High-low temperature damp heat test box compressor oil filter troubleshooting method High and low temperature damp heat test box compressor oil filter troubleshooting approach, oil filter is through the oil and air compression, separation, after cooling in the cooler, and then back In the oil and gas tank, the oil filter passed before the oil and gas tank filters out impurities to ensure that no impurities are introduced into the machine head to prevent the occurrence of phenomena such as clogging of the nose with excessive impurities. This is the result of oil filtering. effect. For the treatment of oil filter failures, the compressor repair sums up such points briefly today.
The final product will be 40%-45% tire oil (fuel oil), carbon black and 35% carbon black, 10% steel and another 5-10% recycled gas (CH4-C4H10).
Free Installation Tires Pyrolysis Equipment,Waste Tires Pyrolysis to Oil Equipment,Free Installation Pyrolysis to Oil Equipment,Latest Waste Tyre Pyrolysis Machine Henan Lanning Technology Co., Ltd , https://www.lanningrecycling.com
First, check whether the machine can operate normally or if it is abnormal. If there is no noise in the sound of the oil filter, the oil filter is normal.
If there is an abnormal sound from the oil filter, stop the machine at this time, then remove the oil filter and perform a certain test on the oil filter.
The oil filter is likely to accumulate a lot of different impurities when filtering oil and gas impurities, so be sure to replace the oil filter with a period of time.
When cleaning the oil filter, it is necessary to wash it with special medicine. This can ensure that the oil filter can clean the dirt inside.
Screw compressor is a common compressor in the compressor. The failure of the screw compressor will affect the service life and the operator's personal safety. Therefore, in the industrial production, understand the screw compression. The problem of machine failure and the solution to it are very important.
The main process is to pyrolyze the tire into oil and gas by directly heating the reactor;
The condenser or cooling tube will cool the gas to a liquid oil with the aid of circulating water;
Then, the remaining gas that cannot be cooled into liquid oil is recycled to the reactor heating system; after the oil and gas is completely discharged, the reactor is stopped to be cooled, and the reactor below 70 degrees is cooled; then the door can be automatically opened and the carbon black can be discharged. .
The capacity of each batch of products ranges from 5 tons to 20 tons.
LN-2200-6000 capacity 5-6 tons
LN-2200-6600 has a capacity of 7-8 tons
LN-2200-8000 has a capacity of 9-10ton
LN-2600-6600 has a capacity of 10-12ton
LN-2600-8000 has a capacity of 12-14ton
LN-2800-6000 capacity is 10-12ton
LN-2800-6600 has a capacity of 12-14 tons
LN-2800-8000 capacity is 15-20ton
If cut into small pieces, it can handle more.