Since the 13th Five-Year Plan, we all heard that new energy vehicles will become a direction for the development of the automotive market. To seize the market, some cities have already begun to build electric vehicle charging stations. Many riders are very curious and why At present, new energy vehicles have just entered the market, but they are already preparing for the charging station. Here we take a look at what kind of charging methods for the new energy electric vehicle charging stations? Everyone can understand ahead of time, and it can also be regarded as the development trend of the times. The new energy electric vehicle charging method is divided into the following four types: phase charging method, cross current charging method, fast charging method, and constant voltage charging method. Each type of charging method has advantages and disadvantages, and cannot use the same method for a long time. . First, the stage charging method usually refers to the use of two stages and three stages to achieve the charging process. This method is strongly recommended. Firstly, fast charging is achieved by combining the constant current and the constant voltage in two phases, and then the remaining power is charged by the constant current in three phases. Second, cross-flow charging method, often using this kind of charging method will affect the battery's power-reserving effect, because this method uses the voltage output from the battery's charging device to make the strength of the car's battery charge not change, but the same electric car. If this cross-current charging method is used for charging for a long time, the number of charging increases, and when the current exceeds the electrolyzed water, a large amount of gas will be generated, so it is not recommended that the constant current charging method be used. Thirdly, the fast charging method uses the inherent charge acceptance rate of a car battery to quickly charge, and can also be divided into pulsed, 2REFLEXTM, variable current/voltage intermittent, variable voltage, variable current wave, and other different methods. Each method has a different principle, so the charging speed is very fast. Fourth, the constant voltage charging method refers to maintaining a constant voltage value during the charging process. By keeping the voltage of the battery constantly increasing, the current will slowly decrease to achieve the best state of charge, but this method The battery has a large loss, but also will have a certain impact on the Service life of the car battery, so this method is generally not recommended. Chain Link, also called chicken mesh, is widely used in African and Southeast Asian countries. Chain Link has applied in different areas like animal fencing, railway, playground and so on. Chain Link Machine,Diamond Netting Machine,Crochet Net Machine, Chicken Mesh Machine Dovin limited , https://www.dovinmachine.com
