Due to its excellent performance, reliable measurement accuracy, and cost-effectiveness, electromagnetic flowmeters have been widely used in various industries such as petroleum, chemical, and wastewater treatment industries. At present, electromagnetic flowmeters can be divided into three categories. Everyone may have questions. Why do you need to obtain several types of electromagnetic flowmeters? Next, the technical Xiaobian of Heshunda flowmeters is aimed at classifying electromagnetic flowmeters. Analysis instructions for your reference. Because of the industrial needs, the conditions of use and the installation conditions are not always the same, in order to meet more customer needs. Actually, not only electromagnetic flowmeters, but also more and more types of flowmeters and non-standard products. For the time being, no one type of flowmeter can be used anywhere. The flow meter should consider the density of the medium, the flow range of the medium, the working pressure of the medium, the corrosivity of the medium, and the like. 1. Split electromagnetic flowmeter This kind of flow meter is based on certain induction principle to carry on the measurement of the conductive medium in the tube, mainly adopts the embedded technology of the one-chip computer. In addition, the CAN bus field bus was used on the electromagnetic flowmeter, and its technology has reached the international level. Split-type electromagnetic flowmeters are also capable of current signals for statistics and regulation, and are now widely used in the chemical, metallurgical, and papermaking industries. 2. Integrated electromagnetic flowmeter The principle of this type of flowmeter is the same as that of a separate electromagnetic flowmeter and can be used to measure the volumetric flow of a conductive fluid. Because its performance is unique, it can now be measured on different industrial conductive liquids. 3, plug-in electromagnetic flowmeter The principle of the plug-in electromagnetic flowmeter is also based on Faraday's law of electromagnetic induction. When a conductive liquid is used to cut magnetic force lines in a magnetic field, an induced potential is generated in the conductor. The induced electric potential E is: E=KBVD, K meter constant, B magnetic induction Strength, V Measure the average flow rate in the pipe section, D Measure the inner diameter of the pipe section. When measuring the flow rate, the conductive liquid flows through the magnetic field perpendicular to the flow direction at a velocity V. The flow of the conductive liquid induces a voltage proportional to the average flow velocity, and the induced voltage signal passes through two or more direct contact with the liquid. The electrodes are detected and sent to the converter through the cable through intelligent processing, and then the LCD displays or converts to standard signals 4-20mA and 0-1KHz output. As a professional R&D type flowmeter manufacturer, Heshun Flowmeter manufacturers have been persisting in the production concept of “quality and brand†and “brands and development†for the past few years. They persist in making unremitting efforts to tackle difficult problems and continuously develop new technologies and products. Our customers provide products with reliable quality and conform to the demand. At the same time, we have established a long-term cooperation relationship with many production companies. All colleagues of Heshunda look forward to working with you to set sail. Electric Leaf Blower,Garden Corded Leaf Blower,Electric Blower Garden Vacuum,Portable Corded Leaf Blower Vacuum Dtmade Manufacturing Co., LTD , https://www.dtmade.com