Why stand over a pan of solvent and breathe fumes while you scrub? Let our machines do the work for you - and get every nook and cranny scrubbed clean.
These ultrasonic systems are designed for the serious professional who needs to degrease metal parts quickly and effectively. We offer two configurations, and will be happy to put together a specially sized system with accessories to suit your needs. Ultrasonic cleaning is perfect for carburators, engine and other intricate metal parts, because it can reach into the tiniest openings and blind
oil and fuel cleaner machine with filteration system 
Ultrasonic cleaning is primarily an aqueous tank system that uses ultrasonic energy to remove dirt, grease, oil, And baked-on carbon from parts. Contaminants such as paint, rust, glued-on gaskets, and heavy layers of bakedonCarbon can also be removed by ultrasonic cleaning but require more aggressive chemistries. Unlike someOther cleaning processes, ultrasonic cleaning will not damage intricate, lightweight, or easily damaged parts. Parts that have a tendency to tightly nest will shadow each other, reducing cleaning efficiency.
How it Works
Ultrasonic cleaning works by producing sound waves in liquids. The waves consist of both high- and low-pressureFronts. The low-pressure fronts are small enough to cause bubbles to form. The high-pressure fronts cause the bubblesTo collapse. The expanding and collapsing bubbles loosen contaminants on the part surface and the chemical cleanersEither dissolve or segregate the free contaminants.
As with sound waves in air, ultrasonic sound waves can be varied by both frequency (pitch) and amplitude (power). Higher frequencies will produce smaller bubbles and lower frequencies will produce larger bubbles. Larger bubblesWill typically dislodge large particles and smaller bubbles small particles. Typical industrial systems are either 28kHz or 40 kHz, which can handle the particle sizes in the range of normal automotive cleaning. Ultrasonic cleaningSystems with a much higher frequency are used in the computer industry where tiny particles need to be removed.
Configuration of Equipment
The most basic piece of equipment for ultrasonic cleaning is a stainless steel tank with an ultrasonicTransducer and power supply (frequency generator), and is usually referred to as a benchtop unit. MoreAdvanced units may include features such as heating, filtration, mechanical agitation, rotating baskets, Ultrasonic power controls, oil skimmers, water level controls, and frequency modulators to improveSolution degassing.
oil and fuel cleaner machine machine detail 
oil and fuel ultrasonic cleaner cleaning effect :
No More Solvents!
A carburetor remanufacturer formerly used manual solvents parts washers to clean Carburetors. This was a very labor-intensive operation, requiring a technician to spend between 15-20 minutes per carburetor. In many cases, the carburetor then required additional cleaning in a DIP tank containing caustic soda, followed by a hot water rinse.
Application:
They deep clean to remove dirt, grease, waxes, and oils used from Switches, Gears, Nozzles, Relays and motors, Bearings, Sieves, Metal, Ironware, plastic parts and assemblies.
They will be good servers for yours and make the procedure more smoothly!
Remark:
1. Tank size and other functions can be custom made
2. Customer logo is acceptable
3. Packing by wooden case
4. Lead time is negotiable according to qty. And custom made requirements
Model:Â Skymenâ„¢
JTS-1012
JTS-1018
JTS-1024
JTS-1030
JTS-1036
JTS-1072
TANK'SÂ WORKINGÂ DIMENSION
 (mm)L1
355
406
500
500
500
720
Â
W1
305
305
355
406
460
680
H1
355
460
500
500
550
620
OVERALLÂ DIMENSIONÂ (mm)
L2
535
586
680
710
710
940
W2
485
485
535
586
640
860
H2
750
680
720
720
770
850
TANK'SÂ TOTALÂ CAPACITY
38L
56L
88L
101L
126L
303L
TANK'SÂ MATERIAL
SUS304/SUS316L
IN-TANKÂ SURFACEÂ FINISHING
Hard-Cr Plating Treatment (20+ microns)
HOUSING'SÂ MATERIAL
SUS304/SUS316L
ULTRASONICÂ FREQUENCY*
28kHz / 40kHz
ULTRASONICÂ TRANSDUCER
12
18
24
30
36
72
ULTRASONICÂ OUTPUTÂ POWERÂ (MAX.)
600W
900W
1200W
1500W
1800W
3600W
ELECTRONICÂ GENERATOR
KG600
KG900
KG1200
KG1500
KG1800
KG3600
Build-in
Separate
HEATER'SÂ (HOTÂ PLATE)Â POWER
1.5kW
3kW
4.5kW
9KW
CLEANINGÂ Machine
POWERÂ REQUIREMENTACÂ 220VÂ /Â 240V
AC 380V, 3 phase
AC 415V, 3 phase
GENERATOR'SÂ POWERÂ REQUIREMENT
----
AC 220V / 240V, 1, 13AMP
NEWÂ PRODUCTÂ
68kHz / 80kHz / 120kHz are also available
 for  fuel injector filter  Ultrasonic oil filter cleaner, ultrasonic machines for car parts, carburator, engine
Why stand over a pan of solvent and breathe fumes while you scrub? Let our machines do the work for you - and get every nook and cranny scrubbed clean.
These ultrasonic systems are designed for the serious professional who needs to degrease metal parts quickly and effectively. We offer two configurations, and will be happy to put together a specially sized system with accessories to suit your needs. Ultrasonic cleaning is perfect for carburators, engine and other intricate metal parts, because it can reach into the tiniest openings and blind
oil and fuel cleaner machine with filteration systemÂ
Ultrasonic cleaning is primarily an aqueous tank system that uses ultrasonic energy to remove dirt, grease, oil, And baked-on carbon from parts. Contaminants such as paint, rust, glued-on gaskets, and heavy layers of bakedonCarbon can also be removed by ultrasonic cleaning but require more aggressive chemistries. Unlike someOther cleaning processes, ultrasonic cleaning will not damage intricate, lightweight, or easily damaged parts. Parts that have a tendency to tightly nest will shadow each other, reducing cleaning efficiency.
