Use thermostat precautions

When using a thermostat, it is also necessary to have ideas. The correct way can make us more convenient to use.

Thermostat precautions:

1. Never disconnect or reconnect the cable between these two components when either the autosampler or the thermostat autosampler is energized. This will destroy the circuit of the module.

2. Unplug the power cord from the autosampler and thermostat to disconnect the autosampler from the line power. However, even if the power switch on the front panel of the autosampler is turned off, the autosampler is still powered. Make sure that the power plug can be removed at any time.

3. If the device is connected to more than the specified line voltage, it may cause danger of electric shock or damage to the instrument.

4, to ensure that the condensate pipe is always above the liquid level of the container. If the condensate pipe reaches the liquid, the condensate cannot flow out of the pipe and plug the outlet. This can damage the circuit of the instrument.

Thermostat features:

1. Instant temperature display, time decreasing display.

2. Automatic fault detection and alarm function.

3. Buzzer alarm alert function.

4. Temperature deviation calibration function.

5. Convenient module replacement for easy cleaning and disinfection.

6. Built-in over-temperature protection device.

7. High temperature resistant PTFE material.