During the maintenance of Dongfeng Tanker, there are many parts and components that are working. Some parts are charged, and these parts will bring certain safety risks to maintenance. The following Hubei Hongyu Special Automobile explains the precautions of Dongfeng Tanker safety maintenance: 2. When the Dongfeng Tanker works, it is necessary to confirm that the vehicle is in the parked state, to ensure that the parking brake is pulled up, and the wheels are to be put on obstacles so as to prevent the maintenance from moving. 3. Do not touch the maintenance vehicle when the components of the Dongfeng Tanker are in a hot state. Allow the components of the vehicle to be completely cooled. The cooling time of the vehicle is not less than 15 minutes. 4. If you want the Dongfeng Tanker to leave the ground in whole or in part, use a jack to lift the car. Make sure that the pillars are firmly fixed under the frame and can be maintained properly. Be sure to keep children's pets, etc., out of the vicinity during maintenance on the vehicle so as not to cause unnecessary harm. 5. The battery is one of the parts of the Dongfeng Tanker that is charged. Therefore, be extra careful when servicing the area around the battery. 6. The Dongfeng tanker's on-board computer is a sensitive and expensive component. When we connect diagnostic tools or wiring, we must carefully follow the manufacturer's instructions. XCMG Chu Sheng (Hubei) Special Purpose Vehicle Manufacturing Co., Ltd. The main varieties are: garbage trucks, sprinklers, suction trucks, sewage suction trucks, road sweeper vehicles, aerial vehicles, fire engines, plus (transport) oil trucks, trucks Crane, bulk cement, powder material transport vehicles, vans, cement mixers, dump trucks, semi-trailers and other series of products. The company designs innovative, reliable products to meet the needs of domestic and foreign customers. We will always follow the principle of quality first, reputation first and service first. We will return to society with real and reliable products and warm and thoughtful service.
There are many problems in the recovery of copper chips directly into the furnace, the recycling of copper brass chips reduces the production cost of foundry enterprises and greatly improves the market competitiveness of the enterprises. The copper scraps are small, loose, directly into the furnace will be seriously blocked, the material block clearance is the furnace gas rising channel, directly affect the smelting process, the loose steel scrap without pressing, extremely easy to float on the furnace lining, corrosion lining, and large loss of raw materials will cause low molten iron rate.
Copper Briquetter, Brass Briquette Machine, Copper Chips Briquette Machine, Copper Briquetting Press, Copper Briquetting Machine Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecobalingmachine.com
1. Don't allow any open fire to enter into gasoline in the maintenance of Dongfeng Tanker. Because gasoline is flammable and explosive, a little spark can make it burn.
Welcome to inquire: Sales Manager (Xu) 15672996222
Dongfeng Tanker Safety Maintenance Attention Seven Things