A research team from South Korea recently demonstrated a new type of sodium ion rechargeable battery at room temperature and high energy density using a sulfur dioxide-based inorganic fusion cathode electrolyte that serves as both a sodium ion-conducting electrolyte and a cathode material. According to the total mass of the catholyte and the carbon electrode, the discharge capacity of the new sodium ion battery is 153 mAh / g and the operating voltage is 3V. The battery pack has excellent charge and discharge performance under high current conditions, as well as the charge-discharge cycle performance Very outstanding, able to more than 300 times. Of particular note is that the new inorganic liquid electrolyte has flame resistance and self-reconfiguration features that help accelerate the commercialization of sodium ion rechargeable batteries. The researchers constructed a battery containing 2032 sodium-sulfur dioxide button cells using a sodium metal anode and a long and short carbon cathode. The liquid electrolyte was a sodium aluminum chloride and sulfur dioxide complex solution. Based on a discharge rate of 0.1 coulomb carbon cathode, the discharge capacity of the cell is about 1800 mAh / g (or 4.1 mAh / cm), which compares favorably with the conventional commercial Li-ion battery (3-5 mAh / Square centimeters) is basically equivalent, much better than previously reported performance of lithium-ion batteries and sodium-oxygen batteries. The discharge capacity of the sodium-sulfur dioxide battery can reach 897 mAh / g, even at high current densities of 5 coulombs. However, the energy efficiency between charge and discharge is only about 80%, this point needs to be further improved. Sodium-sulfur dioxide battery after repeated charge and discharge cycles, the storage capacity decay rate is relatively low; each discharge process energy exhausted, and high-coulomb rate of high-current charge and discharge conditions, after 100 cycles of storage capacity to reach 75% of new battery pack. The cell chemistry is a highly reversible redox reaction between sulfur dioxide and sodium tetrachloroaluminate. A composite inorganic electrolyte consisting of sodium aluminum chloride and sulfur dioxide ensures the reliability of the sodium-sulfur dioxide battery, The safety of the life cycle is also guaranteed.
slant board is not only helpful for stretching before/after exercise but also beneficial to the body's recovery from plantar fasciitis, Achilles tendon injuries, shin splints, calf strains, and other foot and ankle injuries and pain. Regain your flexibility and discover new possibilities with the slant board. Just need a slant board to keep away from pain.
The slant board for calf stretching is an EPP environmentally friendly materials that are non-toxic, odorless, waterproof, and oil-proof, which is not only recyclable, but also degrades naturally without causing white pollution. The calf stretcher is lightweight, sturdy, non-deformable and easy to carry. Our foot stretcher weighs only 0.9 lbs, but can hold up to 480 lbs.
5 adjustable incline settings: 8.5°, 17°, 25.5°, 34° and 180°. You can use 5 different angles for physical therapy on your needs, and the detachability allows you and your family to use the calf stretcher at the same time. they can also be moved to every place in the house at will and can be reused many times. Remember to find a chair or lean against a door or wall as support during training. This way you can rely on them to get a better balance during training!
Slant Board,slant board,3 Pcs Foot Stretcher Incline Board,calf stretcher Jiangsu Laiao Material Technology Co., Ltd. , https://www.jslaiao.com