As the saying goes, often there is not wet shoes on the river. Driving a car will inevitably encounter torrential rains that will suddenly come. If the road is low, or if some pits will accumulate a lot of rain in a short time. When we passed the car, we couldn't be nervous because we lost the ground information and it was easier to get into the puddle. When encountering low-lying stagnant water roads while driving, do not rush through water, stop and observe, and get off the train if necessary. If the water level is too high, it will be dangerous to continue driving at more than half the height of the tire or the height of the chassis; too fast will increase the depth of the actual wading of the car; if there is a large vehicle ahead, try to stay away from it. Do not force the above situation. Keep the vehicle at low speeds and high speeds when passing the water, so try to drive in low gear. Do not stop before reaching a place where there is no water, do not shift gear, do not put throttle, do not accelerate, keep a uniform low speed so as not to cause water waves to cause the vehicle to enter the water. The wading rear brake system of the automobile is basically completely immersed in water, and it needs to discharge the accumulated water between the brake pads in time. In particular, vehicles using drum brakes will lose their braking capacity and cause serious traffic accidents. In the vulgar time when the accelerator pedal and the brakes at the same time, the brakes should be light, so that the operation many times, with the brake pads and brake disc friction heat to evaporate water. If the car is extinguished in the water, don't be nervous and don't start it again. This will cause water to enter the engine and cause serious damage. Due to the high temperature of the engine during operation, the components such as the crankshaft, connecting rod, etc. will be deformed due to the sudden cooling during the intake of water. The poor movement of the piston will also result in severed cooling of the connecting rod. If you have bought wading insurance, the damage to the insurance company caused by the second start-up will not be compensated. Otherwise, it will be an escort. Remember to remember! Timely dial the SOS phone, send the car to the maintenance station, and explain to the maintenance personnel the reason why the flameout is caused. In order to avoid damage to the engine due to improper operation during the maintenance process, the insurance company is not compensated, and can only bear the maintenance cost. Razor Mold ,Disposable Razor Mould,Shaver Injection Mould,Razor Injection Molding Mold NINGBO KAYDO PLASTIC COMPANY LIMITED , https://www.kaydo-china.com