[Pacific Auto Network to raise a car] Dongfeng Honda's tenth generation Civic after the listing is strong, the appearance of high value, 1.5T model maximum horsepower 177PS/6000rpm, the lowest level of driving focus and sitting position captured a lot The young man's heart, codenamed L15B8 engine started the first shot of Honda's turbine, and some people think that the maintenance cost of the model with T will be high, is that true? Let's calculate it today. Honda Civic 1.5T model maintenance manual recommended replacement period for oil filter every 1 year, air filter 20,000 kilometers, fuel filter every 80,000 kilometers or 4 years, fuel additive is 0.5 million kilometers or 6 months, Brake oil is 30,000 kilometers. It is worth mentioning that both the oil and the oil filter can be replaced as needed, which will reduce the maintenance cost for users who have low frequency of use and excellent environment. It is only the manufacturer's requirement to use fuel additives that many consumers cannot accept. In addition, Honda Civic's small insurance costs are around 714 yuan (the project contains oil + Machine Filter + fuel additive), if the car owner wants to let the car "drink" a little better oil, 4S shop can choose to replace full synthetic or semi-synthetic The price of the oil is: 283 yuan / 4L of the original 0W-20 SN grade semi-synthetic motor oil and 372 yuan / 4L 5W-40 SM grade fully synthetic motor oil. The total cost of routine maintenance within 20,000 kilometers a year is about 14,938 yuan (1.0T models) / 14,740 yuan (1.5T models), the average monthly cost is 1245 yuan (1.0T models) / 1228 yuan (1.5 T model). Of course, this is the cost of maintenance according to the manufacturer's recommended replacement cycle. If you replace it as needed, the actual maintenance cost will be lower. In general, Honda Civic's maintenance costs are slightly higher, and manufacturers demanding the addition of fuel additives are the main reason for this result. (Photo / text / photo: Pacific Auto Network Su Shi) #car maintenance#
The oil-gas Separation Filter is a device that separates the micro oil droplet to ensure that the lubrication system can work well and almost no micro oil droplet goes out of the air flow of the compressor . Applications: Solid-liquid, gas-solid, gas-liquid separation and purification in the fields of petroleum, chemical, metallurgy, aviation, electronics, power, pharmaceutical, environmental protection, atomic energy, nuclear industry, natural gas, refractory materials, fire-fighting equipment, etc.
The air from the compressor mains is filled with oil droplets of different sizes. Large oil droplets are easily separated by the oil-gas separation tank, while small oil droplets (suspended) must be filtered by the oil-gas separation filter. The correct choice of glass fiber diameter and thickness is an important factor to ensure the filtration effect. After the element filtered, the small oil droplets are quickly polymerized into large oil droplets, which go to the bottom of the Filter Element. These oils are returned to the lubrication system through the inlet of the return line at the bottom of the filter element, allowing the compressor to discharge relatively pure, high-quality compressed air.
Gas Filter,Oil Separation Filter,Separation Filter,Oil Separator Xinxiang Shengda Filtration Technique Co., Ltd. , https://www.filtrations.nl Need to use fuel additive Honda Civic car cost analysis
Experience reading mode
2017-10-06 00:19:21 Author: Su Wei Qi