Steel-drawer
Model:XY-P80 XY-p120
Specification:
The Steel-drawer pull out the whole bar, the sidewall because of the role of the pull mouth,promoting rubber tearing, smoothly separate wire and rubber.
Advantages:
1.This equipment adopts double vane pump to supply oil, low working noise, at the same time to ensure the speed and pressure of the drawing cylinder when working, and improve the working efficiency and the service life of the valve.
2.The automatic lifting device is adopted to reduce the labor intensity of workers;
3.The inner guide rail positioning, make sensor reliability retractor positioning highly accuracy, drawing cylinder operation smoothly.
4.Using manual automatic exchange of work,flexible choice.
Automatic Feeding Machine
Model: XY-AL200 / XY-AL500 / XY-AL800 / XY-AL1200
Specification:
Automatic feeding machine mainly through the use of 60 tons of hydraulic pressure as the driving force, can be used to push scrap plastic/ tires with hydraulic column extrusion into reactor, the whole operation process is stable, simple and convenient.
Advantages:
Fully automatic design, save time and manpower;
Highly improve the feeding capacity: manually feeding can only reach 150-170KGS/m³. By using the automatic feeding machine, it could reach to 240-280KGS/m³, which greatly improve the feeding capacity.
Model: XY-C800 XY-C1200
Specifications:
The tyre cutting machine is applied to cut all kinds of rubber blocks and strips,it is good for cutting rubber tyre,rail tyre, rubber strips etc.
Advantages:
1.This machine with large cutting knife,good shearing effect,fast cutting speed and low energy consumption;
2.Small size, easy to move;
3.Adopt hydraulic system, easy to operate and very safe design.
The Whole Tyre Crusher
Model: XY-SH800 / XY-SH1200
Specifications:
At the room temperature, put the tyre or large plastics of rubber into the press directly,which can be crushed into 1-8cm pieces.
Advantages:
1.Compact structure, advanced technology, low energy consumption, high efficiency;
2.The crushing chamber is an open structure,which is convenient for maintenance;
The knife is made of hard alloy steel, which has high hardness, high wear resistance and can be used repeatedly;
3.This machine adopts the hardened reducer, round screen for structural steel wire mesh, large blanking area,which is good for qualified rubber material screening.
Tyre Steel Drawer,Automatic Feeder, Assistant Equipments Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl
Medical stone is used by many companies for water purifiers or biological, physical filtration devices. The use of medical stone in agriculture and horticulture can promote plant growth.
As a feed additive for cattle, pigs and chickens, Maifan Stone can promote the healthy growth of livestock.
Medical stone has long appeared in Chinese medical literature. For more than 2,000 years, medical stone has been used to treat skin diseases, wounds and antidote.
Maifan stone can be taken either internally or externally. It was only in recent years that a scientific analysis of the composition of medical stone was carried out. Studies have shown that the role of medical stone as a catalyst in water is essential to the human body.
Due to its strong adsorption and mineral release properties, it can be used to activate, purify and remove harmful substances from the water.
The efficacy of Maifan Stone in providing quality and safe drinking water has attracted a lot of attention.
Maifanshi constituting maifanite genus volcanic rocks, volcanic minerals are mainly. Maifan Stone is believed to be buried in the volcanic volcano from 5,000 to 75,500 years ago. It is formed by the acidity of the volcanic high-humidity, hot springs and the pressure generated by the changes in the earth's crust. It can be inferred that the maifan stone is produced in the volcanic zone.