The full name of the compressed Garbage Truck is a compact garbage truck. This type of sanitation special vehicle adopts a totally enclosed model. When garbage treatment is performed, the sewage can be completely closed to the sewage tank for treatment, and the garbage transportation is completely solved. Secondary pollution occurred. It has brought convenience and efficiency to the sanitation cleaning work. However, during the use of any vehicle, it must be maintained in order to reduce the chance of machine failure and extend the life of the vehicle. However, do you know how to compress the garbage truck? And see how the following knowledge is introduced. Firstly, in the process of using compressed garbage trucks in peacetime, we must regularly check the condition of the harness connection of the vehicle. The specific method is to visually check whether the harness on the garbage truck has broken skin, loose and poor contact. The situation occurs. If not, it means that the vehicle is operating normally. If these phenomena occur, it is recommended that the driver immediately go to the vehicle service center to do further inspection and maintenance of the vehicle. Second, do a check on the tire air pressure and tire wear conditions on the compressed garbage truck , and check if the machine has loose nuts. This method of inspection is best kept once a week. The specific method is to conduct visual inspections, and then further tests to allow the vehicle to move to see if it is running or when it is running. If this happens, don't continue to use it very much, otherwise it is very likely that there will be a security accident in the process of compressing the garbage truck. It is recommended that the driver must go to the surrounding after-sales points and service points for vehicle balance checks until he is qualified to work again. Thirdly, when the garbage truck is used, it is necessary to periodically check whether the chassis of the vehicle is leaking or leaking. Most of the chassis used to compress garbage trucks are manufactured by big manufacturers. Once the chassis of these garbage trucks are in trouble, they can go to the national post-sale service point for maintenance. Therefore, when sanitation workers drive compressed garbage trucks, once the vehicle chassis is visually detected, they must be promptly repaired at the point of sale. Don't use your hands blindly to avoid causing damage to the machine. Rural Sanitation Vehicles,Fecal Suction Tank Truck,Vehicle-Mounted Trash Cans,Vacuum Fecal Suction Truck Henan Lukewei Road Machinery Manufacturing Co.,Ltd , https://www.lkwmachinery.com