Walking in the rain is a very romantic thing, but falling in the rain is another matter. At the same time, when you drive in the rain, you may see a beautiful scene that is different from usual. However, if the vehicle is wading, your mood is not very good, and it will even affect your feelings in the days that followed. After a heavy rain, there will always be some vehicles that will wade. What should we do then? Today, let us discuss how to discuss vehicle wading.

车辆涉水该怎么做.jpg

We all know that the most obvious thing about water understanding is that water can be extinguished. Driving a vehicle involves wading, and the vehicle will turn off without a doubt. At this time, there are many owners of the car's approach is to subconsciously start firing the car again, this approach is grossly wrong. It will cause serious damage to you, and the startup system will be destroyed. The right thing to do is to observe calmly and rigorously the scenes of the area in which you are immersed in water, and what is the depth of the water level. Preventing the door from opening when you are not mentally prepared can result in damage to parts or paper documents in the car, and may even be life-threatening. Observe the Quartet environment, make the right decision, and wait for the rescue.

After your vehicle wading is rescued, you should not be overly excited and forget to check the damage of the vehicle. At the time, if the time involved in wading was high and the water level in the wading was high, you would have to quickly unplug the vehicle battery line so as not to damage more of the other electrical equipment in the car. Then there is a way to allow the water in the vehicle to flow out as quickly as possible. This can be done by opening all the doors to speed up the draining of water. Water may also undergo certain chemical reactions with the decorations. The decorations should be used after being sterilized and exposed to ultraviolet rays. Examine all the parts of the vehicle and send them to the place where the vehicle is to be repaired. Perform a rigorous inspection by their professional and see where they need to be repaired. Remember, you can't care about the treatment after the vehicle wading.

Vehicle wading is a relatively frustrating thing. Therefore, when driving a vehicle, pay attention to the road conditions.


Roller Shutter Roll Forming Machine

Roller shutter roll forming machine is high-efficient mould changing model machine, which is suitable for metal sheet.The roller shutter door roll forming machine is widely used in various industries, especially in the line of metal sheet manufacturing in small deal but in various hole-punching forming.
This machine is fully automatic and it is easy to operate to form shutter slats. It consists of one decoiler, sheet guiding equipment, roll forming section, PLC control system, Hydraulic cutting and collection table.


Specifications:

Raw material Pre-painted coils, Galvanized coils, Aluminum coils
Material thickness range 0.3-1.0mm
Rollers 10+5 rows
Material of rollers 45# steel with chromed
Shaft material and diameter 40mm, material is 40Cr
Forming speed 10-15m/min
Main motor power 5.5KW
Hydraulic power 3.0KW
Cutting type Hydraulic flying saw
Controlling system PLC
Voltage 380V/3Phase/50Hz
Way of driven 1.0 inch single chain transmission
Total weight 2 tons
Size of the machine L*W*H 6*0.8*1m

Working process:
working process

Decoiler - Feeding guide - Main roll forming machine - PLC control system - Hydraulic cutting - Collection table


Pictures for machine:

Shutter door Roller shutter

roller shutter door roll forming machine

Roller shutter roll forming machine

Roller shutter roll forming machine

Roller shutter roll forming machine

Roller shutter roll forming machine



Training and Installation :
1. We offer installation service local in paid, reasonable charge.
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation.


Certification and after service:

1. Match the technology standard, ISO producing certification
2. CE certification
3. 12 months warranty since the delivery. Board.


Our advantages:

1. Short delivery period.
2. Effective communication
3. Interface customized.

Roller Shutter Roll Forming Machine,Pu Roller Shutter Roll Forming Machine,Plc Roller Shutter Roll Forming Machine,Hydraulic Roller Shutter Roll Forming Machine,Roller Shutter Door Roll Forming Machine

YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn

Posted on