Sticker Paper Target,Officeworks Paper Sticker,Printed Product Sticker,Custom Sticker Printing Shenyang Meitu Artical Printing Co.,Ltd , https://www.meituprinting.com
Note: W unit is joule (usually the unit is kWh, common name, converted after calculation, 1 kWh = 1 degree = 3.6 times 10 times 6th joule)
Hikvision monitoring engineering maintenance! Technical knowledge points carefully organized by weak electricity engineers!
1. What is the POE supply voltage of Haikang equipment?
A: POE, 802.3af power supply protocol: power supply voltage: 44-57V supply current: 10-350mA
POE, 802.3at power supply protocol: power supply voltage: 50-57V, supply current: 10-600mA
At present, Haikang has a POE port recorder. The external power supply voltage of the POE port is 48V, and the single port power is 30W. Which protocol is supported by the POE camera? You can enter the product model in the Haikang Product Center and check it in the detailed parameters.
2. How to set the IP address of the Haikang device to the external network?
A: As long as the IP address of the device is in the same network segment as the IP address of the connected router.
3. How to get the IP address of the computer, how to ping the IP of the device, how to ping the command, how to ping the big package, how to test whether the port is connected?
A: On the computer keyboard, press win+r to pop up the running prompt box, enter cmd, click OK, a black window pops up, the following commands are all based on this:
Ipconfig: View the computer IP address, enter the command "ipconfig" and press the "enter" button on the keyboard to get the ip address, subnet mask, gateway and other information of the machine. The gateway is the Lan port IP address of the router. How, very simple, learn a command "ipconfig", no longer afraid to find a computer ip, router ip.
Ping: Test the network status, whether it is connected, whether there is a packet loss. Enter the command format "ping + space + device ip" and hit the Enter key. The computer will send out 4 communications to know the network connection status of the device. For example: ping 192.168.0.2 is the same, and ping is not in the same network segment 10.3.16.1 is different
4. How is the power consumption of the equipment counted?
A: First, confirm the power parameters of the device, and then multiply by the corresponding working time to calculate the power consumption of the camera. W=Pt, taking the camera DS-2CD3T45 as an example, the maximum power is 7W, working for 1 hour (equal to 3600 seconds), the power consumption is: W=Pt=7*1*3600=25200 joules, 25200/(3.6* 106) = 0.007 kWh. It can be seen that the power consumption per hour is about 0.007 kWh.
5. Does Haikang equipment support the onvif protocol?
A: Haikang's network cameras and video recorders support the standard onvif protocol. The corresponding onvif port number is 80. If the http port of the camera is changed, the port of onvif also changes accordingly. This onvif port defines the value of the http port. The username defaults to admin, the password is the activation password set at the time of activation, and the fluorite camera supports fluorite's proprietary protocol and does not support onvif.
6. What should I do if I cannot access the device in the LAN?
A: LAN access:
1) If there is no router: the Ip address cannot be obtained automatically, so you need to manually set the Ip address of the device, and the device needs to be on the same network segment as the computer ip.
2) If there is a router: the IP address of all devices under the router needs to be on the same network segment as the router IP. Whether the IP address can be obtained depends on whether the router has DHCP enabled.
3) If you are still unable to access, it is recommended to confirm and provide your equipment model to Haikang population consultation.
7, Haikang equipment password will be locked several times wrong?
A: The password will be locked if you enter the wrong 5 times. Unlocking method: You can restart the device breakpoint.
8, the video recorder prompts the IP address does not match, how to solve?
A: The prompt "IP address does not match" is because IP address binding is done in the user management of the computer client. If you want to solve: you need to know which client software is doing, undo the binding. If you can't find the client IP that is bound to the device, you can only solve the problem by restoring the device to factory settings.
The recorder is restored to the factory: Main Menu - System Maintenance - Default Configuration - Click OK. The video in the hard disk will not be lost. The parameters of the recorder other than the network parameters need to be reconfigured. The camera is restored to the factory: Enter the IP address of the device in the computer browser of the same LAN, and enter the user name and password to log in. In the advanced configuration - the system has a factory reset, choose simple recovery.
9. What is the default IP of the recorder and camera?
A: The initial IP address of the old version of Haikang is 192.0.0.64, and the initial IP address of the new version is 192.168.1.64.
The current IP address of the recorder can be viewed in the main menu - System Configuration - Network Configuration - Basic Configuration - IPV4 interface. If there is no display, you can download and install the SADP software on the computer in the same LAN to search.
The current IP address of the camera. If the camera is connected to a VCR, you can view it on the VCR-Main Menu-Channel Management-IP channel interface. If it is not found on the VCR, it is recommended to install the SADP software on the computer in the same LAN to search for the current IP address of the device. .