All-in-one Roll Materials Cutting Machine
All-in-one Roll Materials Cutting Machine
Flying Man all-in-one cutting machine can cut the width of 1-700mm, thickness up to 0.8mm of the materials, suitable for non-woven fabric cutting, aluminum foil cutting, copper foil cutting, reflective film cutting, plastic film cutting, Kraft paper cutting, etc. This automatic cutting machine is suitable to cut the wider width and wider diameter of roll materials. Increase the feeding drum, can straighten the material easy to fold, increase the feeding frame reduction gear, prevent processing too fast lead to the material roll because of inertia knotting and rolling to the ground, resulting in material breaking pull deformation, slip and scratch.
This cutting machine has different models#FMHZ-400A/FMHZ-500A/FMHZ-600A/FMHZ-700A, cutting width from 1mm to 700mm, cutting thickness is different. The maximum cutting thickness is 0.8mm.
Roll To Sheet Cutter,Film Cutting Machine,Non Woven Cutting Machine,Non Woven Fabric Cutting Machine Suzhou Flying Man Assembly Automation Co., Ltd. , https://www.frmancuttingmachine.com
China's first large-tonnage compactor SR33YR was successfully launched in Shantui. The SR33YR waste compactor was driven by full hydraulic drive, which was more flexible and comfortable to operate. The work efficiency was significantly improved. The overall appearance of the machine was beautiful and generous. Technical centralized lubrication, centralized pressure measuring device; and installed air purifier; low temperature ether starting device; heating and cooling air conditioning; suspension seat; CD audio; rear view monitor; cab silicone oil damper. This machine is mainly used in large and medium-sized garbage treatment plants.