Stainless Steel Cut Wire Shot Conditioned
Stainless Steel Shot is a very useful Metal Abrasive for shot blasting, which could make die casting parts have a matte surface.
Generally, Stainless Steel Shot could be divided into two types. One is as cut one and the other one is conditioned one. The as cut one is obtained by cutting the stainless steel wire directorly. It has sharp edge and sometimes it may scratch the soft parts when shot blasting. So it is important to choose suitable Metal Abrasive. While for conditioned, usually there are three shapes and they are G1, G2, and G3. For our Longlived Stainless Steel Shot, there are even G4 one. It has been rounded four times and it is very similar with a sphere. It has a great effects on surface treatment.
Stainless Steel Cut Wire Shot Conditioned,Sus201Stainless Steel Cut Wire Shot Conditioned,Ss202 Stainless Steel Cut Wire Shot Conditioned,202 Stainless Steel Cut Wire Shot Conditioned Longlived Metal Products Co ., Ltd , https://www.tzlonglivedmetal.com
The underground mixing truck is a charging device that puts the raw materials or semi-finished products of explosives into the vehicle and mixes them into explosives after the blasting working surface is finished. The former Soviet Union C3Y-1 mixed vehicle can be used to install all the blastholes in the fan shape (the diameter of the blasthole is 60-105mm, the depth is 50m), the inclination angle is less than 45°, the diameter of the blast hole is 150mm, and the explosive transportation distance can reach 250m. The drug efficiency can reach 10t/h at a transport distance of 50m and 6t/h at a transport distance of 250m.
In the Swedish mixed-car, the latest research results have replaced the mechanical mixing device with a gas-pressure mixing device, and the weight of the entire device is reduced. The vehicle uses the S-753 hybrid charger for the blastholes with a diameter of 50-55mm and a hole depth of 15-20m. The charge efficiency is 50-70kg/min.