The current environment is getting worse and worse, and the air quality has become worse. In order to reduce the value of PM2.5, diligent sanitation sprinklers are always silent on the streets. On this day, the sprinkler will certainly consume a lot of tap water. In addition to tap water, clean lake water can also be used, but this has to be on the premise of a lake. Given the cost, can the water in the bully's sprinkler be changed to Yellow River water or seawater?

1.jpg

According to industry professionals verify that seawater and Yellow River water can not be used for road surface watering operations:

First, the reason why seawater cannot be used:

Seawater contains sulfates and chlorine salts. For cement concrete, chlorine salts will accelerate its carbonization and have a negative effect on its durability. For asphalt pavements, it will accelerate the aging of asphalt and cause the aggregate to peel off from the road surface. Of course, this refers to the regular use of seawater spray. On the other hand, seawater spray has a huge impact on the concentration and composition of nearby soils and groundwater, causing deterioration of the ecological environment. Therefore, the spraying of seawater is similar to that of salt-melting snow, and the latter has been recognized as doing more harm than good.

Second, can not use the Yellow River water reasons:

Although Yellow River water will be more suitable for spraying road surface than seawater, it is not very suitable considering that the Yellow River water contains more sand and stones. Yellow River water sprayed on the road, yellow sand left on the road surface, may pose a threat to the air quality, the Yellow River water into the rain sewage pipe network may cause siltation. If you really want to use the Yellow River water to spray the pavement, you can filter or precipitate it first.

Also add one more thing:

When the bully sprinkler sprinkles water on the road, it can use recycled municipal sewage. The use of recycled municipal water reuse water as a water source for flushing roads, greening, landscapes, car washing, toilet flushing, etc. is a successful case at home and abroad, and is considered to be the most effective water-saving route at present and in the future.

Postscript: Protecting water resources and recycling urban sewage. If Yellow River water or seawater is used, it will not only affect the road surface but also damage the bully sprinkler.


Intergrated Design Batch Waste Tyre Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.

Batch Waste Tyre Pyrolysis Plant

Flowchat of Batch Waste Tyre Pyrolysis Plant

Batch Waste Tyre Pyrolysis Plant 

Advantages of Batch Waste Tyre Pyrolysis Plant

 

1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.

2.  Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.

3.  National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.

4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.

5.  Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.

6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.

7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.

8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.

 

Technical Parameter of Batch Waste Tyre Pyrolysis Plant

NO.

ITEM

PROJECT

1

Equipment Model

XY-7

XY-8

2

Door Model

Full Open Door

Full Open Door

3

Suitable Raw Materials

Rubber/Plastic Products

Rubber/Plastic Products

4

Structure

Horizontal Type Revolves

Horizontal Type Revolves

5

Reactor Size

Φ2200*6000mm  Î¦2600*6600mm

Φ2200*6000mm  Î¦2600*6600mm

6

Capacity for One Batch

5-6Mt; 8-10Mt

5-6Mt; 8-10Mt

7

Oil Yield of Tires

40%-45%

40%-45%

8

Work Pressure

Normal Pressure

Normal Pressure

9

Reactor Rotation Speed

0.4R/M

0.4R/M

10

Fuels Choice

Coal, Wood

Coal, Wood, Gas, Oil

11

Power

18KW/H

18-25KW/H

12

Cooling Method

Water Cycling

Water Cycling

13

Type of Drive

External Annular Gear

External Annular Gear

14

Heating Method

Direct

Direct

15

Type of Installation

With Foundation

With Foundation/Integrated Base

16

Noise dB(A)

≦85

≦85

17

Operation Mode

Intermittent Operation

Intermittent Operation

18

Total Weight(MT)

25-40

25-40

19

Installation Space Required

30m*10m

30m*10m

20

Manpower

3~4/batch

3~4/batch

21

  Shipment

Ф2200×6000=1*40HC+1*40FR

Ф2600×6600=2*40HC+1*40FR

Ф2200×6000=1*40HC+1*40FR

Ф2600×6600=2*40HC+1*40FR

 

Integrated Design Batch Waste Tyre Pyrolysis Plant

Integrated Batch Waste Tyre Pyrolysis Plant,Integrated Movable Waste Tyre Pyrolysis Plant,Large Capacity Used Tires Pyrolysis Plant,Integrated Batch Used Tyre Pyrolysis Plant

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com

Posted on