Color Wrap Film for car body wrapping have gloss,matte, metallic,chrome, chameleon,diamond,holographic,brushed finish and all car color wraps with imported Ishland glue and diamond air channels with good stretchable,very good to install and last long time outside over 3-5 years.
1.Water Resistant and UV Protected.
1. Clean off any dust, dirt or wax or other things before installation.
2. Measure the amount of protective film needed for the part to be fixed.
3. There is a transparent protective film on the surface which must be peeled off before use.
4. With a hair dryer, let the film be flexible and reduce wrinkles.
5. Even though it is waterproof, it cannot be completely submerged in water.
6. After assembly, please leave the car under the sun within 48 hours or do not wash the car in the meantime. Do not let the car stickers touch the water after installation for 48 hours.
Matte Car Wrap,Car Wrap Film,Car Wrapping Film,Gloss Car Wrapping,Car Wrapping Vinyl Guangzhou Fuyulai Technology Co.,Ltd , https://www.fylfilm.com
A company specialized in the production of crankshafts and connecting rods for the large diesel engine industry. The discovery of cutting fluids currently in use on its connecting rod production line will reduce tool life, especially during the boring process in the connecting rod machining process. Quark's QUAKECOOL® 370 KLG is recommended for the high hardness and high lubrication requirements of the customer's connecting rod material (hot forged high-carbon alloy steel), resulting in significantly longer tool life.
After using QUAKECOOL® 370 KLG, the boring tool life was extended by more than 50% at the same concentration, which significantly improved the production efficiency and saved the tool cost. The following table is a comparison table using the QUAKERCOOL® 370 KLG with the original cutting fluid:
QUAKERCOOL® 370 KLG is a high-performance heavy-duty extreme pressure cutting fluid based on Quaker's patented synthetic ester lubrication technology. With excellent lubricity, detergency, cooling and rust resistance, it is very suitable for harsh heavy-duty processing. This product does not contain sulfur and chlorine extreme pressure additives. It not only provides excellent protection for tools and parts, but also is environmentally friendly. It can be widely used in various types of ferrous or non-ferrous metal cutting, grinding processing applications.
In the entire metal processing process, the metalworking fluid only accounts for a small part of the total cost, which is usually less than 1%. This application case illustrates the importance of the right choice of metalworking fluid. The impact of metalworking fluids on the entire production process is several times its own cost, which makes its price less important. This is why Quaker has developed high-performance products at all costs to help customers reduce production costs and increase competitiveness.
QUAKERCOOL® 370 KLG adopts a fine boring process. The material is hot forged high-carbon alloy steel C7056. Its parts are connecting rods (diesel engine), using Mapal boring burrs, and the supporting machine tool is RBT 80 (Canada) with a machining accuracy of Ra<1.0μm. The spindle speed is 1600 rpm for the large bore, and 675 rpm for the fine bore. The feeding rate is 300mm/min, the diameter of the bore hole, the large head hole is 79.5mm, the small head hole is 49mm, and the use concentration is 8-10%.
2.Invisible Air-Release Channel, easily get rid of bubbles during installation.
3.Strong self adhesive, eliminate bubbles, peel and stick application.
4.Gloss and smooth finish.
5.Stretchable with heat.
6.Easy to clean with soap and water.
7.Long lasting for approximately 5 years indoor use and 3 years outdoor use.
8.It can also be applied onto most smooth painted or metalized surface such as cell phone, laptop, home appliances, table and even cabinet and much more.
Installation Tips
Quaker found that after using QUAKECOOL® 370 KLG, the boring tool life was extended by more than 50% at the same use concentration, which significantly improved the production efficiency and saved tooling costs.