Stainless Steel SS304 Sanitary Milk Centrifugal Pump with Open Impeller Material:Â
The first type is the bare pipe water wall. This is the simplest structure of the water wall. The advantage is that ordinary seamless steel pipes can be used, and it is more convenient to replace the water wall pipe. The disadvantage is that the temperature of the furnace wall is still high, and heavy refractory bricks are required. The steel frame of the corresponding boiler should be strengthened. , The air leakage of the furnace wall is relatively large. Old-fashioned high-pressure boilers and medium and small boilers are used more frequently.
The second tupe is the membrane water wall. The membrane water wall is welded by seamless steel tubes with fins. The Water Wall Tubes are connected by fins to make the water wall into a whole. This kind of water wall is called a membrane water wall. Its function is to strengthen the heat transfer of the water wall and greatly reduce the temperature of the furnace wall. The furnace wall does not need refractory bricks, but only requires thermal insulation materials. Compared with the conventional heavy furnace wall, the weight can be reduced by 60% ~ 70%, the furnace wall heat storage is reduced by 80%, the start and stop time is shortened, and the fuel consumption is reduced. The load of the furnace steel frame is greatly reduced, saving refractory materials and steel.
The third type is the pierced pipe water wall. The barbed pipe water wall pipe is made by welding many grab nails with a length of 20 to 26 mm and a diameter of 6 to 12 mm on the water wall pipe. It is mainly used to lay the gas belt. Generally, for boilers that burn fuel with low calorific value and low volatile content, in order to stabilize the fire, pierced pipe water walls are often used for laying the fire protection belt.
Wall Mounted Boiler,Water Wall Tubes,Wall Mounted Combi Boiler,Water Wall Tubes In Boiler Jinan Yuanda Power Equipment Co.,Ltd. , https://www.ydpowerequipment.com
Applications
Our pump is a highly efficient and economical centrifugal pump, which meets the requirements of sanitary and gentle product treatment and chemical resistance. It is available in nine Sizes, KS-5, -10, -15, -20, -25, -30, -35, -40, -45...
Standard design
Our pump consists of a standard motor, stub shaft, mechanical compression coupling (KS-5 with pin bolts), adaptor, back plate, impeller, pump casing and shaft seal. Our pump is designed for CIP withemphasis on large internal roundings and cleanable seals. The sanitary stainless steel cover for protection of the motor, and the complete unit is supported on four adjustable stainless steel legs and Shaft seals. The pump may also be equipped with a double mechanical shaft seal.Â
Features
Motor
0.55-22Kw(KS)
Impeller
Open type(KS)
R/minjkl speed
2900rpm(50Hz),3600rpm(60Hz)
Flow
1.5-120m3/h(KS)
Lift
75m(KS)
MAX pressure
7Bar(Ks)
MAX temperature
120°C/248°F
Connection
Clamp, Thread, Flange, Welding
Standard
DIN, SMS, 3A, ISO, IDF, RJT
Â
Design and Standard
Design based on 3A hygienic standard
Adjustable stainless steel leg
Mechanical seal: single mechanical sealÂ
Flushed single mechanical sealÂ
Flushed double mechanical seal
Motor housing: Cold rolled stainless steel plate
Investment casting impeller: AISI 304/316L
Contact parts with material: Viton, EPDM
Gasket: SSC-Sic/EPDM
Internal surface: Ra≤0.8um
External surface: mirror polish
Technical data
Packing &Â Shipping Information
Packaging
Plastic   →   Carton   →   Wooden case
Delivery Port
FOB Shanghai Port or Ningbo Port
Shipment Terms
FOB, CFR, CIF, EX-WORKS
Payment Terms
L/C, T/T, D/P, Paypal, Western Union
Minimum Order
5 Sets
Delivery Lead Time
7 days after order is comfirmed.
Export Market
North America, South America, Southeast Asia, MID East, Western Europe ,etc
More Products
Sanitary valve
Sanitary Butterfly Valve
Sanitary Check Valve Sanitary Ball Valve Sanitary Reversal Valve Sanitary Diaphragm Valve Sanitary Sample Valve
Sanitary Pipe Fitting
Sanitary Elbow
Sanitary Tee Sanitary Reducer Sanitary Cross Sanitary Triclamp Ferrule Sanitary Cap Sanitary Pipe Hanger Sanitary Tank Cleaning Ball Sanitary Hose Joint Sanitary Unions Sanitary Sight Glass Sanitary Strainer
Sanitary Manway
Sanitary Round Manway without Pressure
Sanitary Round Manway with Pressure Sanitary Square Manway Sanitary Oval Manway
Sanitary Pump
Sanitary Centrifugal Pump
Sanitary Lobe Pump Sanitary Self Priming Pump
Sanitary Tank
Storage Tank
Fermentation Tank Mixing Tank Warm-keeping Tank
Sanitary Tube
Seamless Tube
Weldless Tube
Sanitary Gasket
Silicone/EPDM Gasket for Triclamp
Silicone/EPDM Gasket for Union Silicone/EPDM Gasket for Butterfly Valve
Contact Us
Manager
Ms Nicole
Â
Â
Tel
86 577 86995593
Mob
86 13868619307
Adds
NO.1 CANGNING ROAD,SHACHENG STREET,WENZHOU ECONOMIC AND TECHNOLOGICAL DEVELOPMENT ZONE,WENZHOU CITY,CHAINA
Â
The boiler water wall is the main radiation heat surface, arranged inside the boiler chamber and proceeds the heat exchange directly with the high temperature flame. The convection tubes are the convection heat surface of the boiler, arranged between the boiler chamber outlet and the end heat surface and proceed the heat exchange directly with the high temperature fume. The water wall and convection tubes are the main heat surface of the boiler, the tubes diameter for both generally usedΦ 51-60mm boiler steel tubes, also as the request.
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Since Irrigation Centrifugal Pumps
Impeller: Open
Usage: Pump
Mechanical Seal: Mechanical Seal
Motor: ABB/Siemens/Chinese Brand
Connection: Weld/Clamp/Thread/Union
Motor Cert: UL Motor
Pump Cover: Square/Round
Max Temperature: 120 Centigrade
Max Working Pressure: 5bar
Material: SS304, SS316L
Interface Finish: Ra Less Than 0.8um
Impeller Speed: 2900rpm ( 50Hz), 3600rpm (60Hz)
Trademark: DEYI
Transport Package: in Strong Exporting Wooden Case
Specification: 3T-100T
Origin: Made in China
HS Code: 8413709990