• Model NO.: KBF-CO60
  • Applicable Material: Nonmetal
  • Technical Class: Continuous Wave Laser
  • Laser Classification: Gaseous Laser
  • Marking Method: Scanning Marking
  • Control Software: Ezcad/ Samlight
  • After-Sales Service Provided: Engineers Available to Service Machinery Overseas
  • Trademark: KBF
  • Specification: 600mmx800mmx1450mm
  • HS Code: 84561000
  • Laser Visibility: Invisible
  • Cooling System: Air Cooling
  • Laser Wavelength: CO2 Laser
  • Type: CO2 Laser Marking Machine
  • Working Accuracy: 0.005mm
  • Power: 10W/20W/30W/60W/100W
  • CNC or Not: No
  • Transport Package: Wooden Case
  • Origin: China (Mainland)
Factory table R-F Glass Tube CO2 Laser Marking Machine

Different type laser marking machine
Fiber laser marking machine: Low cost and Widely used for lot kinds of metal or nonmetal materials;
Pump laser marking machine: Less used and only for some special materials or deep marking or wire stripping;
CO2 laser marking machine: Mainly used for non-metallic (wood, Akley, paper, leather,etc.);
Green laser marking machine: Very fine marks, mainly used for high-end metal, plastic and other low demand products;
UV laser marking machine: Most fine marks, Mainly for high-end products, such as IC and precision work pieces.

 
Two types of co2 Laser

1. Glass Tube: the fram is larger to adapt the length of the tube
Factory Non Metal Ceramic Glass Acrylic and Wood Table R-F Glass Tube CO2 Laser Marking Machine
2. Metal Tube: with small size but heavier
Factory Non Metal Ceramic Glass Acrylic and Wood Table R-F Glass Tube CO2 Laser Marking Machine
Details of two kinds of co2 laser
Factory Non Metal Ceramic Glass Acrylic and Wood Table R-F Glass Tube CO2 Laser Marking Machine
RF Series Co2 Laser Marking Machine installed RF Metal Co2 Laser Tube, is the new generation Laser Marking System, adopt industrial standardization module design, full set of imported metal sealed radiation frequency co2 lasers, high speed scanning vibrating lens and extending focusing system, high stability, anti-intervention industrial computer system, high precise vertical up-and-down working table. 

The machine can work on a continuous 24 working hours in high stability, high precision, high speed.
Co2 Laser Marking Machine can adjust the focus length by electronic motor and easy to operate and Laser Marking Service has won good feedback from our customers.

Production Introduction

Adopting USA original Synrad or Coherent R-F metal tube laser source, high-speed scanner imported originally from USA, this series laser machine obtains high speed and high accurancy with laser focusing solution in the rear part.By using Window interface, the software of the machine is compatible with different output formats, CorelDraw, AutoCAD, photoshop. illustrator, etc.
The power, which controlled by software is continually adjusted.Due to no consumable material existing, the fabrication cost is lower.
It has high effectiveness with large marking area and fine marking laser beam.
Besides,the engraving depth can be controlled and adjusted for purpose.
It is suitable for all kinds of products of non-material.

Applicable Materials

Applicable toon-metal materials, such as paper, leather, cloth, organic glass, resin, acrylic, wool, plastic, rubber, ceramic, crystal, jade, bamboo and wood crafts.
Widely apply to different kinds of consumer commodities,food beverage packaging, medicine packaging,architecture ceramic, costume and accessories, leather and wool, gift and crafts, nameplates, jeans, furniture, etc.


Warranty and Service
 Two years warranty for the whole machine.
   1. Teach video and detailed manual sent with the machine.
   2. 24 hours online support.
   3. Professional technical support.
   4. Free design and guide for customer
   5. Free design and guide for customer
   6. Free software update
We can supply the new machine parts of fix the old one.

Advantage
Δ Long work lifespan                      Δ 24 Hous continuous work
Δ High accurancy                          Δ Cost effectiveness
The equiptment is of low processing cost, without any consumption and with small power, high efficiency, its marking area can ba large and clear enough, as well as not easy to worn and of high efficiency.
 
Used area
Ceramic, PVC, ABS, acrylic, glass, wood, paper, widely used in wood, craft, gifts,electronic components, clothing, leather, food packaging and other industries.

Sameple show
Factory Non Metal Ceramic Glass Acrylic and Wood Table R-F Glass Tube CO2 Laser Marking Machine
 
Technical parameters
Type KBF-CO10X KBF-CO30X KBF-CO60X KBF-CO100R
Laser wavelength 9300nm-10600nm
Beam quality M2≤1.3 M2≤1.8 M2≤2.2 M2≤2.8
Power 10W 30W 60W 100W
Frequency 1KHz~20KHz 1KHz~25KHz 1KHz~30KHz 1KHz~40KHz
Power stability <±1%rms
Scan field 70mmx70mm(Customized)
Cooling mode Air
Power requirement 220V/380V
Fram size (Customized) 600mmx800mmx1450mm
       There are two kinds of configurations for co2 laser marking machine. One is the R-f tube(metal tube ) with more than 30000 hours lifespan; the other is glass tube with almost 3000-6000 hours lifespan. The former kind can be inflated after its using while the later one need to change the tube.

