Double Girder Overhead Magnet Crane

Model NO.: QC

GB/T 28001-2001, Ohsas18001: 1999: Pass

Current Overload Protection System: Include

Voltage Lower Protection Function: Include

Weight Overload Protection Device: Include

Limited Switch: Include

Painting Color: According to Your Demand

Sandblast: Could Supply

Working Duty: A5, A6, A7, A8

Application: Construction Usage, Workshop Usage, Container Usage, Mineral Area Usage

Sling Type: Wire Rope

Power Source: Electric

Moving Type: Wheel

Installation: Overall Rapid Disassembly

Tower Crane Type: Overhead Magnet Crane

Trademark: KUANGYUAN

Transport Package: Packed by Plywood Crate and Plastic Woven Cloth.

Specification: China National standard

Origin: Xinxiang, Henan Province

HS Code: 84261930

Model NO.: QC

GB/T 28001-2001, Ohsas18001: 1999: Pass

Current Overload Protection System: Include

Voltage Lower Protection Function: Include

Weight Overload Protection Device: Include

Limited Switch: Include

Painting Color: According to Your Demand

Sandblast: Could Supply

Working Duty: A5, A6, A7, A8

Application: Construction Usage, Workshop Usage, Container Usage, Mineral Area Usage

Sling Type: Wire Rope

Power Source: Electric

Moving Type: Wheel

Installation: Overall Rapid Disassembly

Tower Crane Type: Overhead Magnet Crane

Trademark: KUANGYUAN

Transport Package: Packed by Plywood Crate and Plastic Woven Cloth.

Specification: China National standard

Origin: Xinxiang, Henan Province

HS Code: 84261930
Double Girder Overhead Magnet Crane

Application:
This crane is a special product equipped with electromagnetic carrier beam that used to lift iron or steel plates, pipes and so on. It consists of bridge, crane travelling mechanism, trolley, electric equipment and lifting beam. Both travelling mechanism and trolley motors are special motors for cranes, large starting torque and loading capacity.
The electromagnetic beam can be taken down from the hook or desinged as fix hanger. The beam length can be designed as requirements. The beam can be parallel of plumbing with crane girders depending on transporting environment.
For higher application requirements, extractable and 360 degree electromagnetic beam suspending system can be provided. Double Girder Overhead Magnet Crane 40 ton

The number of rectangular magnets below spreader beam is considered to the size of long billet need to be lifted.
Maximum back up time of battery for magnets shall have of 30 minutes.
The magnets is suitable for temperature under 200 deg C.
Full length chequered plate platform at both sides. The minimum width of platform as request.
Load cell for over load protection of hoist on request.
Alarm bell provided for safety purpose.
Canopy is provided for electrical equipments for weather protection outdoor. Rail anchoring & storm anchoring are all on request. Double Girder Overhead Magnet Crane 40 ton
The General arrangement drawing with load data & Quality Assurance Plan will be submitted with offer
Initial fill of lubricants, gear box oil etc., supplied along with the crane.

Performance feature:
The carrier-beam is cross structure, which is reliable and has good safety features, and has a certain function of preventing swinging. The lower part of the carrier-beam can bring special lifting appliances, such as magnetic chuck and tongs, etc.
Safety Feature:
Main lifting motor with thermal protection,
Overload protection,
Rubber buffers Double Girder Overhead Magnet Crane 40 ton
Protective earthing,
Crane switch and travel end switch,
Emergency switch can stop all movement when any dangerous happened,
Sub-assemblies characteristic are tested before assembly.
All cranes must be pre-assembled and tested before leaving factory and offer the certification of test.

Used in:
Ship Yards
Metal Working
Service Centers
Cutting Table Operations
Shipping and Receiving
Fabricating Areas
Welding Departments

Customization
We can design cranes meets your need, it would be very kind of you to give us the data needed listed below:
1. Lifting capacity.
2. Span length. (cantilever length)
3. Lifting height. (hook center to ground)
4. Power supply: Voltage.
5. Do you need rails? How long is the crane traveling distance?
6. Working condition: Which material to lift? Temprature?
7. Would be better if you have drawings of your plant.

ITERM Â QC type grab crane

Lifting Capacity t 5 10 16 20

Span m to 31.5

Working Class Â A6

Speed Hoist m
/
min 40.1 40.7 41.8 48.6

Trolley 44.6 45.6 41.8 48.6

Crane 93.7 86.4 76 89 89 87.3 87.3

Motor hoist closing Kw YZR225M-8/22*2 YZR280S-10/37*2 YZR315M-10/75*2 YZR355M-10/90*2

trolley YZR132M ₂ -9/3.7 YZR160M ₂ -6/7.5*2 YZR160M ₂ -6/7.5

crane YZR160M ₁ -5.5*2 YZR160M ₂ -6/7.5*2 YZR160M ₂ -6/7.5*2 YZR160L-6/11*2 YZR160L-6/11*2 YZR180L-8/11*2 YZR180L-8/11*2 YZR200L-8/15*2

Power Â 3-phrase 50HZ 220V~480V according to your requirements

Working environment Â The temperature of working environment is -10~+60Â° C;
The relative humidity is no more than 50% when the temperature is +40Â° C;

