Contamination problems that have plagued companies for more than 40 years have been solved Sinochem New Network News Recently, with the operation of the waste acid treatment project of Gansu Yinguang Group Co., Ltd., the company's sulfuric acid mist emission concentration has been lower than the national emission standards, thus plaguing enterprises. More than 40 years of sulfuric acid fog pollution has been completely resolved.


It is understood that the company uses long-term traditional bubble-type sulfuric acid concentration furnace to treat waste sulfuric acid. Due to obsolete equipment and backward technology, sulfuric acid mist emissions exceeded the standard, reaching a maximum of 8,000 milligrams per cubic meter, causing serious pollution to the local environment and air. In 2007, Gansu Province vigorously coordinated the solution of the problem of the governance of the company. The National Science and Technology Bureau of the People's Republic of China, on the basis of consultations with the relevant state departments and weapons group companies, conducted repeated investigation and verification and approved the company’s environmental pollution of 393 million yuan. Governance project. In August of the same year, the project started construction.


Silver Light's environmental pollution control project is one of the four major projects in Baiyin City. The project consists of "wastewater treatment sub-items" and "spent acid treatment sub-items." The wastewater treatment project was commissioned in November 2009 and put into operation in May 2010. The wastewater treatment capacity was 560,000 tons per year. After the completion of the project, the company's production wastewater and domestic sewage will all enter the new wastewater treatment plant, which will be used for greening irrigation. All environmental protection indicators will meet the national first-class emission standards. After the completion of the waste acid treatment project, the production technology level and automation degree of the enterprise have been greatly improved, the sulfuric acid concentration rate has been significantly improved, the sulfuric acid mist and nitrogen oxides in the exhaust gas have been up to standard, and the pollution of sulfuric acid mist to the air has been effectively solved.

Composite Nylon Plastics Material PA12

Pellets PA12 Polyamide Nylon Composite
Pellets PA12 Polyamide Nylon Composite are good electrical insulators and, like other polyamides, do not affect the insulation properties due to moisture. It has good impact resistance and chemical stability. PA12 has many improved varieties in terms of plasticizing properties and reinforcing properties. And PA6 long glass

Compared to Pellets PA12 Polyamide Nylon Composite, these materials have a lower melting point and density and a very high moisture regain. PA12 long glass fiber pellets are not resistant to strong oxidizing acids. The viscosity of PA12 long glass fiber pellets depends mainly on humidity, temperature and storage time. It is very fluid. The shrinkage is between 0.5% and 2%, depending on the material variety, wall thickness and other process conditions Pellets PA12 Polyamide Nylon Composite polyamide 12 or nylon Pellets PA12 Polyamide Nylon CompositeTypical applications: water meters and other commercial equipment , cable sleeves, mechanical cams, sliding mechanisms, photovoltaic backplanes and bearings.

Nylon Pa12,Pa 12 Gf30,Pa12 Material,Pa12 Resin Granules

Zhejiang Xinli New Materials Co,.Ltd , https://www.shinylon6.com

Posted on