The learning of the new car running-in period

Generally speaking, it is 1500-2000 km. The specific models are slightly different. We should strictly follow the calibration maintenance mileage of the on-board maintenance manual or the manual.

First, the need to control the speed during the running-in period

During the running-in period and the speed of the engine to control the initial 500 km of normal driving, the speed should not exceed 5000 rpm, do not exceed 501500 km, the speed should not exceed 6000 rpm, the speed should not exceed 8000 rpm before the speed should not exceed 8000 rpm. The speed should not exceed 80 during the running-in period, the engine speed should be changed frequently, the gears should be run-in, and the throttle should not be fixed at a certain speed. The purpose of this is to make the components work evenly, but not more than The maximum speed specified here should be emphasized here. The above data has not been scientifically justified. The landlord does not have such a professional level to demonstrate. These are based on years of experience and the practice of the old birds for many years. Each time you change the oil, you can pull the high speed in each gear position. The time should not be too long. It is enough for ten seconds. The purpose is to eliminate the running iron scrap when the carbon deposit and oil release are eliminated!

2. About the engine of the hot car during the running-in period

Whether in the hot state or the cold state, after the ignition, the engine should have sufficient idle time to preheat, at least one minute to two minutes, in order to better flow the oil to all lubrication parts. .

Third, change the engine oil

There are many kinds of arguments on this topic. Some old birds have a view of 300 500 1000 1500 2000. It is necessary to change a lot of oil during the running-in period. This method is more secure. At most, it is more to spend more oil. At the very least, it will not damage your car. . However, some vehicle maintenance manuals write that the first oil change is 500 kilometers, the second oil change is 1000 kilometers, and the oil is changed every 2000 or 3000 kilometers later! At this point, I personally prefer the first statement, but I can make a change. Change to 300 800 1300 2000 After the running-in period, you can change the oil in four times. You can choose to use the fully synthetic motor oil during the running-in period. Why? As the name suggests, it is to be run-in. If you use fully synthetic motor oil, because of its excellent anti-wear properties, it will cause a more embarrassing situation, that is, the number of kilometers is enough, but the engine does not wear out! Use ordinary mineral oil! After the break-in period, the vehicle with high compression ratio can choose full synthetic motor oil. Here is a small tip. You can buy one bottle of the worst oil before changing the full synthetic oil. After draining the old oil, put the bottle into the machine. 2 to 3 minutes, then let go, then add fully synthetic motor oil!

Fourth, the change of the engine during the primary running-in period

Everyone should know that the motorcycle running-in period is 1,500 kilometers. There are many ways to change the oil in this 1500km. I suggest that you change the oil by 300km, 600km, 1000km and 1500km. Because the gears of the new car engine, the ejector pin or the chain work will produce waste, it is necessary to change the waste oil in time to drain the waste. And don't think about changing the oil for a few hundred kilometers and adding that cheap oil. This idea is not correct. No matter how many kilometers the car runs, as long as the engine is running, it is hot, it is on the oil. There is a lot of reliance, so when choosing oil, try to use the special engine oil that is sold with the engine at the place where the car is sold.

Five, the choice of gasoline label

This mainly depends on the compression ratio of the engine, and the instructions. Under normal circumstances, it is to look at the compression ratio of the engine. The compression ratio is 90 below 9:1 (but there are not 90 in many places now). 93 above 9:1 can be used for conditions above 10:1. Some cars have a compression ratio of even 12:1 or even higher.

Sixth, the primary running-in period driving motorcycle

Motorcycle driving during the running-in period is the biggest headache for novices. In fact, it is not necessary to be so demanding. After all, it is a mechanical thing, not so delicate. As long as you don't want to let the car out too much force, the speed of each gear should not exceed the limit of this gear. Motorcycles should try not to bring people and climb too steep slopes within 600 kilometers. Don't let the car eat vigorously. When you refuel, add 10 yuan for each time to reduce the weight of the car.

