Jinba Road Sweeper Portable Welder Generator,Deutz Marine Diesel Engine,Deutz Marine Generator Fengde Mechanical & Electrical Manufacturing Co., Ltd. , http://www.dieselgeneratores.com
Introduction Product Name: Jinba Road Sweeper Dimensions (length × width × height): 5970 × 2000 × 2380mm
Special function Jinba sweeping vehicle auxiliary engine and fan drive linkage set up original automatic clutch device. The device can ensure the automatic disengagement of the secondary engine from the fan when the secondary engine is started with no load and the secondary engine is stopped, simplifies the operation, reduces the impact of the secondary engine, and improves the reliability and service life of the secondary engine. At the same time, in addition to the display of the working speed, the sub-engine has an automatic record display of accumulated working time, which is easy to use, maintain and manage. The cleaning device has the automatic avoidance protection function and automatic reset function (has obtained national patent). After the sweeper encounters an obstacle, it automatically retracts and automatically resets after crossing the obstacle. This function effectively solves the problem of easy collision damage of the cleaning device. The gear position ensures good cleaning effect under various pollution conditions. It can also reduce operating costs accordingly. Injection-molded blade brush replacement is quick and easy, and there is a steel plate mixed brush brushing option; sweeping vehicle "center-mounted four-disc brush ---- rear suction nozzle" structure layout, cleaning width, cleaning efficiency , And is conducive to the cleaning device and suction nozzle adjustment and maintenance. Due to the short front suspension of this structure and the high ground clearance of the suction nozzle, the vehicle's passability during transit transportation is better. The pneumatic conveying system adopts a highly efficient dedicated fan that can digest and absorb foreign advanced road sweeper technology and can follow the road surface. The fully-floating full-floating suction nozzle has strong cleaning ability and low operating oil consumption. It can clean the common road waste, mud sand, small stones and light floats. The left and right front sweeps of the sweeping vehicles can work independently or jointly. In the use, selectively use the right or left front sweep to work independently. If the right front sweep does not work, the width of the occupied road is reduced, the safety of the working vehicle and the passing vehicle is improved, and the sweep wear is reduced, which is favorable for reducing Operation cost; adopts a unique manual pump emergency system to ensure that the working device can be lifted and lifted when the auxiliary engine is stopped, which facilitates inspection and maintenance; and the hydraulic system adopts a stack-type electromagnetic hydraulic valve group, which integrates the height and is arranged neatly. Reliable work and easy maintenance; All stainless steel tanks and tanks are used, large volume, continuous cleaning, long operation time, centralized control switch Installed in the cab, all electric control operations can be completed in the cab with heating and air conditioning.
Road sweeper maintenance 1, in order to avoid operating mistakes, sweeping vehicle control valve is mainly divided into the main valve and the secondary valve. Then where are the two main types of valves, where the power of the main valve comes from the chassis of the sweeper vehicle and the power of the secondary valve comes from the secondary engine of the dedicated functional part. Common road sweeper deputy engines include Chaochai, Jiangling and Cummins. The main valve manages the tilting of the shell behind the chassis and the hydraulic switch on the rear door of the compartment. The secondary valve manages the operation of the four floor brushes (which can individually control one side or all of the work) and the suction cup of the sweeper. 2, The secondary engine of the road sweeper is different because the engine brand is selected for different power, but the general speed is around 1500 to 1800 rpm. 3, according to the needs of the work can generally choose whether you need to bring the function of water spray dust, conventional configuration generally comes with post-spray, at the same time need to pay attention to the clean water tank is enough water, the general clean water tank capacity is different, there may be a gap in working time. 4. The pressure adjustment of the electromagnetic multi-way valve of the road sweeper is generally on the overflow valve. Users can adjust the pressure appropriately to change the speed of the sweep brush. 5, In addition, according to the road conditions, the sweeping vehicle can select whether the left and right brushes of the vehicle work at the same time. For example, if the sweeping corner is only used to open the corner, the brush is turned to work. 6, dust bins may have small dust deposits in the dust bins of the sweeping vehicles, and manual manual handling is required when cleaning the dust bins. 7. The distance between the sucker of the sweeping vehicle and the ground should be adjusted according to the condition of the road section. 8, sweeping vehicle dust suction pipe may often have dust and mud adhesion, need to be cleaned regularly to achieve better results. 9, the electrical parts in the control box need to be replaced in order to use a more stable one. 10. Sanitation workers should regularly check whether the functional parts are normal. 11, in order to avoid the foreign matter in the hydraulic oil will affect the normal operation of the electromagnetic control valve, sanitation workers should regularly check the hydraulic oil is normal. 12. Check whether the limit device of the clutch electric push rod of the secondary engine of the vehicle is normal. 13, sweeping car control button when the time interval should be 5 seconds 14. When a hydraulic part of the road sweeper is not working properly, check the circuit first and then check the circuit. (1) The possible causes of the abnormal circuit part are: disconnection of insurance, loose connection of circuit, broken line (2) The possible causes of the abnormal oil line may include: failure of the oil pump, rupture of the oil pipe, or oil leakage at the oil line connection, or malfunction of the solenoid valve.
China Automotive Network Road Sweeper Columns Listed by the Ministry of Industry and Information Technology of China Road Sweeper Vehicles Announcement All 6 Categories 111 Manufacturers 98 Road Sweeper Brands 770 Sweeper Products, Latest Road Sweeper Announcement, Environmental Notices , fuel announcements, exemption announcements, pictures, news, and the most timely information on prices of road sweepers. Total weight: 6495kg Rated load quality: 1500, 1435 Maintenance quality: 4865 Dimensions (length × width × height) 5970 × 2000 × 2380mm Approach angle/departure angle: 19/12 Front suspension/rear suspension: 1032/1638 Maximum speed: 90Km/h Chassis manufacturer: Dongfeng Motor Co., Ltd. Chassis dimensions (length × width × height) mm 5820 × 1940 × 2080 Number of axes 2 Wheelbase 3300 Axis load: 2595/3900 Number of tires 6 Tire specifications: 7.00-16, 6.50-16, 7.00R16, 6.50R16 Leaf springs: 8/9+5, 6/8+4 Front track: 1506 Rear track: 1466 Fuel type: Diesel emissions based on standard: GB3847-2005, GB17691-2005 State III The engine configuration adopts: Dongfeng Chaoyang Chengdu Yunnei Jiangsu Sida Anhui Quanchai Guangxi Yuchai Chengdu Chengfa Special Performance: When the number of quasi-passengers in the cab is 2 people, the rated loading quality is 1500kg, and when the number of quasi-passengers in the cab is 3 persons The corresponding rated load is 1435 kg. With the optional chassis cab.