HONY®Polyethylene (PE) plastic is a semi-crystalline thermoplastic with high toughness and excellent chemical resistance. Compared with other plastics, polyethylene plastics have lower mechanical strength and high temperature resistance.High Density Polyethylene (HDPE) sheet is extremely strong against impact, abrasion resistant, and exhibits a low coefficient of friction. The material is also moisture, stain, and odor resistant, and is FDA approved for use in the food processing industry (mainly for cutting boards). The material's durability makes it a perfect match for a variety of applications such as water tanks, chute linings, bottle/bottle cap production and numerous other industrial uses. Borated HDPE offers radiation protection in nuclear facility applications.
High-density Poly Ethylene also is known as HDPE is made from a cord of ethylene molecules (the poly part of polyethylene), and is famous for its light weight and high durability.
The preference of HDPE sheets is increasing from leaps and bounds in the market today, as it's able to cut down on the material which is then used for producing and packaging products for its strength and weight.
It is also available at tap plastics in sheet form with either a smooth or textured surface. The textured surface is also called cutting board. Both smooth and textured surfaces are FDA approved for food contact.
HONY®PE series products include the following materials:
Polyethylene
(PE)
Polyethylenes are semi-crystalline materials with excellent chemical resistance, good fatigue and wear resistance and a wide
range of properties. Polyethylenes are easy to distinguish from other plastics because they float in water. Polyethylenes
provide good resistance to organic solvents, degreasing agents and electrolytic attack. Polyethylene is used more than any
other thermoplastic polymer. There are a wide variety of grades and formulations available that have an equally wide range of
properties.
Benefits
Durability Easily fabricated
Chemical resistance
Abrasion resistance
Good electrical properties
Impact resistance
Low coefficient of friction
Moisture resistance
Applications
Packaging
Skid
Plates
Conveyer
Systems
Tanks
Containers
Truck liners
POLYETHYLENE GRADES
Low Density Polyethylene (LDPE)
This extruded material offers good corrosion resistance and low moisture permeability. It can be used in applications where
corrosion resistance is important, but stiffness, high temperature, and structural strength are not. A highly flexible product,
LDPE is used widely in orthopaedic products, or where mobility without stress fatigue is desired. LDPE is also frequently used
in consumer packaging, bags, bottles, and liners.
Benefits
Lightweight
Formable
Impact
Resistant
Good electrical properties
Easily cleaned
Easily Fabricated
Applications
Chemical resistant tank and containers
Food storage containers
Laboratory equipment
Corrosion resistant work surfaces
Vacuum formed end caps and tops
Moisture barrier
POLYETHYLENE GRADES
High Density Polyethylene (HDPE)
Representing the largest portion of the polyethylene applications, HDPE offers excellent impact resistance, light weight, low
moisture absorption, and high tensile strength. HDPE is also non-toxic and non-staining and meets FDA and USDA certification for food processing.
Benefits
Abrasion Resistant
High impact resistance
Low coefficient of friction
Abrasion resistant
Scratch and marking resistant
Chemical resistant
Water and moisture resistant
Applications
Food cutting boards
Corrosion resistant covers
Pipe flanges
Radiation shielding
Self-supporting containers
Prosthetic devices
Ultra High Molecular Weight Polyethylene (UHMW PE)
UHMWPE is light weight (1/8 the weight of steel), high tensile strength, and is easily machined. It is the ideal material for
many wear parts in machinery and equipment as well as a superb lining in material handling systems and storage containers.
