The wireless bridge is used in the monitoring system to set up a wireless transmission system, but how it connects to the front-end and back-end, and how to debug after it is connected. Today, Feng Runda takes the elevator environment as an example to describe how to install and debug wireless bridges.
One, the connection of the wireless bridge in the elevator
1. First install a network HD camera in the elevator. The signal from the camera is led to the top or bottom of the car with a network cable.
2. Install a wireless bridge at the top or bottom of the elevator to transmit the signal. Install another wireless bridge at the top or bottom of the elevator shaft as the receiving end to receive the signal transmitted from the front end and ensure the receiving end There is no shelter between the transmitters. The PoE interface of the PoE power module is connected to the PoE interface of the bridge.
3. The network cable led from the camera is connected to the transmitter bridge. The receiver then uses the network cable to direct the signal to the monitoring center network DVR.
Second, how to debug the wireless bridge
1, the computer's IP address and wireless bridge in the same network segment;
2. The names of the transmitter and receiver wireless bridges must be the same, and the SSID number must be the same.
3. Check the status of the wireless bridge, such as the signal of the connected device, the receiving/sending rate, and so on. Within the scope of the standard, it is normal, if not within the standard, find the reason for adjustment.
Third, how to avoid interference in the elevator in the wireless bridge
The 5.8G wireless bridge like Fengrunda Elevator has a very strong anti-interference ability and is much less disturbing than 2.4G in elevators. However, if there are multiple elevators, there may be co-channel interference. At this time, the channels of the bridges of adjacent elevators need to be opened.
CPVC Compound
CPVC Compound is
developed with unique advanced technology and currently production capacity have
fulfilled 3,000 tons per year. it has combined improved resins with state
of-the-art compounding technology to produce a family of compounds that offer an
outstanding blend of physical properties and excellent process ability These
compounding are customized solutions manufactured CPVC pipe systems for cold and
hot water from 1/2" to 2" CTS .
CPVC Compound for Pipes,CPVC Compound for Fittings,Resin CPVC Compound,CPVC Compound for Industrial,CPVC Powder for Pipes,CPVC Compound for Extrusion,CPVC Resin for Pipes,CPE Compound for Rubber
Shandong Novista Chemicals Co.,Ltd (Novista Group) , https://www.novistachem.com