The speed of the first 600 km is 10 km in the first gear, 20 km in the second gear, 30 km in the third gear, 35 km in the fourth gear and 40 km in the fifth gear. It is necessary to shift gears repeatedly from one gear to five gears. Cut back one file from the fifth gear. From 600 kilometers to 1000 kilometers, you can add weight to the car. It is better to say that you are not too fat, but try not to take people to climb steep slopes. The gear speed is maintained at 12 km in the first gear, 22 km in the second gear, 32 km in the third gear, 37 km in the fourth gear, and 45 km in the fifth gear. It is still necessary to shift gears repeatedly. After changing the new engine oil for 1000 kilometers, find a place with a good road and a small number of people. Use a five-speed pull-up high speed (do not exceed 70KG below 150cc, and do not exceed 80KG above 150cc). The guarantee time is about 30 seconds. Then still have to return to normal running-in state. The gear speed is maintained at 15 km in the first gear, 25 km in the second gear, 35 km on the third floor, 40 km in the fourth gear and 50 km in the fifth gear. Pull back a high speed at 1200 kilometers. At 1500 km, ride to the after-sales, clean the air filter (if it is a paper filter, you can only change it) and the oil filter, drain the oil and clean the engine (after cleaning the engine, be sure to dry the cleaning liquid in the engine) Add new oil).

Seven, maintenance knowledge

1. Ordinary motorcycles are recommended to change oil from 2000 to 3000 km. For details, please refer to the vehicle maintenance manual.
2. Clean the air filter frequently, and replace the paper filter and oil filter in the number of kilometers in the maintenance manual;
3. Always check the screw fastening of each component;
4. Each time you start, press the start button for no more than 5 seconds, and the interval between fires should not be shorter than seven seconds!
5. Tire pressure, timely supplement according to the maintenance manual!
6. Taboo frequent start of the vehicle, and the driving distance is too short!
7. Check that the chain is tight!
8. Pay attention to rust prevention and wipe the vehicle in time!

Square Bottom Air Sickness Bag

1.Material:This type of paper bag is made out of 100% natural virgin wood pulp or recycled paper,which has no pungent odor. The raw materials which are selected carefully and imported from USA will be dealt with special process.The imported original wood pulp with 450 ° c high temperature sterilization is not easy to break and tear up.All the paper we used to manufacture the paper bag is not only super durable and reinforcement but also ECO friendly ,biodegradable,compostable environmental-friendly,natural friendly and PLA recyclable Owing to this good quality materials.We have very high standards on controlling raw materials.So that the supporting weight of our paper bag holds up to higher than those at the market. Reuse the paper bags as many times as you like and recycle them when you are done for a greener Earth! We offer a wide variety of material and color option to meet your requirements.

2.Size:Multi customized sizes are available,we accept personalized sizes.Different sizes including small,medium and large measurement which are suitable for different usages.It`s versatile.we category for kinds of industrial usage.

3.Bottom:Reinforcement flat ,square rectangle,block or sharp, pointed or pintched closure bottom is neat and flat without glue outside.We deal with the bottom carefully in order not to break easily.You don't need to worry about stuff fall down from the paper bag and make a trouble mess.A good quality bottom will be more useful and helpful which is also made by fully automatic machines.It is not only solid but also strong enough to support heavy duty weight.It can take whatever the light or heavy stuff inside the paper bag.They are not only durable and convenient but also environmental friendly compostable and recyclable.

4.Handles:without hanles.

5.Printing:We have the best advanced technology fully automatic printing machines which can support up to 8 colours printing.We accept customer designs and logos.Gravure printing,embossing printing,debossing printing,hot stamping,screen printing,UV printing,offset printing,flexo printing with CMYK pantone non-toxic water based ink are all available. Our printing has a pretty good quality as the printing of the designs is not only more durable,sun proof,weather proof but also beautiful and bright,which absorbs ink well and is stable not easy to tide the color.We aslo supply plainpaper bag, which are perfect for craft and DIY. Printed and embellished as you may wish. Personalize the bags to make them uniquely yours. Print your own business logo and use them as retail carry bags.