Company information & Our team
Factory Non Metal Ceramic Glass Acrylic and Wood Table R-F Glass Tube CO2 Laser Marking Machine
Why choose us?
* 24 h on-line service;
* Quality is our culture;
* We have ourself factory;
* Free sample test & Free parts;
* Good package & Quick delivery time;
* All products have CE FDA certifications;
* Two years warranty and with lifetime service;
* Engineers available to service machinery overseas
* Training how to install and use the machine and software;
* Professional team---engineers with 3 to 10 years work experiences 

Buyers Need to Know
Factory Non Metal Ceramic Glass Acrylic and Wood Table R-F Glass Tube CO2 Laser Marking Machine

FAQ:
Q: I know nothing about the fiber laser marking machine, what kind of machine I should choose?
       Just tell us what you want to do using this machine. And sending us a sample picture is better.
Then we will send you a perfect solutions and suggestions.
Q: When I get this machine, but I don't know how to use it. What should I do?
        We will send you the English manual and CD video for machine using and maintaining with machine. If u still have some doubts, we can talk by telephone or by WHATSAPP  /  SKYPE.   Our   engineer   can   also be sent to your country to install or adjust machine if necessary.
Q: If some problems happened to this machine during warranty period, what should i do?
  We will supply free parts for this machine during the warranty period if machine have any problems.We also supply free after-service forever. So any doubts, just let us know, we will give you solutions within 30 min.
Q: How long is the delivery time?
     For the fiber laser marking machine, the delivery time will be 2-3 days
Q: The payment terms?
    1. T/T, 30% in advance, pay the balance before delivery.
    2. Through Alibi-Ali Escrow.
    3. L/C
Q: How about the packaging
      Firstly, Packed the fiber laser machine with plastic sheet for clearing and damp proofing.
      Secondly, Then put the fiber laser machine in the wooden case for safety and clashing.
      Thirdly, Transport the wooden case into the container.
Q: Are you a factory or a trading company?
A: We are factory manufacturing packaging machines and we provide perfect OEM and after-sale service.
Q: How can I know your machine works well?
A: Before delivery, we do test the machine working condition for you.
Q: How can I know your machine is designed for my product?
A: You can send us samples of your product and we test it on machine.
Q: How can I pay my order?
A: We accept T/T, Western Union paying methods. For those orders less than 1000USD, we accept PayPal to pay.
Q: Do you have a CE/FDA certificate?
A: For every model of machine, it has a CE/ FDAcertificate.
Q: If we do not know how to use the machine,can you teach us?
Yes,we will ,if you come to China,we will offer you free training until you can use machine freely.And if you are busy ,we will have our professionall engineer to your country,you only need pay for some fee,like tickets, hotel and meal.
Q: When the machine can't work well,What should I do?
1. The Engineer is online for 24-hours, they can check the problems and then give you solution way very soon.
2.All our machines have two years' warranty, If there is any problems of machine parts under "normal use",new machine parts will be sent by air and customer pay for the shippemnt cost only.
3.Please rest assured that operation CD and manual will be offered along with machine,ensuring you can operate the machine easily.
 

Your satisfication is our Honor.

Contact us for more information:

How to contact us?
Contact person:                                        Daelin
  
Mobile Number   +86-15012701030
  
Company Website:                                   www.kbflaser.com/en

  
 
Company: Shenzhen KBF Laser Technology Co., Ltd.
If you have any questions, pls feel free to contact  me. Thank you!
 

Cold Roll Forming Machine 

The metal profile produced by Roll Forming Machine look beautiful, elegant and noble. They are widely used for garden, factory, hotel, exhibition center and villa, etc.

Cold Roll Forming Machine Components:

Roll forming machine consists of Uncoiler, Coil sheet guiding device, Main roll forming system, Post cutting device, Hydraulic station, PLC control system and Support table.

Optional with Hydraulic Decoiler, Auto Stacker, Safe Cover, Pre-Cutting, Film Covering Device, and so on.

Cold Roll Forming Machine Working Flow:

Decoiling→Feeding & Guiding→Flattening(If needed)→Pre- Punching/Cutting(If needed)→Roll Forming→Post Step pressing/Punching(If needed)→Post Cutting→Finished Products To Support Table

Parameter:
1.Suitable to process:Colored Steel plate, galvanized board
2.Width of the plate:1000/1200/1250mm
3.Roller stations:10-19rows
4.Rolling material: Forging Steel 45#
5.Rolling galvanization thickness:0.05 mm
6.Material of the cutting blade :Cr12
7.Hydraulic oil :40#
8.Dimensions: 9000mm*1700mm*1600mm

9.Motor:4+4kw
10.Thickness of the plate:0.3-0.6mm
11.Productivity:8-10m/min
12.Diameter of the roller:70mm
13.Weight:About 4.6 T
14.Voltage:380V 50Hz
15.Processing precision : within 1.00mm
16.Transportation:one complete machine need one 40feet container to hold
17.Payment term:30%deposit,and balance before delivery
18.Standard components: Chain 1 pcs, Hydraulic oil pipes: 2 pcs, electromagnetism valves 1 pcs. limit switch:2 pcs
19.This machine is composed of feeding table,forming machine, pressing device,cutting device, hydraulic system,computer control system,discharge table.
Optional devices have manual uncoiler,hydraulic uncoiler,auto stacker and so on.



Cold Roll Forming Machine

Cold Roll Forming Machine, Cold Forming Machine, Cold Rolling Machine

Botou Xianfa Roll Forming Machine Factory , https://www.rollforming.nl

Posted on