Tattoo robots may have stable "hands" in the future, but how do you know that it won't accidentally tattoo your bones? This is all I can think of and is advertised as "the first in the world of tattoo robots." You can see how tight the tattoo is for you having been tied to a chair.
Sack gabion is
cylindrical basket made of 8x10 double twisted steel woven wire mesh,
with mechanical characteristics higher than the ones suggested from EN
10223-3. It's filled with stones at the project site to form flexible
and permeable structures used for emergency and river training works
where local conditions require fast installation or where the water does
not allow for easy access to the site and where underwater installation
is necessary.
Sack Gabion Specification
Sack Gabion,Wire Mesh Sack Gabion,Coated Sack Gabion Box,Pvc Coating Sack Gabion ANPING KINDELONG WIRE MESH CO.,LTD. , https://www.wire-mesh.org
In addition, it's beautiful to see the robot put into use. This creates a good self-proclaimed first robot-trace artist. There are several steps in the process of tattooing by the robot. You have to create a 3D scan of the target area, use custom computer software to simulate the desired tattoo, and then (as we mentioned earlier), make sure people stay very, very quiet. After all, tattoo robots are incredibly precise.
Has anyone been harmed in this process? Feel like a handmade tattoo? And are there any plans to make this robot more extensive? I hope to quickly popularize such robots,
Sack gabions are
supplied with steel reinforcing wires inserted during the manufacturing
process to facilitate closing during installation. The wire used for
the manufacture of gabion shall have a tensile strength between 3
80-550N/mm2 exceeding, in order to increase the tensile resistance of
the finished products, what is suggested from EN10223-3. Wire tolerances
are in accordance with EN 10218. Elongation shall not be less than 10%,
according to EN 10223-3. Test must be carried out on a sample at least
25 cm long. Meantime the adhesion of the zinc coating to the wire shall
be such that, when the wire is wrapped six turns around a mandrel having
four times the diameter of the wire, it does not flake or crack when
rubbing it with the bare fingers.