6.Surface handling:we supply glossy and matte surface dealing.This all depends on customer`s requirements.Whatever the glossy or matte surface makes the bag more luxurous.

7.Appication: SOS paper bags, bakery paper bags ,food packing paper bags,tin tie and zipper top lock stand up paper bags are perfect for packing vegetables,fruits,goodies ,bread, hamburgers,hot dogs,fast food,sausage,wine,cookies,grains,cereals,party favor , Christmas gifts . They are great suitable for any occations and affordable for small to medium businesses, parties & events, wedding reception and start-up business. Airline vomit,puke,baff,throw up,emesis paper bags,garbage,rubbish,trash, waste cleaning paper bags are perfect applicated in airplane,train,car,ship,pregnant,sports,morning exercises sickness,hangover,kid`s poops urain,garbage,trash,waste,rubbish cleaning,etc.

8.Quatity inspection systerm : One of the reasons for our good Quality is that inspection system is best of its kind. We're proud of our quality control system. Our standards are very high. we put great stress on quality of products.Almost every process is computerized.. All products have to pass strict inspection before they go out. I believe the quality is soul of an enterprise. So we won't sacrifice the quality for quick profit.All of our products are suitable for the world market. Our products has always come up to international standards. We have trained analysts to do quality analysis of each process when we make the product.We also provide quality analysis training as part of training for new workers plus a week of futher training every year. So our products are well known for their fine quality. All the paper bag are received a warm welcome in the world market wherever they go.Our clients are all satisfied with them.

9.Sample:We offer free samples between three and five days, but excluding complicate condition upon customer`s requirnments.For instance, we charge you like 50 dollars for samples,but we will refund you after placing an order.The expenses of samples delivery can be nagotiated.

10.Our factory: Jinan Xin Shun Yuan Packing Co., Ltd is located in Ningjiabu Industrial Park,Zhangqiu district, Jinan city, Shandong province, China.It originated in Shandong Printing Factory (founded in 1994).It is professional manufacture of new environmental-friendly packing bag based printing processing enterprise with more than 12 years of experience in production and management.Recent years, our scale is expanding. Covering an area of about 2 million square meters. And also expand our equipment, like unit type flexo printing machines, satellite adagio printing machines, lamination type flexo printing machines, gravureprinting , dry laminating machines, automatic square bottom paper bag machines, food paper bag machines, automatic control stick bag machines, trilateral, edges the closure, self-reliance paper bag machines, CNC cutting machines.We have 8 sets flexo printing machines, 1 set Gravure printing machine;12 sets Paper bag machines ; 5 sets cutting machines, tin tie machines;30 sets heat sealing machines ; 3 sets glue coating machines , etc. We have150 staff menbers,18 management staff ,12 salesmen and 120 workers. We have ISO9001, FSC certificates.

11.Packing & Shipment:Standard export packing, 250PCS or 500PCS each carton. We try our best to make sure the packing is seaworth and strong enough to stand the rough handling in a long distance shipment .In order to ensure the packing is moisture resistance,water proof,weather proof etc.The packing corrugated cartons therefore are lined with plastic bag from inside and strengthened double solid plastic straps.We have rich experience on packing.We normally do not only provide air transportment and sea transportment but also multi modal combined transportments,which is up to customer`s requirements.

12.Payment methord: L/C,D/A,D/P,T/T,Western Union,MoneyGram Paypal payments.

13.Our service:we are in 24/7 service,we are responsibilable for replacing the defect products.Feel free to talk to us.

Custom Clear Bags,Airline Clear Bag,Biodegrade Sickness Bag,Custom Logo Aviation Sickness Bag

JINAN XINSHUNYUAN PACKING CO., LTD , https://www.xsy-packaging.com