NIKKO Starter: S6D95, S4D95, 6D155, S6D102, DA220, S6D105
POINTS TO ATTENTION:
1- Keep a careful check on gear ring before installation, replace one if damages.
2-Installed surface of both motor and generator should be kept clean, Make sure the strength to the bolts.
3- Clean each connection port, Strictly observed the sketch, Make sure of firm connection and tight electric conduction.
4- Check if the key could be automatic
NIKKO Starter NIKKO Starter, NIKKO Starter Motor, NIKKO Starter Parts, NIKKO Auto Parts NINGBO ZHONGWANG AUTO FITTINGS CO.,LTD , http://www.autostarter-alternator.com
[ China Agricultural Machinery Industry News ] At the 2016 China International Agricultural Machinery Exhibition held recently, Hubei Agricultural Machinery Bureau and China Yituo signed a strategic cooperation agreement. China Yituo will build on the development of intelligent agricultural machinery for many years, according to the demonstration project of Hubei Province. Demand, development and application of agricultural machine front-loading for Beidou meter-level monitoring and centimeter-level assisted driving, real-time monitoring of agricultural machinery operation status, remote transmission of CAN bus data, online statistics of agricultural machinery operation information, tractor, harvester automatic driving and driverless driving, etc. Features.
Recommendation: The state gives intelligent agricultural machinery pre-installation policy support
In the three summers of this year, the harvester with the "smart brain" installed became a weapon. The operator sits in the cab, not only can locate the position of the harvester in real time, but also the sensor can collect the core data of the machine in real time, including the axial drum speed, the elevator speed, the engine running status, etc. on the display electronic screen. . The system can also collect the number of jobs and the trajectory of the operation to calculate the amount of money the farmer has to pay. It is no longer necessary to have a special person to measure as before, saving a lot of manpower and material resources. In addition, the remote intelligent satellite monitoring system for deep-slung operation of agricultural machinery used in large-scale operation of Sanqiu Agricultural Machinery has realized real-time and accurate monitoring of parameters such as trajectory, area, depth and time of agricultural machinery.
It is understood that the navigation and autopilot systems commonly used in China are installed by existing manufacturers on existing agricultural machinery. The cooperation between China Yituo and Hubei Province focuses on the development and application of the agricultural machinery front-loading of Beidou-class monitoring and centimeter-level assisted driving.
"At present, the application of automatic driving in China is still in the primary development stage. According to the statistics of China Yituo, the application of automatic navigation system is about 2,000 per year, all of which are post-installation. This is mainly because the national agricultural machinery subsidies are installed after automatic driving. Policy, but there is no clear subsidy policy for the pre-installation.†China’s Yituo Marketing Minister Qi Haifeng recently stated at the 2016 China Agricultural Mechanization Forum that “smart agricultural machinery needs to be developed rapidly, mainly relying on agricultural machinery manufacturing enterprises, so it is recommended that the state give Policy support for smart farm front-loading subsidies."
Compared with the navigation equipment and the autopilot supplier's post-installation of agricultural machinery, the navigation system and working condition monitoring system installed in the agricultural machinery manufacturing enterprise have more advantages. First, the pre-installation system of the manufacturing enterprise can be completely matched with the host, and a lot of experiments have been carried out in the process of product development, and the reliability is better. The post-installation system is modified on the mainframe and the matching is relatively poor. Compared with the relatively good assembly conditions of the manufacturing company and the detection conditions before storage, there are certain gaps in the installation conditions of the after-installation system. Second, the cost of the front loading is relatively low. From the comparison of the cost of the front and rear loading of the American automatic driving, the front loading is 20% to 30% lower than the rear loading. Third, the service system of agricultural machinery manufacturing enterprises is relatively complete, and the services are more timely and effective.
In order to improve work efficiency, increase user income, and improve the utilization rate of agricultural machinery, China Yituo has been committed to the application of artificial intelligence in the field of tractors in recent years. As early as 2009, it launched an automatic driving system based on GPS navigation. The National III product that has been fully switched this year has been digitized, and the engine is automatically controlled by the logic control of the ECU.
The first unmanned tractor in China, which was released shortly before China, Dongfanghong LF954-C is equipped with National III engine, power reversing gearbox, electronically controlled suspension system and a series of information and control systems using millimeter wave radar. Advanced technologies such as measurement and binocular camera visual recognition, combined with Beidou high-precision positioning technology, can be applied to farmland ploughing, finishing, plant protection and other operations, which has aroused the industry's high attention.
(Original title: Intelligent agricultural machinery front loading system requires policy support)