Model NO.: HT-LXP
Voltage: 380V
Power: 13.5kw
Certification: TUV SGS
Structure: Spraying Drier
Operation Pressure: Vacuum Dryer
Drying Medium: Superheated Steam
Appearance of Dried Sample: Bulk
Type of Flow: Contra-Flow
Type of Atomization: Gas Atomization
Sprayer: Air-Flowing Type
Trademark: HONEST
Transport Package: Fumigation-Free Wooden Case
Specification: 1.8*0.93*2.2m
Origin: China
                         High Speed Centrifugal Fruit Juice Spray Dryer
 
 
1.Machine Description:
Centrifugal Spray Dryer Machine is the technology most widely used in the liquid technology shaping and in the drying industry.The drying technology is most suitable for producing solid powder or particle products from liquid materials,such as: solution, emulsion, suspension and papumpable ste states,For this reason,when the particle size and distribution of the final products, residual water contents, mass density and the particle shape must meet the precise standard, spray drying is one of the most desired technologies.
 
2.Working Principle:
After been filtered and heated the air enters into the air distrbutor on the top of the dryer.The hot air enters into the drying room in the spiral form and uniformly. Passing through the high-speed centrifugal sprayer on the top of the tower,the material liquid will rotate and be sprayed into the extremely fine mist liquid beads.Throug the very short time of contacting the heat air,the materials can be dried into the final products.The final products will be discharged continuously from the bottom of the drying tower and from the cyclones. The waste gas will be discharged from blower.
 
3.Machine Features:
The drying speed is high when the material liquid is atomized,the surface area of the material will increase greatly.In the hot-air flow,95%-98% of water can be evaporated at a moment.The time of completing the drying is only several seconds. This is especially suitable for drying the heat sensitive materials. Its final products own the good uniformity, flow ability & solubility. And the final products are high in purity and good in quality. The producition procedures are simple and the operation and control are easy.The liquid with moisture contents of 40-60%(for special materials,the contents might be up to 90%).can be dried into the powder or particle products once a time. After the drying process, there is no need for smashing and sorting,so as to reduce the operation procedures in the production and to enhance the product purity.The product particle diameters,looseness and water contents can be adjusted through changing the operation condition within a certain range. It is very convenient to carry out control and managment.
 
4.Technical parameters:
Paramters Type:HT-LXP
5 25 50 100 150 200-2000
Inlet temperature °C 140~350 Automatically controlled
Outlet temperature °C ~80-90
Water evaporation capacity kg/h 5 25 50 100 150 200-2000
Drying form of centrifugal nozzle Compressed air Mechanism drive
Revolution of atomizer (r.p.m) 25000 18000 18000 18000 15000 8000-15000
Diameter of atomizing disc(mm) 50 100 120 140 150 180-340
Heating source Electricity Electricity+Steam Electricity+Steam,Oil fuel,gas Depends on the user
Max. power of electric heater (KW) 9 36 63 81 99  
Overall dimension (m) 1.8×0.93×2.2 3×2.7×4.26 3.7×3.2×5.1 4.6×4.2×6 5.5×4.5×7 Depends on practical conditions
Dried powder recovery rate % ≥95 ≥95 ≥95 ≥95 ≥95 ≥95

5.Pictures:
High Speed Centrifugal Fruit Juice Spray Dryer

5.Certification:
High Speed Centrifugal Fruit Juice Spray Dryer

6: Packing & Delivery:
High Speed Centrifugal Fruit Juice Spray Dryer

7. Our Customers:
High Speed Centrifugal Fruit Juice Spray Dryer

8.Contact information:
If you need further information, please contact us freely, we will do our best to cooperate with you.
 
 

Freestyle BMX is bicycle motocross stunt riding on BMX bikes. It is an extreme sport descended from BMX racing that consists of five disciplines: street, park, vert, trails, and flatland.

Flatland BMX occupies a position somewhat removed from the rest of freestyle BMX. People who ride in the above disciplines will generally take part in at least one of the others, but flatlanders tend to only ride flatland. They are often very dedicated and will spend several hours a day perfecting their technique.

Flatland also differs from the others in that the terrain used is nothing but a smooth, flat surface (e.g. an asphalt parking lot, basketball courts, etc.). Tricks are performed by spinning and balancing in a variety of body and bicycle positions. Riders almost always use knurled aluminum pegs to stand on to manipulate the bike into even stranger positions.

Flatland bikes typically have a shorter wheelbase than other freestyle bikes. Flatland bikes differ from dirt jumping bikes and freestyle bikes in one way. The frames are often more heavily reinforced because the people riding flatland often stand on the frames. This shorter wheelbase requires less effort to make the bike spin or to position the bike on one wheel. One of the primary reasons flatlanders often ride only flatland is the decreased stability of a shorter bike on ramps, dirt and street.

A variety of options are commonly found on flatland bikes. The most unifying feature of flatland bikes is the use of four pegs, one on the end of each wheel axle. Flatland riders will choose to run either a front brake, a rear brake, both brakes, or no brakes at all, depending on stylistic preference.

HI-TEN Material Freestyle Bike

Freestyle Bike Hi-Ten Material, Steel Frame Freestyle Bicycle, Steel Bmx Bicycle

Hangzhou Datasports Equipment Co.,Ltd(Oembicycle) , https://www.oembicycle.com

Posted on