Double Girder Overhead Magnet Crane

Application:
This crane is a special product equipped with electromagnetic carrier beam that used to lift iron or steel plates, pipes and so on. It consists of bridge, crane travelling mechanism, trolley, electric equipment and lifting beam. Both travelling mechanism and trolley motors are special motors for cranes, large starting torque and loading capacity.
The electromagnetic beam can be taken down from the hook or desinged as fix hanger. The beam length can be designed as requirements. The beam can be parallel of plumbing with crane girders depending on transporting environment.
For higher application requirements, extractable and 360 degree electromagnetic beam suspending system can be provided. Double Girder Overhead Magnet Crane 40 ton

The number of rectangular magnets below spreader beam is considered to the size of long billet need to be lifted.
Maximum back up time of battery for magnets shall have of 30 minutes.
The magnets is suitable for temperature under 200 deg C.
Full length chequered plate platform at both sides. The minimum width of platform as request.
Load cell for over load protection of hoist on request.
Alarm bell provided for safety purpose.
Canopy is provided for electrical equipments for weather protection outdoor. Rail anchoring & storm anchoring are all on request. Double Girder Overhead Magnet Crane 40 ton
The General arrangement drawing with load data & Quality Assurance Plan will be submitted with offer
Initial fill of lubricants, gear box oil etc., supplied along with the crane.

Performance feature:
The carrier-beam is cross structure, which is reliable and has good safety features, and has a certain function of preventing swinging. The lower part of the carrier-beam can bring special lifting appliances, such as magnetic chuck and tongs, etc.
Safety Feature:
Main lifting motor with thermal protection,
Overload protection,
Rubber buffers Double Girder Overhead Magnet Crane 40 ton
Protective earthing,
Crane switch and travel end switch,
Emergency switch can stop all movement when any dangerous happened,
Sub-assemblies characteristic are tested before assembly.
All cranes must be pre-assembled and tested before leaving factory and offer the certification of test.

Used in:
Ship Yards
Metal Working
Service Centers
Cutting Table Operations
Shipping and Receiving
Fabricating Areas
Welding Departments

Customization
We can design cranes meets your need, it would be very kind of you to give us the data needed listed below:
1. Lifting capacity.
2. Span length. (cantilever length)
3. Lifting height. (hook center to ground)
4. Power supply: Voltage.
5. Do you need rails? How long is the crane traveling distance?
6. Working condition: Which material to lift? Temprature?
7. Would be better if you have drawings of your plant.

ITERM Â QC type grab crane

Lifting Capacity t 5 10 16 20

Span m to 31.5

Working Class Â A6

Speed Hoist m
/
min 40.1 40.7 41.8 48.6

Trolley 44.6 45.6 41.8 48.6

Crane 93.7 86.4 76 89 89 87.3 87.3

Motor hoist closing Kw YZR225M-8/22*2 YZR280S-10/37*2 YZR315M-10/75*2 YZR355M-10/90*2

trolley YZR132M ₂ -9/3.7 YZR160M ₂ -6/7.5*2 YZR160M ₂ -6/7.5

crane YZR160M ₁ -5.5*2 YZR160M ₂ -6/7.5*2 YZR160M ₂ -6/7.5*2 YZR160L-6/11*2 YZR160L-6/11*2 YZR180L-8/11*2 YZR180L-8/11*2 YZR200L-8/15*2

Power Â 3-phrase 50HZ 220V~480V according to your requirements

Working environment Â The temperature of working environment is -10~+60Â° C;
The relative humidity is no more than 50% when the temperature is +40Â° C;

Forgings are produced by 1000T+1600T electric screw press machine and Swiss Hatebur high-speed forging equipment AMP30S with medium frequency induction heating and full automatic operating by Robot for high quality assurance, lower allowance, advantages of materials saving and better metal streamline.
Gear Blank
Gear Blank,Forged Gear Wheel Blank,Auto Parts Gear Blanks,Bronze Gear Blank
ZHEJIANG XCC GROUP CO.,LTD. , https://www.xccbearing.com

ITERM			Â QC type grab crane
Lifting Capacity		t	5		10		16		20
Span		m	to 31.5
Working Class		Â	A6
Speed	Hoist	m / min	40.1		40.7		41.8		48.6
	Trolley		44.6		45.6		41.8		48.6
	Crane		93.7	86.4	76	89	89	87.3	87.3
Motor	hoist closing	Kw	YZR225M-8/22*2		YZR280S-10/37*2		YZR315M-10/75*2		YZR355M-10/90*2
	trolley		YZR132M ₂ -9/3.7		YZR160M ₂ -6/7.5*2		YZR160M ₂ -6/7.5
	crane		YZR160M ₁ -5.5*2	YZR160M ₂ -6/7.5*2	YZR160M ₂ -6/7.5*2	YZR160L-6/11*2	YZR160L-6/11*2	YZR180L-8/11*2	YZR180L-8/11*2	YZR200L-8/15*2
Power		Â	3-phrase 50HZ 220V~480V according to your requirements
Working environment		Â	The temperature of working environment is -10~+60Â° C; The relative humidity is no more than 50% when the temperature is +40Â° C;