How it Works
Ultrasonic cleaning works by producing sound waves in liquids. The waves consist of both high- and low-pressureFronts. The low-pressure fronts are small enough to cause bubbles to form. The high-pressure fronts cause the bubblesTo collapse. The expanding and collapsing bubbles loosen contaminants on the part surface and the chemical cleanersEither dissolve or segregate the free contaminants.
As with sound waves in air, ultrasonic sound waves can be varied by both frequency (pitch) and amplitude (power). Higher frequencies will produce smaller bubbles and lower frequencies will produce larger bubbles. Larger bubblesWill typically dislodge large particles and smaller bubbles small particles. Typical industrial systems are either 28kHz or 40 kHz, which can handle the particle sizes in the range of normal automotive cleaning. Ultrasonic cleaningSystems with a much higher frequency are used in the computer industry where tiny particles need to be removed.
Configuration of Equipment
The most basic piece of equipment for ultrasonic cleaning is a stainless steel tank with an ultrasonicTransducer and power supply (frequency generator), and is usually referred to as a benchtop unit. MoreAdvanced units may include features such as heating, filtration, mechanical agitation, rotating baskets, Ultrasonic power controls, oil skimmers, water level controls, and frequency modulators to improveSolution degassing.
oil and fuel cleaner machine machine detailÂ
oil and fuel ultrasonic cleaner cleaning effect :
No More Solvents!
A carburetor remanufacturer formerly used manual solvents parts washers to clean Carburetors. This was a very labor-intensive operation, requiring a technician to spend between 15-20 minutes per carburetor. In many cases, the carburetor then required additional cleaning in a DIP tank containing caustic soda, followed by a hot water rinse.
Application:
They deep clean to remove dirt, grease, waxes, and oils used from Switches, Gears, Nozzles, Relays and motors, Bearings, Sieves, Metal, Ironware, plastic parts and assemblies.
They will be good servers for yours and make the procedure more smoothly!
Remark:
1. Tank size and other functions can be custom made
2. Customer logo is acceptable
3. Packing by wooden case
4. Lead time is negotiable according to qty. And custom made requirements
Model:Â Skymenâ„¢
JTS-1012
JTS-1018
JTS-1024
JTS-1030
JTS-1036
JTS-1072
TANK'SÂ WORKINGÂ DIMENSION
 (mm)L1
355
406
500
500
500
720
Â
W1
305
305
355
406
460
680
H1
355
460
500
500
550
620
OVERALLÂ DIMENSIONÂ (mm)
L2
535
586
680
710
710
940
W2
485
485
535
586
640
860
H2
750
680
720
720
770
850
TANK'SÂ TOTALÂ CAPACITY
38L
56L
88L
101L
126L
303L
TANK'SÂ MATERIAL
SUS304/SUS316L
IN-TANKÂ SURFACEÂ FINISHING
Hard-Cr Plating Treatment (20+ microns)
HOUSING'SÂ MATERIAL
SUS304/SUS316L
ULTRASONICÂ FREQUENCY*
28kHz / 40kHz
ULTRASONICÂ TRANSDUCER
12
18
24
30
36
72
ULTRASONICÂ OUTPUTÂ POWERÂ (MAX.)
600W
900W
1200W
1500W
1800W
3600W
ELECTRONICÂ GENERATOR
KG600
KG900
KG1200
KG1500
KG1800
KG3600
Build-in
Separate
HEATER'SÂ (HOTÂ PLATE)Â POWER
1.5kW
3kW
4.5kW
9KW
CLEANINGÂ Machine
POWERÂ REQUIREMENTACÂ 220VÂ /Â 240V
AC 380V, 3 phase
AC 415V, 3 phase
GENERATOR'SÂ POWERÂ REQUIREMENT
----
AC 220V / 240V, 1, 13AMP
NEWÂ PRODUCTÂ
68kHz / 80kHz / 120kHz are also available
Model NO.: JTS-1072
Certification: CE
Customized: Customized
Feature: High Efficiency
Material: Stainless Steel SUS304/SUS316
Size: Custom Made Available
Mobility: Four Wheels to Move Easily
Solvent: SUS316 for Strong Acid and Alkaline
Basket: Layered Design for Different Demand
Sovent Recycle: Filter System to Remove Oil and Dirty
Ultrasonic Power: 3000W, Can Be Custom Made
Heating Power: 4.5kw, Can Be Custom Made
Frequency: 28kHz/40kHz/60kHz/80kHz/120kHz
Trademark: skymen/OEM/ODM
Specification: CE, ROHS
Origin: Guangdong, China
HS Code: 845620
Model NO.: JTS-1072
Certification: CE
Customized: Customized
Feature: High Efficiency
Material: Stainless Steel SUS304/SUS316
Size: Custom Made Available
Mobility: Four Wheels to Move Easily
Solvent: SUS316 for Strong Acid and Alkaline
Basket: Layered Design for Different Demand
Sovent Recycle: Filter System to Remove Oil and Dirty
Ultrasonic Power: 3000W, Can Be Custom Made
Heating Power: 4.5kw, Can Be Custom Made
Frequency: 28kHz/40kHz/60kHz/80kHz/120kHz
Trademark: skymen/OEM/ODM
Specification: CE, ROHS
Origin: Guangdong, China
HS Code: 845620
 for  fuel injector filter  Ultrasonic oil filter cleaner, ultrasonic machines for car parts, carburator, engine