(1) Pump and pump house According to the regulations, the pump house is generally arranged near the bottom of the auxiliary shaft and connected to the central substation. The explosion-proof door is divided in the middle, which requires good ventilation and is convenient for equipment transportation. The main pump house is provided with at least two outlets, one of which is connected to the wellbore through the inclined lane, which is called the safety exit. It should be higher than the pumping unit floor level by more than 7m; the other outlet is the bottom of the pumping yard, which is the exit for personnel and equipment. Inside the passage, a closed door that is easy to close and that is both waterproof and fireproof should be provided. A reliable control gate should be provided for the connection between the pump house and the water tank. When the gate is closed, the pump room must also have an independent ventilation tunnel. The ground level of the pump house should be 0.5m higher than the bottom of the well site and 1% slope to the water side. When the displacement of the pump is less than 100m 3 ·h -1 , the suction pipes of the two pumps can share one suction well, but the distance between the edges of the water filter should not be less than 2 times the diameter of the suction pipe; the displacement is 100m 3 ·h -1 Pumps of above and above shall be provided with separate suction wells. (2) Drainage pipe Drain pipes are generally laid in the ducts of the wellbore. When the vertical height is less than 200m, a welded pipe can be used; if the vertical depth exceeds 200m, a seamless steel pipe can be used. At least two main drainage pipes of the mine shall be laid. When one fails, the other must discharge the normal water inflow of the mine for 24 hours within 20 hours. The drain pipe is close to the water pump, and the gate valve and the check valve are set. The gate valve is used for adjusting the displacement and opening and closing the drain pipe; the check valve prevents the water in the water pipe from flowing back into the water pump to damage the impeller when the pump is stopped.
Our filling machine includes small bottle Water Filling Machine, hot juice filling machine, Carbonated Drinks Filling Machine, 5L bottle filling machine, 5 gallon filling machine.
It adopts hanging type conveying-bottle structure to make changing bottle model more convenient, faster and easier. The main machine adopts advanced PLC control technology. The key electric elements adopt international famous products.
Let us know your detailed information, like output, final product, volume etc, we will make the completely plan for your reference. Welcome your inquiry!
Filling Machine,Water Bottle Filling Machine,Bottle Filling Machine,Automatic Filling Machine WENZHOU WINIBER MACHINERY EQUIPMENT CO., LTD. , https://www.winibermachinery.com
1—water injection port; 2— water pump shaft; 3—impeller; 4—chassis; 5—drain pipe; 6—sucking well; 7—sucking cover; 8—sucking pipe
Mine drainage equipment mainly includes water pumps and water pipes.
Figure 1 Single stage centrifugal pump