Manual Saw Blade Pipe Cutting Machine 1. Servo motor driving feeding system with AC servo motor / C5 level ball guide screw and linear guide rail, fast, stable and accurate. Maximum feeding speed of 1000mm / s and feeding length of 1000m, multiple feed. Pipe Cutting Machine Blade,Manual Pipe Cutting Machine,Manual Saw Pipe Cutting Machine,Pipe Cutting Machine Saw Blade GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctklasercutting.com
ZHP-160L intelligent thermostatic shaking incubator is widely applied to germiculture, ferment, cross breeding and biochemical reaction as well as enzyme and cell organization research with the requirement of temperature and shaking frequency, it can be used for dynamic and static culture of microorganism cell and various fungi.
Features:
Integration of thermostatic incubator and shaker, one machine for two purposes; Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Microcomputer controls temperature and shaking frequency, with timing function, LCD can display the temperature and frequency continuously and accurately, it runs stably, constantly and reliably, with the functions of protections against the over temperature, power failure, electricity leakage, sensor fault alarming, etc.;Â
Both compressor and circulating blower employ the exported products, they are distinguished by environmental protection and freon-free refrigeration;
  AC brushless motor is used, boasting long service life, wide range of speed regulation, constant moment, constant rotation speed, maintenance free, etc.;
It adopts conception & aesthetics design, with the observation window. The internal bladder and shaking table is made of germproof stainless steel, and four corners are circular, taking convenience for cleaning.Â
Â
There is a switch for door, when the door is opened, the shaking system stops working, when it is closed, the shaking system starts automatically.
Special control speed-rotation circuit, can ensure that the shaking table starts slowly, speeds up stably, and also can prevent the liquid being splashing out, to guarantee the safety of experimental product. . Â
Through an independent temperature-limit alarming system (optional), the incubator can cut off the power automatically if beyond the limiting temperature, to guarantee the safety run of experiment and prevent the accident;
Â
With LCD display, the upgraded type intelligent thermostatic shaking incubator has more novel appearance, higher precision of temperature control, more stable of shaking frequency and more perfect protection besides above mentioned functions, meanwhile, it may be equipped with RS-485 interface (optional) that can be connected with printer and computer to record the change of temperature parameters.
Technical parameters
Model
Technical index
Shaking incubator (single layer)
ZHP-160 L
Volume
160L
Way of opening door
Single openingÂ
Power supply
~220V 50Hz
Range of temp.
RT+5~65ºC
Temp. resolution
0.1ºC
Temp. fluctuation
±0.5ºC
Temp. homogeneity
±0.5ºC
Shaking frequency
Single layer:40-280rpm
Â
Double layer: 40-200 rpm
Shaking mode
Cyclotron shake
Power
500 W
Working time
Continuous
Amplitude of shake
20mm
Ambient temp.
10~30ºC
(mm)Size of rocking plate
400×350
(mm)Outline size
600×580×1380
Timing range
1-9999min
The flask clamp is set at most (the normal configuration is universal spring clip)
Â
400×350 rocking plate (single layer):Â
Â
1000ml-4pcs.       Â
500ml-9pcs.         Â
250ml-14pcs. Â Â Â Â Â Â Â Â Â
100ml-30pcs. Â Â Â Â Â Â Â Â Â
Â
Remark
Note: "L" represent the temperature range RT+5~65ºC.
2. Gearbox driving Saw Blade, is produced by casting and processing by CNC machining center, which is stronger and more accurate. Inside, the core components of gearbox are imported from Taiwan, which produced with advanced milling and vacuum heat-treatment, so they are precise and long lifetime, lower noise and high transmission efficiency. Saw blade can work stable and process in long lifetime.
3.The special designed clamp has strong clamping capacity, firm, safe and reliable.
4. Automatic circulation of coolant ensures smooth cutting surface and long service life of saw blade.
5. Great Clamping device of pipes can decrease pipes vibration during working to extend saw blade lifetime and guarantee feeding speed with the Patent No.ZL 2009 1 0039079.8
6. Servo tail processing device, when the material is more than 100mm left, automatically cut the tail, avoiding that after the former automatic pipe cutting machine has finished cutting, the tail should be cut again separately, saving material and labor and improving production efficiency. Min tail length is 20-30mm.
7. Stop gauge is equipped, that used as keeping alignment of pipes and providing original point for system in order to improve preparing time and avoid the mistake of feeding by manual.
8. Control system is developed by Chittak that is with rich database, and can be updated. Easy operate.
9. It is equipped with an automatic detection and alarm information system, which is convenient for users to troubleshoot.
10.Using Mitsubishi PLC controller, the circuit is simple and the maintenance is simple, response is fast.
11.Can set 5 different cutting lengths for a single material to reduce waste of surplus materials.
12.Length digital display and easy setting and operating in control system.
13.The model can be updated with automatic loading system that can greatly improve efficiency and save the labor cost. Meanwhile, it can be equipped with conveyor belt to transport the finished goods to next machine process. All updated functions can be controlled by Cutting Machine System.
Applicable range: