Air
Due to the harsh working environment of the ship, the hull shell is subject to chemical corrosion of seawater, electrochemical corrosion and corrosion of marine organisms and microorganisms; the hull is subjected to large wind and wave impacts and alternating loads; the shape of the ship is complicated by processing methods, etc. Steel for hull structure is strictly required. First of all, good toughness is the most critical requirement. In addition, high strength, good corrosion resistance, weldability, forming properties and surface quality are required.
Shipbuilding Steels Our hot rolled shipbuilding steel is produced in accordance with the relevant Classification Society, examples of which include Lloyds Register and Det Norske Veritas.
Our steel products include steel shipbuilding plate, fabricated steel sections and floor plate for decking. We can also supply bulb flats for plate stiffening, structural steel angles and inverted angles.
Our plates are supplied under the ASTM/ASME specification (ASTM A131 / ASME SA 131) which is the standard specification for Structural Steel for Ships. We offer higher strength shipbuilding steels as standard .High strength steels offer significant cost advantages by reducing the weight of the structure in comparison to the steel used.
The plates are suitable for use in the construction of container ships and large cargo freighters as well as commercial shipping lines such as luxury cruise ships and ferries. Supply options include heavy plates, surface treated plates and pre-fabricated sections. In most cases, the steel can also be supplied as hot rolled coils or cut into lengths (sheets).
These high yield materials are commonly used in the construction of hulls and superstructures for large shipping vessels. The grades are exclusively for shipbuilding use as set out in the standard.
Ship Building Steel Plate,Shipbuilding Steel Plate,Marine Steel Plate,Shipbuilding Plate Shandong Guanzhou Iron and Steel Group Co., Ltd. , https://www.guanzhouiron.com
GPL-G male elbow penumatic push fitting from china
 1. Â
QUICK installation, simple and flexible,space-saving
 2.
The tube fitting comes in a wide variety of models to meet all your needs in pneumatic piping
 3.
Even after installation,the direction of tubing can be changed freely
 4.
The release ring adopts the ellipse design to make it more convenient and labor saving for disconnection
 5.
All taper pipe threads are pre-coated with Teflon with fine seal performance.
 6.
All fitting are equipped with the internal hexagonal holes.It is easy for them to be mounted in the narrow places
Fluid Type
Operating Pressure
0-150PSI
Negative Pressure
-750mmHg(Torr)
Operating Temperature Range
-10°C ~60°C
Tube material
Nylon
Factory view
Contact us
  Tom
  Phone: +86 13738802960
  TEL: +86 574 63210528
Â
Â
Â
Â
Model NO.: GPL04-G01
Material: Brass
Connection: Push-in
Model Number: Gpl-G
OEM: Yes
Trademark: A&M
Transport Package: Plastic Bag+Box+Carton
Specification: normal
Origin: China
HS Code: 74122090