Forged Brass Water Pressure Reducing Relief Valve

Nominal pressure: 1.6MPa

Working temperature: -20 to 150°C

Suitable medium: water

Thread: ISO07

Pressure testing: ISO5208

Component and material:

Body: brass

Spring: stainless steel

Spring: PVC

Seal gasket: PVC

Piston: PVC or brass

Bonnet: PVC

Filter: brass

Size: 1/2 to 4 inches

1. Nominal pressure:1.6MPa;
2. Working medium: hot & cold Water, Compressed Air, Oil, Non-Corrosive Fluid;
3. Working temperature: 0°C to 120 °C;

4. Adjustable range of pressure: when input pressure is 1.0MPa or above, the output pressure is 0.15MPa to 0.45MPa; when the input is less than 1Mpa, the output pressure reduce accordingly;

5. More options for customer, both Heavy model & Economic model available to satisfy diversified demand.

6. Thread standard: BSP or NPT can be optional.
Features
1. Material :316ss, titanium, other material as request
2. Working Pressure: up to 1000 psi
3.Working Temperature: --65''F to 850''F(--53°c to 455°c)
4.End Connection Type: metric and fractional tube fittings, NPT threads, ISO/BSP threads, weld ends
5. End Connection Size: 1/8 to 3/4 in., 3 to 12mm

Performance
1.compact design forspecial extreme working conditions
2.cold rolled threads of compact valve stem
3.non-rotary ball type lower stem and adjustable lower stem available
4. union-bonnet design prevents accidental valve disassembly
5.lubricated stem threads isolated from the process media
6. safety back seat seal in fully open position
7. panel mounting available
8.steady and durable fastening of the valve handle by double lock-pin

1. Product catalogue:

2.BCT Customer


 

3.Workshop and process

 

4.Inspection and test

 

 

 

Nominal pressure: 1.6MPa

Working temperature: -20 to 150°C

Suitable medium: water

Thread: ISO07

Pressure testing: ISO5208

Component and material:

Body: brass

Spring: stainless steel

Spring: PVC

Seal gasket: PVC

Piston: PVC or brass

Bonnet: PVC

Filter: brass

Size: 1/2 to 4 inches

1. Nominal pressure:1.6MPa;
2. Working medium: hot & cold Water, Compressed Air, Oil, Non-Corrosive Fluid;
3. Working temperature: 0°C to 120 °C;

4. Adjustable range of pressure: when input pressure is 1.0MPa or above, the output pressure is 0.15MPa to 0.45MPa; when the input is less than 1Mpa, the output pressure reduce accordingly;

5. More options for customer, both Heavy model & Economic model available to satisfy diversified demand.

6. Thread standard: BSP or NPT can be optional.
Features
1. Material :316ss, titanium, other material as request
2. Working Pressure: up to 1000 psi
3.Working Temperature: --65''F to 850''F(--53°c to 455°c)
4.End Connection Type: metric and fractional tube fittings, NPT threads, ISO/BSP threads, weld ends
5. End Connection Size: 1/8 to 3/4 in., 3 to 12mm

Performance
1.compact design forspecial extreme working conditions
2.cold rolled threads of compact valve stem
3.non-rotary ball type lower stem and adjustable lower stem available
4. union-bonnet design prevents accidental valve disassembly
5.lubricated stem threads isolated from the process media
6. safety back seat seal in fully open position
7. panel mounting available
8.steady and durable fastening of the valve handle by double lock-pin

1. Product catalogue:

2.BCT Customer


 

3.Workshop and process

 

4.Inspection and test

 

 

 

Zinc Die Casting Auto Parts are a metal forming process in which molten zinc metal is put under pressure and injected into a die.    

Zinc are alloys that have high strength and hardness, outstanding corrosion resistance,full recyclability, mechanical properties, high thermal and electrical conductivity and strength at high temperatures. Zinc alloys possess high dimensional stability for complex shapes and excellent thin walls. The cost of raw material is low.

Zinc Die Casting Auto Parts are efficient and economical and offers a wide range of durable shapes and components. Little or no machining is required after a part is die casted, because the process provides very close tolerances for even complex shapes. Zinc Die Castings can also be easily plated or finished. Zinc Die Casting Auto Parts are dimensionally stable and heat resistant.

Zinc Die Casting Auto Parts

Zinc of Auto Parts, Zinc Die Casting Parts, Zinc Die Casting of Auto Parts, Zinc Casting of Auto Parts

NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.bldiecasting.com