From the perspective of the production and sales of passenger cars of various types, compared with the previous month, the production growth rate of all kinds of passenger cars in September was more than 1 percent both in comparison with that in the same period last year, of which the growth rate of cross-type passenger vehicles was the most obvious. to make. It is presumed that this is mainly due to the impact of the August holiday of major cross-country passenger vehicles. In September, the production and sales of basic passenger cars (cars) were 837,200 and 850,800, an increase of 22.03% and 19.71% sequentially, an increase of 13.81% and 15.81% respectively; sales and sales of multi-function passenger vehicles (MPVs) were 42,100 units and 4.03 units. 10,000 vehicles, an increase of 19.75% and 19.50% compared with the previous period, a year-on-year increase of 52.54%. The production and sales of sports multi-purpose passenger vehicles (SUVs) reached 162,200 units and 125,000 units, a year-on-year increase of 10.85% and 6.60%, a year-on-year increase of 74.37%. 79.89%; Cross-segment passenger car production and sales of 224,700 and 195,300, an increase of 60.09% and 24.22%, an increase of 17.94% and 5.84%. From January to September, the production and sales of all types of passenger vehicles showed an overall growth trend. The production and sales of passenger cars completed 9,885,300 and 9,989,500 vehicles, respectively, an increase of 38.07% and 36.68% year-on-year, respectively, of which the year-on-year growth slowed down to below 40%. Among all passenger vehicle models, the growth rate of multi-function passenger vehicles (MPVs) and sport utility vehicles (SUVs) is the highest, both over 80%, and the growth rate of sales of cars and crossover passenger cars is around 30%. .
U bend tubes are commonly used to transfer heat in process fluids with large radiators. The fluid is pumped along a tube, then through a u-junction, and then back along a pipe parallel to the inflow line. Heat is transferred to the wrapping material through the wall of the tube. This design is used for industrial applications where a number of u-pipes can be poured into oil containers containing a high thermal capacity.
Heat treatment
Heat treat each pipe after bending according to customer requirements or relevant standards to release pressure, temperature and holding time
Bending Stainless Steel Tubing,U Bend Pipe,Bendable Copper Tubing,U Bend Tube Murphy Thermal Energy Co., Ltd. , https://www.murphyfinnedtube.com