UHMW PE is self-lubricating, shatter resistant, long-wearing, abrasion and corrosion resistant. It meets FDA and USDA acceptance for food and pharmaceutical equipment and is a good performer in applications up to 180 °F (82 °C) or when periodically cleaned with live steam or boiling water to sterilize.
uhmwpe Benefits
Durability
Easily fabricated
Chemical resistance
Abrasion resistance
Electrical properties
Impact resistance
Low coefficient of friction
Moisture resistance
hdpe Applications
Tanks and containers
Food storage containers
Laboratory equipment
Disposable formed products
Surface structures
Vacuum formed end caps
and tops
Moisture barrier
Sheet Hdpe Feature
Low density
Excellent wear resistance
Very resistant to damage
High toughness (the same at low temperature)
High elongation at break
Excellent electrical and dielectric properties
Very low water absorption
Low vapor permeability
Strong chemical resistance
Good resistance to stress cracking
Food safety
Polyethylene Sheet Application
Guide pulley
Guide chain
Pads for storage blocks, silos and conveyor channels
Suction cups and filter plates
Pumps and valves
Gasket
Slide model
Food industry parts
Polyethylene Sheet,Polyethylene (High Density) HDPE,uhmwpe plate shaft,hdpe,Ultra high molecular weight polyethylene Hony Engineering Plastics Limited , https://www.honyplastic.com
On March 11, 2014, Beijing New Energy Co., Ltd., the largest new energy automobile manufacturer in China, reached a strategic cooperation with Jingdong, a well-known e-commerce company in China, and further promoted the adoption of new energy vehicles in the domestic market through the e-commerce platform. Cross-border integration of new energy vehicles and e-commerce.
According to the agreement, the two parties will achieve a number of cooperation and resource sharing at the strategic and operational levels, including the following five contents: 1. To build a strategic cooperation platform. Integrate the advantages of their respective industrial chains, build a new energy vehicle index research center based on big data, promote the “car networking hardware and software and service product incubator†project; 2. carry out joint investment. Including big data applications, intelligent traffic management systems, investment and acquisition of cutting-edge technologies in new energy vehicles, etc.; 3. Promoting the formulation, landing, and implementation of various new energy vehicle standards in China's logistics express industry; 4. Taking the lead in the promotion of the logistics industry The identified new energy vehicles will strive to promote the use of 5000 electric logistics vehicles in the Jingdong logistics system within 2 years to reduce energy consumption and emissions in the logistics industry. 5. Launch joint marketing. It has built a new flagship store for BAIC New Energy, and a green flow of Jingdong-Beiqi New Energy to raise the target market for new energy vehicles. The next step is to jointly contribute to the popularization of new energy vehicles.
The cross-border cooperation will integrate new energy vehicles with e-commerce, closely integrate BAIC's sales of new energy vehicles and the Internet, improve user convenience, promote green travel, and lay a good foundation for the city's 2017 new energy automotive application scale. basis.
Item
RESULT
UNIT
PARAMETER
NORM USED
Mechanical properties
Modulus of elasticity
1000
MPa
In tension
DIN EN ISO 527-2
Modulus of elasticity
1000 - 1400
MPa
In flexure
DIN EN ISO 527-2
Tensile strength at yield
25
MPa
50 mm/min
DIN EN ISO 527-2
Impact strength (Charpy)
140
Kj/m 2
Max. 7,5j
Notched Impact stren. (Charpy)
No break
Kj/m 2
Max. 7,5j
Ball indentation hardness
50
MPa
ISO 2039-1
Creep rupture strength
12,50
MPa
After 1000 hours static load 1% elong. after 1000 hours Against steel p=0,05 N/mm 2
Time yield limit
3
MPa
Coefficient of friction
0,29
------
Thermal properties
Glass transition temperature
-95
°C
DIN 53765
Crystalline melting point
130
°C
DIN 53765
Service temperature
90
°C
Short term
Service temperature
80
°C
Long term
Thermal expansion
13 - 15
10-5K-1
DIN 53483
Specific heat
1,70 - 2,00
J/(g+K)
ISO 22007-4:2008
Thermal conductivity
0,35 - 0,43
W/(K+m)
ISO 22007-4:2008
Heat distorsion temperature
42 - 49
°C
Method A
R75
Heat distorsion temperature
70 - 85
°C
Method B
R75
