· Wuhan is expected to introduce "Taxis Tire Use Specification"

On April 23, the tire safety inspection of the taxi industry in Wuhan was launched in full swing. More than 70 taxi companies independently inspected more than 2,000 vehicles. All problem tire vehicles will be strictly prohibited on the road. Before April 30, 16,000 taxis in the city will be tested in batches.

At the same time, the responsible person of the relevant department of Wuhan Passenger Management Office will go to various companies to discuss. It is understood that Wuhan is expected to introduce the "Tax Tire Use Specification" as soon as possible to prevent potential safety hazards caused by second-hand tire abuse.

Detected more than 2,000 taxis on the first day

At 9:30 on the 23rd, Li Daobing of Datong Wufen Company was leading four staff members to inspect the taxi tires. "Do you use second-hand tires for your car? You can't afford to leave yourself and passengers safe." Li Daobing, while checking the tires, advertised to the taxi driver.

At 10:30 in the morning, Zhongchang Fu of Huachang Taxi Company drove the car to the company for routine punching, and Zhao Guoxiong, the deputy manager of operational safety, carefully looked at the tires. "These four tires have no bulging phenomenon, and the patterns are also relatively deep. Such tires have good friction. As long as they are driving normally, there will be no problem." Zhao Guoxiong said while checking.

At 2 o'clock in the afternoon, next to the repair shop of Datong Taxi Company on Jiangjun Road, more than 40 yellow triumph taxis that came to check were lined up, and the vehicle safety officer took the register and checked them one by one.

Yesterday, Wuhan City detected a total of more than 2,000 taxis, and the results of the self-inspection will be reported on April 30th.

Taxi companies increase penalties

On the 23rd, at the repair shop of Datong Company, the staff was installing tire changing equipment and tire dynamic balance detector. "In addition to the quality of the tire itself, whether the tire balances during high-speed driving also affects the safety of the vehicle. For this reason, we purchased the instrument and will test the tire for free." The relevant person in charge of the company said.

Yu Chuan, deputy general manager of Datong Company, said that the company will also establish a new security inspection system in the next step. Every time a taxi driver swipes a card, the safety officer will test the tires, and the vehicles that fail to meet the standards will issue a deadline for rectification notice; The supervision department will inspect the tires every week and register them, and the inspection reports will be summarized on the same day.

There are also some taxi companies that increase the penalties for drivers using safety hazards.

A taxi company in Wuhan warned the driver that once the use of second-hand retreading tires, tires, tire drums, etc. was found in routine inspections, a notice of rectification within a time limit would be issued, a fine of 300 yuan and three days of suspension.

Plans to introduce taxi tires

How to define the harmfulness of second-hand tires? How should the industry regulate? Yesterday, it was learned from the joint meeting of Wuhan Passenger Management Office that Wuhan is expected to introduce the “Regulations on the use of taxi tires”.

Datong Taxi Co., Ltd. said that it will use its own resources to purchase new tires with cheap and good quality in the next month, and sell them at a discount. The price is close to that of second-hand tires, so that there is no market for second-hand tires.

For the formulation of tire use rules, the person in charge of the new energy taxi company also said that according to the manufacturer's regulations, the tires must only be replaced after four to 60,000 kilometers, but many taxis often run for 80,000 kilometers. Use the standard.

In this regard, the relevant person in charge of the Wuhan Passenger Management Office said that after collecting the tire inspection reports of all taxis in the city, combined with the recommendations of the taxi companies, the taxi tire usage specifications will be considered to eliminate the tire safety hazards from the source.

Die Casting Mold Development

For die casting parts, die Casting Mold Development needs to be completed before production, and then the mold is used to produce the product. Therefore, the development of molds is crucial for die casting production. Reasonable mold structure design, smooth mold opening and closing, etc. directly affect the production efficiency and quality of die castings. Since die-casting needs to produce products on a high-temperature and high-pressure die-casting machine, the requirements for mold structure, strength, etc. are relatively high, so the development cycle and cost of die-casting molds will be relatively high.