straight spring, tower spring, pullback spring, double twist spring, tension spring, rectangle spring, clockwork spring, fancy spring, deformed spring, and various kinds of wire forming etc.


I Advantages
  1. Use Taiwan imported computer control system and import servo motors;
  2. English interface, simple operate, accurate positioning, computer can control 3 to 8 servo motor, all motor can run synchronous or alone;
  3. Set with a precision testing tracking system, will stop automatically if there is any unqualified products;
  4. According to the working condition on the screen, can modify products' outer diameter or angle etc at any time;
  5. Mechanical design of automatic lubricating oil supply, ensure the equipment running for a long time;
  6. Has the design with automatic stop when wireless, disconnection, tangled lines, also has the function of line automatic acceleration, make the production easier and effective.
II Main technical data:
  Item 845
1 Wire size Φ1.0- Φ4.5mm(IronΦ1.0- 6.0mm)
2 Feeding length MaxΦ80mm
3 Outside diameter ±0.01~±9999.99
4 Wire feed speed 0-60m/min
5 Cam setting value ±0.10º~±359.90º
6 Cam rotation speed 1~60RPM
7 Motor wire feed 5.5kw
8 Motor cam 5.5kw
9 Motor axis 1.5kw
10 Power AC 380V±10%V50HZ
11 Dimensions 1320x730x1720mm
12 Weight 2200KG


For anything of the machine, please feel free to contact me.
86 15204631239
Crystal

Carbide Nozzles

Langsun Carbide understands the critical role that precise and reliable nozzles play in oil and gas operations. Our tungsten carbide nozzles are engineered to withstand the harsh conditions encountered during drilling, production and refining.

The oil and gas industry requires high-quality nozzles that can withstand extreme temperatures, harsh chemicals, and high pressures.Langsun Carbide's commitment to excellence and precision ensures that our tungsten carbide nozzles meet the stringent requirements of the oil and gas industry. Our nozzles are engineered to provide superior spray patterns, enhanced flow control and minimal clogging, enabling you to achieve precise fluid dispersion and maximize production.

Experience the reliability and performance of our tungsten carbide nozzles designed specifically for the oil and gas industry and benefit from our expertise in supplying high quality carbide nozzles to the oil and gas industry. Contact us now to discuss your requirements and a dedicated technical team will provide cutting-edge solutions to meet your specific operational needs.







Carbide Nozzles,Tungsten Carbide Nozzle,Cemented Carbide Nozzle,Tungsten Carbide Nozzles

NINGBO LANGSUN TUNGSTEN CARBIDE CO.,LTD. , https://www.lsccarbide.com

Posted on