Adjustable angle hydraulic notching machine
1.According to the shear plate thickness are automatically blade gap adjustable device
2.Machine ,electrical ,liquid franchising shear angle adjusting mechanism
Description
1.The thing that sets our corner notchers apart from other sheet metal equipment out there is our patented blade gap adjustment that allows the operator to cut different thickness without any adjustments needed by the operator. This allows our blades to last longer and gives us a nice burr free cut.
2.Our machines shear with the blades in the negative position as well as the positive position. Which one you use is based on which part you want to keep, the finished part pulled from the machine (best is Negative) or the dropped piece (best is Positive). Negative cut allows for less deformation on the finished part. Negative cutting clamps the sheet metal down so there isn't any movement. Positive cutting will want to move the sheet away from the stops allowing for room for error.
3.The stop guides have dove tail grooves in the tail that allows for a tighter more secure guide setting, allowing our machine more accuracy and repeatability.
Notching Machine, Hydraulic Notching Machine, Manual Notching Machine JINAN EURO-ASIA MACHINERY CO., LTD , https://www.euroasiamachine.com
Equipment description: The machine is suitable for mixing and processing engineering plastics, modified plastics, masterbatch and other polymers, with uniformly dispersed, plastic coloring, filling modification and so on. This product can accurately measure the pressure change of the polymer, more standard quality control polymer blend material.
Technical parameter
Screw diameter
20,25,30optimal
Screw speed
0-80rpm frequency speed
Ratio
1:25,other ratio (10-30times)optional
Screw material
 38CrMoAIA special chrome molybdenum alloy tool steel, quenched and tempered surface, nitride, chrome, polished and ultra-fine honing process, hardness HRC55 ~ 60, the roughness Ra <0.4um, nitriding depth> 0.6mm
Cylinder material
38CrMoAIA special chrome molybdenum alloy tool steel, quenched and tempered surface, nitride, chrome, polished and ultra-fine honing process, hardness HRC55 ~ 60, the roughness Ra <0.4um, nitriding depth> 0.6mm
Heating area
District 4 mica barrel heaters, heater head a district, each district with copper heat sink, covered with stainless steel safety hood
Cooling device
Group 4 multi-wing ultra-quiet fan forced air
Reducer
Hardened reducer, ratio 18:1, tooth grinding, load torque, low noise
Melt pressure
0-35Mpa, precise monitoring of changes in pressure and flow fluctuations, that the pressure before and after the filter and filter differential pressure
Filter mask
(5-40) microns aperture, comply with relevant standardsÂ
Driving power
2.2Kw
Power supply
AC380V.50Hz three-phrase five line
Â
Equipment name: TY-7004 Laboratory single-screw extruder
Equipment description: The machine is suitable for mixing and processing engineering plastics, modified plastics, masterbatch and other polymers, with uniformly dispersed, plastic coloring, filling modification and so on. This product can accurately measure the pressure change of the polymer, more standard quality control polymer blend material.
Technical parameter
Screw diameter
20,25,30optimal
Screw speed
0-80rpm frequency speed
Ratio
1:25,other ratio (10-30times)optional
Screw material
 38CrMoAIA special chrome molybdenum alloy tool steel, quenched and tempered surface, nitride, chrome, polished and ultra-fine honing process, hardness HRC55 ~ 60, the roughness Ra <0.4um, nitriding depth> 0.6mm
Cylinder material
38CrMoAIA special chrome molybdenum alloy tool steel, quenched and tempered surface, nitride, chrome, polished and ultra-fine honing process, hardness HRC55 ~ 60, the roughness Ra <0.4um, nitriding depth> 0.6mm
Heating area
District 4 mica barrel heaters, heater head a district, each district with copper heat sink, covered with stainless steel safety hood
Cooling device
Group 4 multi-wing ultra-quiet fan forced air
Reducer
Hardened reducer, ratio 18:1, tooth grinding, load torque, low noise
Melt pressure
0-35Mpa, precise monitoring of changes in pressure and flow fluctuations, that the pressure before and after the filter and filter differential pressure
Filter mask
(5-40) microns aperture, comply with relevant standardsÂ
Driving power
2.2Kw
Power supply
AC380V.50Hz three-phrase five line
Â
Model NO.: Ty7004
Engagement System: Intermeshing
Screw Channel Structure: Non Deep Screw
Exhaust: Don′t Exhaust
Automation: Automatic
Computerized: Non-Computerized
Driving Power: 2.2kw
Power Supply: AC380V 50Hz
Screw Speed: 0-80rpm
Frequency Speed: Yes
Trademark: Tianyuan
Origin: Yangzhou
Model NO.: Ty7004
Engagement System: Intermeshing
Screw Channel Structure: Non Deep Screw
Exhaust: Don′t Exhaust
Automation: Automatic
Computerized: Non-Computerized
Driving Power: 2.2kw
Power Supply: AC380V 50Hz
Screw Speed: 0-80rpm
Frequency Speed: Yes
Trademark: Tianyuan
Origin: Yangzhou
Equipment name: TY-7004 Laboratory single-screw extruder